GE/ALP (8212B) KOLKATA OF 2023-24

Amount

Demolition of cement concrete of any description and in any position not other wise specifically provided for complete all as specified and directed. (upto any height of of building)

M&L for PCC 1:5:10 type E2 (using 40mm graded crushed stone aggregate) as in filling sunken floor complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4 Type B-1 ( using 20 mm graded crushed stone aggregate) as in sub base of floor complete all as specified and directed.

Supply and applying two coats of high performance elastomeric cementitious waterproof coating sandwiched with 45 GSM glass fibre reinforcement on the entire floor and 1.0 m of all walls of all toilets as per following methodology:- Cleaning of exposed concrete surface by mechanical means or by hydro blasting to remove laitance, loose particles, contamination etc. which may hinder bonding. coving of RCC joints with PCC (1:1.5:3) mixed with Integral Water Proofing compound. Applying one coat of waterproofing membrane to concrete surfaces followed by application of 45GSM glass fibre on the wet surface. Applying second coat of waterproofing membrane at the right angles to the direction of first coat. Second coat shall be applied after the first coat gets dry. Sprinkling fine aggregate immediately after the application of second coat to get the mechanical key for protective plaster. Curing to Water proofing membrane to be carried out for minimum period of 3 days with ponding complete. The Water Proofing Product Should have Mixed density: 1.68g/cc (brushable consistency). Adhesion to concrete : >1N/mm2. Static crack accommodation: 1mm.( Fosroc/Elantas beck/Kunal conchem) (upto 12 storey high building) (Make :- Fosroc/Elantas beck/Kunal conchem)

Supplying and laying for 40 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/walls including all brass fitting/fixtures in any grade to receive plumbing fittings and fixtures complete all as specified and directed

Dismantiling of floor hearth or wall tiling including cement mortar bedding (but not backing), and rubbish off the premises (out of MOD land), complete all as specified and directed.

Material and labour for glazed ceramic tiles of size 450x300x7-8mm thick in verticle surfaces set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles laid over and including 10mm thick cement plaster in cement mortar (1:4) complete all as specified and directed.

Material and labour for non-skid ceramic coloured floor tiles as in floor 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floor etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles laid over and including 15mm thick cement screed bed in CM (1:6) complete all as specified and directed.

Material and labour for non-skid ceramic coloured floor tiles as in floor 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm as in skirting etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles laid over and including 10mm thick cement plaster for backing coat in CM (1:4) complete all as specified and directed.

M&L for double charged vitrified ceramic coloured tiles 8-9mm thick (square /rectangular ) polished area of each tiles not exceeding 0.36 sqm as in floor set and jointed in neat cement slurry and pointed white or coloured cement to match the shade of the tiles laid over and including 10mm thick plaster in CM (1:4) for backing coat complete all as specified and directed .

M&L for double charged vitrified ceramic coloured tiles 8-9mm thick (square /rectangular ) polished area of each tiles not exceeding 0.36 sqm as in skirting etc. set and jointed in neat cement slurry and pointed white or coloured cement to match the shade of the tiles laid over and including 10mm thick cement plaster in CM (1:4) for backing coat complete all as specified and directed .

Dismantling cast iron or re-inforced concrete drain pipes of 100mm bore, jointed in cement mortar complete all as specified and directed.

S&F CI spun pipes with out ears in any length fixed to wall with brackets of 100mm bore including bitummous paints both side complete all as specified and as directed by Engineer-in-charge.

S&F for CI bend with door of 100mm bore complete all as specified and directed.

S&F for CI branch pieces single equal or unequal with door of 100mm bore complete all as specified and directed.

S&F for CI 'T' of 100mm bore complete all as specified and directed.

S&F CI cowl of 100mm bore complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings,heads, shoes, bends, swan-necks,etc., including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories)

S&F for 110mm bore PVC(SWR) pipe single socket in any length rubber ring joints complete all as specified and directed.

S&F for 110mm bore PVC(SWR) pipe bend single socket complete all as specified and directed.

Supply and fixing for 110 mm dia PVC (SWR) junction single, (singleT), equal or unequal fixed to wall upto any height of the building complete all as specified and directed.

