REPAIR, POLISHING AND PAINTING TO FURNITURE AND CONVERSION OF GI PIPE NEWAR TO CHARPOY GI PIPE PLYTOP FOR RANGIA, TAMULPUR, DARRANGA AND HATTIGOR MILITARY STATION UNDER GE RANGIA

Amount

M & L for taking down old unserviceable front legs of size 460x 55X30mm (as per drg No. FD-279) of chair dining and supply & fixing of new one as specified in drg made out of teak wood, duly seasoned, free of knots. The new parts shall be french polished to be matched with the original polish shade after making the surface smooth with putty/sand paper complete all as specified and as directed by Engineer-in-charge.

All as per serial item No. 01 above but for Rear legs of size 890x55x30mm.

All as per serial item No. 01 above but for Side rails of size 420x30x65mm.

All as per serial item No. 01 above but for Back rails of size 395x30x65mm.

All as per serial item No. 01 above but for Front rails of size 430x30x65mm.

All as per serial item No. 01 above but for Back rest of size 440x45x15 mm.

All as per serial item No. 01 above but for Bottom side stiffeners of size 420x20x25 mm.

All as per serial item No. 01 above but for Bottom middle stiffeners of size 405x20x25 mm.

M&L for taking down old unserviceable front legs (as per drg No. FD-280) of chair writting and supply & fixing of new one as specified in drg made out of teak wood, duly seasoned, free of knots. The new parts shall be French polished & to be matched with the original polish shade after making the surface smooth with putty/sand paper complete all as specified and as directed by Engineer-in-charge.

All as per serial item No. 09 above but for rear legs of chair writing.

All as per serial item No. 09 above but for side rails of chair writing.

All as per serial item No. 09 above but for back rest of chair writing.

All as per serial item No. 09 above but for bottom stiffeners of chair writing.

All as per serial item No. 09 above but for back rails of chair writing.

All as per serial item No. 09 above but for front rails of chair writing.

All as per serial item No. 09 above but for bottom middle stiffeners of chair writing.

All as per serial item No. 09 above but for arms of chair writing.

M&L for taking down old unserviceable front legs (as per drg No. FD-229) of chair easy and supply & fixing of new one as specified in drg made out of teak wood, duly seasoned, free of knots. The new parts shall be french polished & to be matched with the original polish shade after making the surface smooth with putty/sand paper complete all as specified and as directed by Engineer-in-charge.

All as per serial item No. 18 above but for rear legs of chair easy.

All as per serial item No. 18 above but for side rails of chair easy.

All as per serial item No. 18 above but for front rails of chair easy.

All as per serial item No. 18 above but for back rails of chair easy.

All as per serial item No. 18 above but for stiffeners of chair easy.

All as per serial item No. 18 above but for arms of chair easy.

M&L for taking down old unserviceable front legs (as per drg No. FD-357) of chair dining long back and supply & fixing of new one as specified in drg made out of teak wood, duly seasoned, free of knots. The new parts will be french polished and to be matched with the original polish shade after making the surface smooth with putty/sand paper complete all as specified and as directed by Engineer-in-charge.

All as per serial item No. 25 above but for rear legs of chair dining long back.

All as per serial item No. 25 above but for side rails of chair dining long back.

All as per serial item No. 25 above but for front rails of chair dining long back.

All as per serial item No. 25 above but for back rest with cushion of chair dining long back.

All as per serial item No. 25 above but for stiffeners of chair dining long back.

All as per serial item No. 25 above but for seat with cushion of chair dining long back.

M&L for taking down old unserviceable leg of size 100mm x 100mm in section at top and 75mm x 75mm in section at bottom x 405mm high from Trestle Store Room Wooden as per drawing No. FD-86 and supply & fixing new one as specified in drawing made out of teak wood, duly seasoned and free of knots. The new parts shall be french polished and to be matched with the original polish shade after making the surface smooth with putty/sand paper complete all as specified and as directed by Engineer-in-charge.

