REPAIRS TO ROLLING SHUTTERS COLLAPSIBLE GATES JOINERY GRILLS ALUMINIUM DOORS WINDOWS PARTITIONS AND CONNECTED WORKS AT LRDE CAIR AND MES PREMISES UNDER AGE B R I UNDER GE I R AND D WEST BENGALURU

Taking down chowkat or frames with shutters (without taking off shutters from frame) n. exc 1.50 sqm each and removing from site all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, including making good to jambs with cement mortar 1:4 and finished to match with existing surface complete all as specified and directed.

S&F to frame factory made solid PVC door shutter 30mm thick (style) considering of frame made out of MS tubes for top and bottom rail, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck in side with solvent cement for stiles and plain colour PVC sheets for top rails and bottom rail on side and on gap insert for top rail and bottom rail panelling of plain colour PVC shutter to be fitted in MS frame welded/sealed to the stile, rails with suitable PVC sheet beading and jointed to gether with solvent cement complete all as specified and directed..

S&F for 40 mm thick flush shutters, solid core construction, with block board core & plywood face panels, two faces covered with decorative face veneer with lipping / frame to match complete all as specified and directed.

S&F for 35 mm thick flush shutters, solid core construction, with block board core & plywood face panels, commercial panel on both sides complete all as specified and directed.

S&F for plain framed, panelled shutter 35mm thick (two panel) with lock rail & panel of 9 mm thick B.W.P commercial ply or 12 mm thick veneered particle board with commercial veneering on both faces. 2nd Class HW rail & style of size as per IS: 1003 (Part I), kiln seasoned & chemically pressure treated etc complete all as specified and directed.

Taking down shutters of any description exc 1 sqm and n.exc 2 sqm each all as specified and directed.

Taking down shutters of any description exc 2 sqm each all as specified and directed.

Dismantling structural steel work including doors, gates, railings etc but excluding framed truss etc complete all as specified and directed.

S&F for collapsible steel gates, top hung, consisting for channel pickets, pivoted flat bars, top & bottom runners, brass handles etc., as specified, erected in position & securing runners with holdfasts & brackets, complete

S&F for steel rolling shutters, without ball bearing, as specified including top cover, anchoring rod, hasp & staple & one shop coat of primer; erected in position as indicated, complete; push pull or manual type thickness of laths 1.25 mm etc complete all as specified and directed.

S&F for safety lever locks mild steel with 4 leavers for rolling shutters, complete all as specified and directed.

S&F for ball bearing for rolling shutters, complete all as specified and directed.

S&F for framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 etc complete all as specified and directed.

Dismantling of partition / windows of any size and any description complete all as specified and directed.

M&L for rubber beading for fixing glass panes in aluminium frame work complete all as specified and as directed.

S&F for powder coated aluminium window and ventilator shutters, side hung / sliding type without sash bar, aluminium section weighing not less than 0.55 Kg/ RM including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150 mm long (1 No.), hinges type B-21 100 mm long (2 Nos.), suitable handle (1 No.) complete all as specified and directed.

S&F for anodised aluminum section for making doors, windows(side hung/sliding), partition wall, shutters etc including styles & rails with standard anodized aluminum section, with one or more rebates including aluminium snap beading complete all as specified and directed (Glazing, rubber beading,hinges etc shall be measured and paid separately)

S&F for 5 mm thick sheet glass ordinary quality and glazing with oil putty in square exc 0.50 Sqm in each pane fixed in aluminium frame complete all as specified and directed.

M&L for 9 mm thick prelaminated particle board, interior grade, prelaminated both sides with decorative choice lamination, fixed with screws to timber/ aluminium frame work in cup board shutters / aluminium partions etc..complete all as specified and directed.

S&F in repair Stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm with stainless steel wire staples complete all as specified and directed.

Hacking out old broken glass of any thickness, size, quality or description from metal frame including punching or drilling out old glazing pins/spring clips etc complete all as specified and directed.