S&F for 75mm bore PVC(SWR) pipe single socket in any length rubber ring joints complete all as specified and directed.

S&F for 75 mm bore PVC(SWR) pipe bend single socket complete all as specified and directed.

Supply and fixing for 75 mm dia PVC (SWR) junction single, (single T), equal or unequal fixed to wall upto any height of the building complete all as specified and directed.

Taking down cement plaster including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

Demolition of brickwork quoins,arches,pillars etc but excluding ashlar facings,dressed all store work and precast concrete articles built in cement mortar.

M&L for brick work with sub class 'B' bricks built in cement mortar (1:6) straight or curved on plan exceeding 6 mtr mean radius complete all as specified and directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan or to any radius in half brick work built in CM (1:4) complete all as specified and directed.

M&L for rendering 15mm thick in CM (1:6) on other than fair face of brick work or concrete surfaces and finished the surface even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick, in cement mortatr (1:4), as on brick/concrete surface etc finish even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 10mm thick with CM (1:3) on or concrete surfaces and finished the surface even and smooth as in ceiling complete all as specified and directed.

M&L for preparation of new plastered surface and applying two coats of oil emulsion distemper over a coat of primer complete all as specified and directed.

M&L for preparation on new plastered surfaces of wall and applying two coats of cement base paint over a coat of primer upto four storey high bldg complete all as specified and directed.

M&L for preparation of new plastered surface of ceiling and applying two coats of white wash on new plastered surface etc, complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connections, including cleaning for re-fixing or removal.

Taking up or down 20mm bore steel tubing and connections, including cleaning for re-fixing or removal.

Taking up or down 25mm bore steel tubing and connections, including cleaning for re-fixing or removal.

M&L for cutting chases, pinning, in making good to facing where required of brick wall and pointing in cement motrar 1:3 to ends and cutting chases for concealed water tubing and concealed conduit wiring ete and making good surfaces

S&F for 15mm bore steel tubing "medium grade" galvanised with all fittings fixed complete to wall and ceiling complete all as specified and directed.

S&F for 20mm bore steel tubing "medium grade" galvanised with all fittings fixed complete to wall and ceiling complete all as specified and directed.

S&F for 25mm bore steel tubing "medium grade" galvanised with all fittings fixed complete to wall and ceiling complete all as specified and directed.

Supplying and laying for 20 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/walls including all brass fitting/fixtures in any grade to receive plumbing fittings and fixtures complete all as specified and directed

Supplying and laying for 25 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/walls including all brass fitting/fixtures in any grade to receive plumbing fittings and fixtures complete all as specified and directed

Supplying and laying for 32 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/walls including all brass fitting/fixtures in any grade to receive plumbing fittings and fixtures complete all as specified and directed

S&F in repair 20mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipes complete all as specified and directed.

S&F in repair 25mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipes complete all as specified and directed.

S&F in repair 15mm bore brass CP bibcock fancy type long body with crutch or butterfly handle complete all as specified and directed.

S&F in repair 15mm bore brass CP stopcock concealed type fancy type,with crutch or butterfly handle complete all as specified and directed.

S&F in repair 15mm bore brass CP angular stopcock type with crutch or butterfly handle complete all as specified and as directed .

S&F in repair PVC connection 15 mm size pipe with PTMT nut of Length 600mm complete all as specified and directed.

S&F in repair brass CP shower roses with or without swivel joints,with shower arm, 125mm size, including fixing to steel pipes or union complete all as specified and directed.

S&F in repairs vitreous china wash basin ( white), flat back, size 580 x 450 mm, excluding taps, waste,chain and plug and porcelain stopper but including brackets, complete all as specified and directed.

S&F in repair 15 mm bore fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repair 32mm dia flexible PVC waste pipe for basin etc complete all as specified and directed.

S&F in repair 32 mm bore waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S&F in repair vitreous china squatting pan of "orissa" pattern long pan of size 580 mm x 440mm with integral foot rest white with cast iron p or s trap with back inlet including flush pipe of suitable length to connection with existing cistern & make good complete all as specified and directed.