All as per serial item No. 32 above but for top rails of size 100mm x 100mm x 2440mm in section.

All as per serial item No. 32 above but for cross stiffeners of size 660mm centre to centre.

All as per serial item No. 32 above but for long stiffeners of size 2440mm x 60mm x 100mm in section.

M&L for preparation of surfaces of Trestle Store Room Wooden & applying two coats of creosote oil including cleaning complete all as specified and as directed by Engineer-in-charge.

S&F Top of table dining for six persons as per drawing No. FD-273 of size 1500mm x 900mm x 19mm thick plywood 18mm with 1.5mm thick plastic laminated sheet, laminated sheet fixed over it with fevicol 4mm thick teak wood edging provided all around the top after taking out the old unserviceable one complete all as specified and as directed by Engineer-in-charge.

M & L for taking down old unserviceable Legs 60mm x 60mm in section at top and 40mm dia at bottom from Table dining 6 person as per drawing No. FD-273 and supply & fixing new one as specified in drg made out of teak wood, duly seasoned and free of knots. The new parts shall be french polished and matched with the original polish shade after making the surface smooth with putty/sand paper complete all as specified and as directed by Engineer-in-charge.

All as per serial item No. 38 above but for Top rails long size 25mm x 100mm x 1500mm.

All as per serial item No. 38 above but for Top rail short size 25mm x 100mm x 900mm.

S&F Top of table dining for eight person as per drawing No. FD-273 of size 1800mm x 900mm x 19mm thick ply wood 18mm with 1.5mm thick plastic laminated sheet, laminated sheet fixed over it with fevicol 4mm thick teak wood edging provided all around the top after taking out the old unserviceable one complete all as specified and as directed by Engineer-in-charge.

M & L for taking down old unserviceable Legs 60mm x 60mm in section at top and 40mm dia at bottom from Table dining 8 person as per drawing No. FD-273 and supply and fixing new one as specified in drg made out of teak wood duly seasoned and free of knots. The new parts will be French polished and matched with the original polish shade after making the surface smooth with putty/sand paper complete all as specified and as directed by Engineer-in-charge.

All as per serial item No. 42 above but for Top rails long size 25mm x 100mm x 1800mm

All as per serial item No. 42 above but for Top rail short size 25mm x 100mm x 900mm

S&F Top of table writing made out of 18mm thick veneered pre-laminated particle board confirming to IS- 12823-1990 and 4mm thick Teak wood edging all round size 1145mm x 600mmx19mm as per drawing No. FD-33, 275 after taking out the old unserviceable one complete all as specified and as directed by Engineer-in-charge.

M & L for taking down old unserviceable Legs of size 45mm x 45mm x 145mm from Table writting and supply and fixing new one as specified in drg made out of teak wood duly seasoned and free of knots as per drawing No. FD-33, 275. The new parts will be French polished and matched with the original polish shade after making the surface smooth with putty/sand paper complete all as specified and as directed by Engineer-in-charge.

All as per serial item No. 46 above but for Legs 45mm x 45mm x 744mm.

All as per serial item No. 46 above but for drawers.

All as per serial item No. 46 above but for butt hinges 50mm.

All as per serial item No. 46 above but for knobs 40mm x 40mm.

S&F Plank 25mm thick x 1525mm x 255mm wide with GI bolts qty as per drawing each 3mm dia with nuts to form with out back as per drawing No. FD-77 after taking out the old unserviceable one complete all as specified and as directed by Engineer-in-charge.

All as per serial item No. 51 above but for PVC shoes for legs.

S&F Wooden seat of size 25mm thick x 1800mm x 255mm wide with 3mm dia GI bolts and nuts as per drawing No. FD-78 to form with back after taking out the old unserviceable one complete all as specified and as directed by Engineer-in-charge.

All as per serial item No. 53 above but for back rest of wood size 1800mm x 150mm wide x 19mm thick with GI bolts, nuts and washers.

All as per serial item No. 53 above but for rubber shoes for legs.