S&F for 4 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.50 Sqm in each pane all as specified and directed.

S&F for 4 mm thick sheet glass ordinary quality and glazing with oil putty in square exc 0.50 Sqm in each pane all as specified and directed.

Dismantling of ceiling board /Wall panelling of any thickness and of any description including cover fillets complete all as specifed and directed.

S&F for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed.

S&F for Solid PVC Wall Lining consisting of 5mm thick single side prelam PVC colour sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing, complete all as specified and directed.

M&L for false ceiling at any height using integral densified calcium silicate, reinforced with fibre and natural filler false ceiling tiles of size 595 mm x 595 mm of approved texture, design and patterns having NRC (Noise reduction co-efficient) of minimum 0.5 as per IS 8225 : 1987, Light reflectance of minmum 85%, non-combustible as per BS : 476 (Part - 4), fire performane as per BS : 476 (Part 6 & 7), humidity resistance of 100%, thermal conductivity < 0.05 W/m K as per ASTM 518 : 1991, fixed in true horizontal level, suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33 mm thick (galvanised @ 120 grams per square metre on both sides), comprising of main - T runner of size 24 mm x 38 mm of length 3 m, cross - T of size 24 mm x 32 mm of length 600 mm to form grid module of size 600 mm x 600 mm, Grid suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per square metre) i.e., 50 mm long, 8 mm outer diamter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85 mm x 25 mm x 25 mm x 2 mm. Galvanized iron perimiter wall angle of size 24 mm x 24 mm x 0.4 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm centre to centre, 40 mm long dry wall stainless steel screws complete all as specified and directed including taking down old false ceiling and grid. Note : Ceiling Tile shall be of 15 mm thick densified tegular edged light weight calcium silicate of make Aerolite or techno-commercially equivalent make as specified here-in-after

Dismantling plain corrugated steel sheeting any gauage thick ness including Nainital and similar pattern complete all as specifed and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and as directed.

Demolition of brick work or stone/ boulder masonry, PCC block masonry built in cement mortar including all quoins, pillars etc., separation of serviceable materials from the unserviceable, stacking the serviceable materials within 100 M and disposal of unserviceable materials, debris and rubbish to outside MD land complete all as specified and directed.

M&L for pre-cast cement concrete block masonary 1:3:6 type C-1 (Using 20 mm graded stone agg) with solid block exc 10 cm in width and setting in CM 1:6 etc complete all as specifed and directed.

Taking down cement plaster on brick or stone wall etc incl raking out joints hacking for key scrubbing down with water complete all as specifed and directed.

S&F in repairs for 18 mm thick block board grade 2 quality interior grade, commercial type,in cub board shutters / shelves complete all as specified and directed.

S&F for stainless steel butt hinges medium weight of size 100 mm complete all as specified and directed.

S&F for mild steel butt hinges medium weight of size 100 mm complete all as specified and directed.

S&F for aluminium anodised barrel tower bolts of extruded section, 150 mm long complete all as specified and directed.

S&F for aluminium anodised cast type handles 150mm long complete all as specified and directed.

S&F for aluminium alloy, anodised, sliding door bolt with hasp, staple bolt type and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections 300 mm long complete all as specified and directed.

S&F for door stopper of rubber and stainless steel body, 100 mm size complete all as specified and directed.

S&F in repairs for 7 mm thick aluminium grill of make "Deco grill" and DG - 104 model or any other equivalent approved make fitted in to suitable Aluminium channel and fixed to windows/ ventilators including channel complete all as approved and directed.

M&L for 12 mm thickToughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required ,including one pivot per shutter and one lock per door including all necessary stainless steel fittings and fixture as required complete all as per directed.

S&F in repair for double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty, complete all as specified and directed.

S&F in repairs for Aluminium (Die cast) body door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width & of weight between 61 to 80kg complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth (without using extra cement) etc complete all as specified and directed.