S&F in repairs 10 litres capacity PVC valveless, syphonic action type, flushing cistern, white colour, low level, white with inlet, ball valve, float and handle including brackets duly painted, 32mm dia PVC flush pipe complete all as specified and directed.

S&F in repair CI Nahani trap of 100mm dia, including jointing to waste pipe fixed in cement concrete, (1:2:4) type B1 ( using 20 mm graded crushed stone aggregate) complete all as specified and directed.

S&F in repairs CP grating of 100mm dia, fixed with cement mortar (1:3).complete all as specified and directed.

Supply & fixing as in replacement wash down water closet (pedestal pattern) including connection to drain (or outgoing pipe) and to flush pipe etc. and making good the damaged surfaces complete all as specified and directed.

S&F in repair PVC white water closet seat cover heavy duty coloured closed pattern with flat bottom and cover and mild steel CP hinnging device complete.

S&F in repair CP hand shower (faucet) with one meter flexible tube with wall hook complete.

S&F in repair wall mixture non telephonic brass CP tap for mixing hot and cold water including three joints to 15 mm bore pipes or union and pluging and screwing to wall complete.

S&F in repair wash hand basin mixture Brass CP tap for mixing hot and cold water including three joints to 15 mm bore pipes or union and pluging and screwing to wall complete.

S&F in repair 15mm bore brass spindle pluging and screwing to fittings complete.

S&F in repair CP knob head pluging and screwing to fittings complete.

S&F in repair 15mm bore GI short piece pluging and screwing to fittings complete.

S&F in repair 20mm bore GI short piece pluging and screwing to fittings complete.

S&F in repair ball valve including nessesary fittings fixed to existing flushing cistern complete all as specified and as directed.

S&F in repairs towel rail of brass chromium plated tube 19 to 20 mm dia and 600 mm long `D' type complete with brass chromium plated screw complete all as specified and directed.

S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed Make Prayag or equivalent as approved by the GE.

S&F in repair corner glass shelf assembly consisting of 5.5mm thick sheet glass shelf with chromium plated bracket guard and railing complete all as specified and directed Make Prayag or equivalent as approved by the GE.

S&F in repair brass CP toilet paper holder to wall with chromium plated brass screws complete all as specified and directed.

S&F in repairs 1mm thick of stainless steel kitchen plate rack of size 750mm x 900mm including all fixing arrangement complete all as specified and directed.

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm and bowl size 410mm x 330mm x 160mm including 32mm dia waste coupling of PTMT (half or full threaded) Minimum weight 32mm-45gms/40mm-60 gms).

Material and labour for 16-18mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. complete all as specified and directed.

Supply and fixing in repair powder coated aluminum window/ventilator (single leaf single shutter) side hung type with stainless steel butt hinges, one shutter glazed with and including 4.00mm thick plain sheet glass and other shutter with stainless steel wire cloth of 0.36 mm dia of wire and average width of aperture 1.40mm fixed with stainless steel wire staples, rubber gasket, stopper , aluminium grills of 70mm aperture, aluminium anodised handle 100mm long ,aluminium anodised tower bolts 100mm long and peg stay etc, size of aluminum frame shall be 100mmx50mmx1.55mm and shutter frame shall be 40mmx20mmx1.55mm after and including dismantling of old aluminium ventilator complete all as specified and directed. upto 12 storied bldg Note : 1 No Glazed shutter 1 No Gauged shutter and aluminium grill shall constitube one unit.

S&F for powder coated aluminium sliding windows for three track with rubber gasket, stopper powder coated aluminium standard beads/glazing clips ,locking arrangement etc and aluminium frame of size 80mmX25mmX1.55mm and shutter of section 20mm X20mm X1.55mm including ( two shutter of 4.8mm thick glass and one shutter of wiremesh 0.36 mm dia of wire and average width of aperture 1.40 mm) including with necessary all fittings and including taking down of old steel windows etc complete all as specified and directed.

Taking down chowkhat or frames with shutter not exc. 1.5 Sqm each (without taking of shutters from the frames) complete all as specified and directed. (upto 12 storied bldg.)

