Maintenance and repairing work in 415V OH line from Kedla Washery to Check post upto Chutwa Nala bridge

Amount

Dismantling of pole/street light standard/strut embeded in cement concrete foundation etc. as required.

Dismantling of overhead lines comprising of copper/alluminium OH conductor, GI wire, cross arm insulators etc as required.

Erection of steel tubular or rail pole strut in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling etc above 8m and upto 11m.

Erection of all aluminium conductor of 7/1.96mm to 7/3.10mm diameter including binding etc as required.

Supply of channel iron 75mmX40mmX6mm (7.14Kg/m) cross arm for 4 wire overhead line complete with clamp, bolt, nut and washer etc including drilling of holes for indsulator pin etc. (as per drawing) and painting with primer and finished paints as required.

Erection of angle iron/channel iron cross arm on wood/RCC/PCC/ steel tubular/rail pole etc. as required.

Supplying and erection of stay set complete (galvanised) with 19/20 mm dia X 1.8 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm, thimble, stay clamps, turn buckle ( 20 mm X 60 cm ), 7/ 3.15 mm dia G.I. stay wire and strain insulator etc in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling etc. as required.

Supplying and erection of 100mm X 65mm pin insulator complete with GI spindle bolt and nut etc as required.

Supplying and erection of 75mm X 90mm shakle insulator complete with GI bolt, nut and strap etc as required.

Erection of GI wire no. 8 SWG including binding etc as required.

Supply of GI wire 8 SWG

Supplying and fixing of 32m dia X 2m long GI pipe (medium class) bracket for mounting of fluoroscent/HPMV/HPSV street light fitting on pole including bending the pole to the required shape, 2nos. 40mm X 3mm flat iron clamp with nut, bolt and washer, painting the flat iron with primer and finished paint etc as required.

Supply of 100W street light

Supplying of two lenths of channel iron 75mm X40mm X6mm (7.14Kg/m) double pole cross arm for three wires 11KV overhead line conductors complete with through bolts and nuts for clamping to the poles, 50mm X 6mm MS flat welded on one side of the channel iron and with bolt and nut with other side for tying the cross arm togather, including drilling holes for insulators pins/fitting, bolts, nuts and washer etc (As per drawing) and painting with primer and finished paint as required.

Erection of double pole three wire cross arm for 11KV/22Kv/33KV OH lines as required.

Pole painting (with 1 coat red oxide and aluminium paint) on tubular pole.

Total impact of GST for the purpose of CTC

M/s Achal Electricals

M/S VAISHALI ELECTRIC COMPANY