Servicing of collapsible steel gates, greesing, replacement of parts if required like rollers, handles, braces screws including straightening of flats in bent if any and making good for operable and a coat of paint complete all as specified and directed.

Taking down steel rolling shutters of any area and any description including one coat of Synthetic enamel paint, top cover with all parts such as shaft, spring, ball bearing, drum, CI pulley complete from brackets, channel etc greasing and replacing worn out parts as directed by Engineer-in-Charge and re-fixing the same after realigning the shaft/guide channel, welding drum cage, servicing the components for smooth functioning complete all as specified and directed. Note: Parts replaced shall be measured and paid seperately

Supply only Hood cover, complete all as specified and directed.

Supply only safety lever locks mild steel with 4 leavers for rolling shutters, complete all as specified and directed.

Supply only ball bearing, complete all as specified and directed.

Supply only anchoring rod, complete all as specified and directed.

Supply only channels / guide rails, complete all as specified and directed.

Supply only 1.25mm thick laths, complete all as specified and directed.

Servicing of aluminium sliding / Side hung shutters of any type including renewal of worn out parts like rubber beading( of weight min 1 kg per shutter), rollers, handles, hinges, locks, etc including necessary form work if required(upto 6M height) complete all as specified and directed.

Servicing of aluminium sliding / Side hung shutters of any type including renewal of worn out parts like rubber beading( of weight min 1 kg per shutter), rollers, handles, hinges, locks, etc including necessary form work if required (exceeding 6.0 m height) with necessary scaffholding complete all as specified and directed.

Re securing glass of any description in existing metal frames, glazed with putty / beads including removing loose / decayed putty / beads, painting / oiling one coat on rebates, grooves, re puttying and painting / oiling puttied surfaces to match existing work (New length of frame re puttied shall be measured), complete all as specified and directed.

M&L for welding in repairs to steel windows / doors exc 2.5 cm but not exc 5.00 cm in length and thickness of metal to be welded n. exc 6mm complete all as specified and directed.

S&F for Venetian blinds, roll to top, 100 mm wide with polyster fabric of approved colour and pattern with aluminum fittings, and top rail and nylon buttons / loops etc., fixed cuttings and alteration if necessary wherever AC / coolers exists including dismantling of old unserviceable venetian blinds, complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint over a coat of pink primer including preparation of new wooden surfaces exc 10 cm in width or girth complete all as specified and directed.

M&L for cleaning and preparation of old wooden surfaces of any description over 10cm width or girth and applying french polishing including wood filler with one or more coats complete all as specified and directed.

M&L for cleaning and preparation of new wooden surfaces of any description over 10cm width or girth and applying french polishing including wood filler with one or more coats complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint on new or previously untreated steel surfaces exc. 10 cm in width or girth over a coat of red oxide zince chrome primer complete all as specified and directed.

M&L for preparation of old painted steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old painted wooden surfaces of any description, not otherwise, described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of 1mm thick wall care putty complete all as specified and directed.

M&L for preparation of old decorated plastered or unplastered surfaces of walls etc brooming down with steel wire brushing , scrapping down smoke soot , moulds moss and efflorescent salts trading etc & greasy spouts including concrete pilasters etc. and applying one coat of acrylic emulsion distemper on walls complete all as specified and directed.

M&L for preparation of old on brick, stone, concrete, asbestos cement or plaster surface of any description over 10cm girth or width, not otherwise described and applying one coat of Plastic emulsion paint complete all as specified and directed.

Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions , complete all as specified and directed.

M &L for 605 x 605 mm Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flangesof 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre, complete all as specified and directed.

S&F in repairs Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed, complete all as specified and directed.

S&F Counter top washbasin with 32mm grating in any shape and of size 500 x 395 x135mm, complete all as specified and directed.

M&L Granite of 20mm thick, work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and including screed layer of 15 mm thick in CM 1:4 all as specified and as directed.

Please Enable Macros to View BoQ information