S&F for magic eyes for wooden door including all fitting all as specified and as directed.

S&F for solid PVC door frame of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube in opening all as shown on drawing (upto 12 storied bldg.)

S&F factory made solid panel PVC door shutter 30 mm thick style consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheets strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail and bottom rail on either side and as gap inside for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in the MS frame welded/seated to the stiles and rail with suitable PVC sheet bending and jointed together with solvent cement supplying and fixing in the frame at site as per specification and drawing. (upto 12 storied bldg.)

Supply and fixing for 100mm size stainless steel butt hinges medium weight, cold rolled complete all as specified and directed.

Supply and fixing for 150mm long aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F for 100mm long aluminium,anodised extruded handle fabricated type, complete all as specified and as directed.

Supply and fixing in repair for 18/19mm thick prelaminated particle board interior grade, prelaminated one side with decorative choice laminations and other side balancing white lamination fixed with screws to timber frame work as in kitchen cabinet shutter including external teak wood lipping 6mm thick fixed with nails (upto 12 storied bldg) complete all as specified and directed.

Supply and fixing in repair for 18/19mm thick block boards, grade 2 quality,interior grade, decorative type with decorative face veneer on both face fixed with screws to timber frame work as in cupboard shutter including external teak wood lipping 6mm thick fixed with nails complete all as specified and directed.

Supply and fixing in repair for 0.9mm thickess of decorative laminated type 1 of surfaces finish,colour and pattern as approved fixed with approved adhesive as per manufacture,s instruction complete all as specified and directed.

Supply and fixing for 30mm width of flap continious piano hinges mild steel,bright finish or electro galvanised complete all as specified and directed.

S&F in magnetic catches 50 mm long of any description

Supply and fixing for 40mm dia cupboard knobs of brass fixed with nut, screw and washer complete all as specified and directed.

Supply and fixing for 75mm hasp and staple, safety type brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F in repair 6mm thick plywood in cupboards complete all as specified and directed. (upto 12 storied bldg.)

S&F in repair for 2nd class hard wood plain fillet of size exc 13 & n.exc 25 Sq cm, rectangular or square in section, clean sawn, secured with nails or beads complete all as specified and directed. (upto 12 storied bldg.)

Supply and fix in repairs 0.56 mm thick plain,aluminium sheeting, Alloy 31000 H4 drip and straight flashing complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light,fan,socket etc.) complete including fittings such as switch, ceiling rose, light fittings, regulators etc. and making good to the disturbed surface of walls, floors etc. complete all as specified and directed.

M&L for point wiring for one light/ bell/ fan controlled by one number one way switch complete with 1100 V grade FRLSH PVC insulated multistranded copper conductor cable conforming to IS : 694 of size 1.5 Sqmm two runs single core for phase and neutral drawn through and including PVC concealed conduit pipe of suitable size minimum 20mm dia medium grade (ISI Marked) complete with one run of 1100 V grade FRLSH PVC insulated multistranded copper conductor cable 1.5 Sq mm single core green colour for earth continuity conductor and connecting to common earth dolly incl provn of MS sheet pressed sunken box not less than 1.12 mm thick concealed on wall, with 3 mm thick laminated sheet top cover ISI marked (Make: Hylum/Anchor/Orient) for fixing of switches/socket/regulator with screws complete including making good of disturbed surfaces of wall/ceiling/floor in same specification as per existing surrounding surface complete all as specified and directed. Note : Proper colour code of wiring to be maintained.

All as per item No. 98 above but for 5 Amps Socket on same board complete all as specified and directed.

All as per item No. 98 above but for 05 Amps socket on independent board complete all as specified and directed.

All as per item No. 98 above but for 15 Amps independent socket with 2.5 sqmm copper conductor complete all as specified and directed.

All as per item No. 98 above but for one light/fan/bell in PVC casing caping complete all as specified and directed.

All as per item No. 98 above but for 5 Amps Socket on same board in PVC casing caping complete all as specified and directed.

All as per item No. 98 above but for 5 Amps Socket on independent board in PVC casing caping complete all as specified and directed.

All as per item No. 98 above but for 15 A independent socket with 2.5 sqmm copper conductor in PVC casing caping complete all as specified and directed.

M&L for point wiring for one light/ bell/ fan controlled by one number one way switch for 5Amps SSC complete with 1100V grade FRLSH PVC insulated unsheathed multistranded copper conductor cable conforming to IS : 694 of size 1.5 Sqmm two runs single core for phase and neutral drawn through in and including PVC concealed conduit of suitable size (minimum 20mm dia medium grade ISI Marked) complete with one run of 1100V grade FRLSH PVC insulated multistranded copper conductor cable 1.5 Sq mm single core green colour for earth continuity conductor and connecting to common earth dolly including provn of modular type galvanized MS sheet pressed sunken box not less than 1.00 mm thick concealed on wall including fixing of modular cover plate of suitable modules with fixing screws, for fixing of modular type switches / socket/ Fan regulator etc. complete including making good of disturbed surfaces of wall/ceiling/floor in same specification as per existing surrounding surface complete all as specified and directed. Note : Proper colour code of wiring to be maintained.

All as per item No. 106 above but for 5 Amps socket on same board complete all as specified and directed.

All as per item No. 106 above but for 5 A socket point on independent board complete all as specified and directed.

All as per item No. 106 above but for 15 Amps socket point independent with 2.5 sqmm 1100V grade FRLSH PVC insulated copper conductor complete all as specified and directed.

All as per item No. 106 above but for one light/fan/bell in existing steel / PVC concealed Conduit complete all as specified and directed.

All as per item No. 106 above but for 5 Amps Socket on same board but drawn in existing steel / PVC concealed Conduit complete all as specified and directed.

All as per item No. 106 above but for 5 Amps Socket on independent board but drawn in existing steel / PVC concealed Conduit complete all as specified and directed.

All as per item No. 106 above but for 15 Amps socket point with 2.5 sqmm PVC insulated copper conductor in existing steel / PVC concealed Conduit complete all as specified and directed.

M&L for replacement of point wiring for one light controlled by two number two way switch complete with 1100 V grade FRLSH PVC insulated unsheathed multistranded single core copper conductor cable conforming to IS : 694 of size 1.5 Sqmm with two runs for phase and neutral drawn through and including PVC concealed conduit pipe of suitable size minimum 20mm dia medium grade (ISI Marked) complete with one run of 1100 V grade FRLSH PVC insulated multistranded copper conductor cable 1.5 Sq mm single core green colour for earth continuity conductor and connecting to common earth dolly including provn of MS sheet pressed sunken box not less than 1.12 mm thick concealed on wall, with 3 mm thick laminated sheet top cover ISI marked (Make: Hylam/Anchor/Orient) for fixing of switches/socket/regulator with screws complete including making good of disturbed surfaces of wall/ceiling/floor in same specification as per existing surrounding surface complete all as specified and directed. Note : Proper colour code of wiring to be maintained.

M&L for replacement of point wiring for one light controlled by two number two way switch complete with 1100 V grade PVC insulated unsheathed multistranded single core copper conductor cable conforming to IS : 694 of size 1.5 Sqmm with two runs for phase and neutral drawn through in and including PVC casing caping of suitable size minimum 20 mm dia medium grade ISI Marked complete with one run of 1100 V grade PVC insulated copper conductor cable 1.5 Sq mm single core green colour for earth continuity conductor and connecting to common earth dolly including colour coding of cable shall be for phase, neutral and earth wire as specified in MES SSR Part I 1991 with provn of sunken MS sheet pressed terminal boxes made of 1.12mm thick M.S. Sheet, prepainted concealed on wall, with 3 mm thick laminated sheet top cover (ISI marked) (Make: Hylam/Anchor/Oreint) for fixing of switches/socket/regulator with screws complete all as specified and directed.

Dismantling and taking down carefully sub-main wiring any size including wooden batten etc and making good the disturbed surfaces of wall/ floor to match the existing wall/ floor etc complete all as specified & directed.

Material and labour for circuit/sub-main wiring (surface type) with two runs of 1100 V grade PVC insulated & unsheathed 2.5 Sqmm single core multi stranded copper conductor cable alongwith one run of 2.5 Sqmm 1100 V grade FRLSH PVC insulated & unsheathed single core multi stranded copper conductor cable for earth continuity conductor connected to common earth dolly, drawn through PVC casing caping complete all as specified and directed. Note : (i) Three runs of 2.5 Sqmm cable and one run PVC casing caping shall measured as one length.

Material and labour for circuit/sub-main wiring (surface type) with two runs of 1100 V grade PVC insulated & unsheathed 4.0 Sqmm single core multi stranded copper conductor cable alongwith one run of 4.0 Sqmm 1100 V grade FRLSH PVC insulated & unsheathed single core multi stranded copper conductor cable for earth continuity conductor connected to common earth dolly, drawn through PVC casing caping complete all as specified and directed. Note : (i) Three runs of 4.0 Sqmm cable and one run PVC casing caping shall measured as one length.

Material and labour for of sub-main wiring with two runs of 1100 V grade FRLSH PVC insulated & unsheathed 6.0 Sqmm single core multi stranded copper conductor cable alongwith one run of 6.0 Sqmm 1100 V grade PVC insulated & unsheathed single core multi stranded copper conductor cable for earth continuity conductor connected to common earth dolly, drawn through existing concealed steel conduit or PVC conduit complete all as specified and directed. Note : (i) Three runs of 6.0 Sqmm cable and one run steel conduit shall be measured as one length.

Supply and fix for MS box made of 1.12 mm thick MS sheet painted with synthetic enamel paint on all sides after dismantling old one including making good the disturbed surfaces complete all as specified and directed of the following sizes :-

(a) Size 25cm x 20 cm x 6 cm

(b) Size 15cm x 10cm x 6 cm

(c) Size 10cm x 10cm x 4 cm

(d) Size 20cm x 15cm x 4 cm

S & F for ceiling rose, 3 terminal, PVC/ polycarbonate isolated body, 230 V.

S & F for Piano switch flush type single pole one way 5 Amps, 230 V.

S & F for Piano switch flush type single pole two way 5 Amps, 230 V.

S & F for Socket flush type, 2 in 1 multipurpose, 6 Pin, 5 Amps and 15 Amps

S & F for Socket flush type 2 in 1, 5 Pin, 5 Amp. .

S & F for Switch piano flush type, single pole one way 15 Amps, 230 V.

S & F for Call bell musical door chrome AC 230 volts single pole (Ding dong Type)

S & F for Batten holder PVC / Poly carbonate with back plate suitable for 230V AC

S & F for Electronic Ceiling fan regulator (2 Module stepped type) flush type suitable for 230 V AC.

S & F for Modular type switch, one way 6 Amps , 1 module complete Make:-Legrand/Anchor(Roma)/Crabtree

S & F for modular type socket 5 pin, 6 Amps 2 module complete all as specified and directed. Make:-Legrand/Anchor(Roma)/Crabtree

S & F for Modular type socket 5 pin, 16 Amps 2 module complete all as specified and directed. Make:-Legrand/Anchor(Roma)/Crabtree

S & F for Modular type switch, one way 16 Amps, 1 module complete all as specified and directed. Make:-Legrand/Anchor(Roma)/Crabtree

S & F for Modular type fan regulator step type(2 module)120 Watt. complete all as specified and directed. Make:-Legrand/Anchor(Roma)/Crabtree

S & F for Modular type 5 Aamp bell push switch. complete all as specified and directed.Legrand/Havells/Crabtree/Anchor

M&L for modular cloured/white cover plate with frame 2 module including taking down of old one complete all as specified and directed. Make:-Legrand/Anchor(Roma)/Crabtree

M&L for modular coloured/white cover plate with frame 3 module including taking down of old one complete all as specified and directed.Make:-Legrand/Anchor(Roma)/Crabtree

M&L for modular coloured/white cover plate with frame 4 module including taking down of old one complete all as specified and directed. Make:-Legrand/Anchor(Roma)/Crabtree

M&L modular coloured/white cover plate with frame 6 module including taking down of old one complete all as specified and directed. Make:-Legrand/Anchor(Roma)/Crabtree

M&L for modular white coloured/cover plate with frame 8 module including taking down of old one complete all as specified and directed. Make:-Legrand/Anchor(Roma)/Crabtree

M&L modular white coloured/cover plate with frame 12 module including taking down of old one complete all as specified and directed. Make:-Legrand/Anchor(Roma)/Crabtree

M&L for modular white coloured/cover plate with frame 16module including taking down of old one complete all as specified and directed. Make:-Legrand/Anchor(Roma)/Crabtree

M&L for modular metal flush box 1 / 2 module including taking down of old one complete all as specified and directed. Make:-Legrand/Anchor(Roma)/Crabtree

M&L for modular metal flush box 3 module including taking down of old one complete all as specified and directed. Make:-Legrand/Anchor(Roma)/Crabtree

M&L for modular metal flush box 4 module including taking down of old onecomplete all as specified and directed. Make:-Legrand/Anchor(Roma)/Crabtree

M&L for modular metal flush box 6 module including taking down of old onecomplete all as specified and directed. Make:-Legrand/Havells/Crabtree/Anchor

S & F for modular Metal flush box 8 module complete all as specified and directed. Make:-Legrand/Anchor(Roma)/Crabtree

S & F for modular Metal flush box 12 module complete all as specified and directed. Make:-Legrand /Anchor(Roma) /Crabtree

S & F for modular Metal flush box 16 module complete all as specified and directed. Make:-Legrand /Anchor(Roma)/ Crabtree

Supply and fix for 3mm thick industrial plastic laminated sheet duly cut for fixing piano type switch,socket, regulator of the following size complete all as specified and directed. (Make : Hylam/Anchor/Orient)

Supply and fixing for MCB 06 Amps to 32 Amps, single pole, 240 Volt "C" series, breaking capacity 10 KA complete all as specified and directed. (Make : ABB /Legrand/ Havells/L&T/Schineider.)

Supply and fixing for MCB 40 Amps to 63 Amps, single pole, 240 Volt "C" series, breaking capacity 10 KA complete all as specified and directed. (Make : ABB /Legrand/ Havells/L&T/Schineider.)

Supply and fixing for MCB 06 Amps to 32 Amps, SPN, 240 Volt "C" series, breaking capacity 10 KA complete all as specified and directed. (Make : C&S /Legrand/ Havells/L&T.)

Supply and fixing for MCB 40 Amps to 63 Amps, SPN, 240 Volt "C" series, breaking capacity 10 KA complete all as specified and directed. (Make : ABB /Legrand/ Havells/L&T/Schineider.)

Supply and fix for SPN MCB DB 8 way with Amps rated copper bus bar, neutral link, suitable for mounting MCB's 240 volts double door type including taking down old one and making good the disturbed surface complete all as specified and directed. (Make : ABB /Legrand/ Havells/L&T/Schineider.)

Supply and fixing for AC power supply unit 6 module consisting of in built modular motor starter, plug top, 20 Amp Socket and box duly fixed/grouted on wall complete all as specified and directed. (Make : North West/Havells/Crabtree/Anchor)

S & F modular type 32 A Motor starters (for AC) white colour, (Make : crabtree/Havells/Legrand/North west/ Anchor (ROMA)

S&F for LED tube light fitting 4 ft 20 watt, 230 volt energy efficient comprises of extruded PVC housing, with inbuilt driver and PC diffuser including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.all as specified and directed. Make: Magik (CAT No- BWUA020C1293) or equivalent in makes Crompton/Bajaj

All as per item No 158 above but LED tube light of 2 ft and 1 x 10 Watt LED lamp complete all as specified and directed. Make : Crompton/ Havells/ Philips/ Bajaj.

S & F for LED mirror light fitting with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with inbuilt driver and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. Make- Magik (Cat No- BWMP010C)/ Crompton (Cat No- CCS-103-10-65-SL-DP-NWH)/Havells(Cat No- LUMILINE BS10WLED865SPCWH)

Tirupati Buildcon Pvt. Ltd.

GAYATRI ENTERPRISE

M/S AVIJEET INTERNATIONAL

M. M. C. AND CO