S&F Top of Teapoy of size 600mm x 450mm x 18mm made of particle board as per drawing No. FD-278 after taking out the old unserviceable one complete all as specified and as directed by Engineer-in-charge.

S&F Top of Table office clark wooden of size 1525mm x 915mm made of 19mm thick prelaminated particle board per drawing No. DB-4120 after taking out the old unserviceable one complete all as specified and as directed by Engineer-in-charge.

All as per serial item No. 57 above but for drawers of size 260mm x 380mm x 150mm of 20mm thick teak wood.

All as per serial item No. 57 above but for Knobs 40 x 40 mm.

S&F in replacement of 100mm thick cushion of cool foam of 32 density covered with best quality tapertry cloth duly stiched and cushion cover made out of best quality cloth range Rs 120/- to 145/- per mtr one side zip as approved, size 530mm x 500mm for sofa set of five, three, two and single seater complete as per drawing No. FD-281 complete all as specified and as directed by Engineer-in-charge. Make : Kurl-on/Sleepwell/reliance

S&F plywood commercial 1830mm x 920mm x 12mm on bed ply top as per drawing No. FD-246 after taking out the old unserviceable one complete all as specified and as directed by Engineer-in-charge.

All as per serial item No. 61 above but for head board panel

All as per serial item No. 61 above but for foot board panel

All as per serial item No. 61 above but for legs of bed both side

All as per serial item No. 61 above but for long rail

All as per serial item No. 61 above but for stiffener

All as per serial item No. 61 above but for 'L' Shape MS flat of size 5mm thick and 200mm long 25mm width with 6 Nos hole for screw on both side along with 50mm long wood screws.

S&F Mirror 5.5 mm thick380mmx760mm with teak wood frame size to table dressing gents as per drawing No. FD-230 after taking out the old unserviceable one complete all as specified and as directed by Engineer-in-charge. Make:- Saint Gobain / Modiguard / Asahi India Glass Limited.

All as per serial item No. 68 above but for top made out of 12mm thick pre-laminated particle board ext Gde.

All as per serial item No. 68 above but for back made out of 6mm thick plywood commercial SWR with kew plates.

All as per serial item No. 68 above but for drawers.

S&F in repair wooden planks of size 1800mm x 200mm x 20mm thick teak wood as in rack wooden as per drawing No. FD-78 of size 6' x 2' x 6' complete all as specified and as directed by Engineer-in-charge.

S&F in repair wooden scantling of size 1800mm x 75 mm x 75 mm thick teak wood as in rack wooden as per drawing No. FD-78 of size 6' x 2' x 6' complete all as specified and as directed by Engineer-in-charge.

S&F Top of Table computer (3' x 2' x 4') of size 1145 mm x 600 mm made of 18 mm thick prelaminated particle board conforming to IS 12823-1990 and 4 mm thick teak wood edging all round after taking out old unserviceable one complete all as specified and as directed by Engineer-in-charge.

All as per serial item No. 74 above but for drawers

All as per serial item No. 74 above but for butt hinges of size 50mm

All as per serial item No. 74 above but for knobs of size 40mm x 40mm

S&F Top of Table office officer wooden of size 1900 mm x 915 mm made of 19 mm thick prelaminated particle board after taking out old unserviceable one as per drawing no. WDF-32 complete all as specified and as directed by Engineer-in-charge.

All as per serial item No. 78 above but for drawer of size 340 mm x 140 mm x 360 mm teak wood.

All as per serial item No. 78 above but for knobs 40mm x 40mm

M&L for two coats of French polish to old polished wooden furniture including cleaning and preparation of old surfaces of book shelf open large as per drawing No. DB-4121 complete all as specified and as shown on drawings and as directed by Engineer-in-charge.

All as per serial item No. 81 above but for bed plywood top as per drawing No. FD-246.

All as per serial item No. 81 above but for chair writing as per drawing No. FD-280.

All as per serial item No. 81 above but for chair easy as per drawing No. FD-229.

All as per serial item No. 81 above but for chair dining as per drawing No. FD-279.

All as per serial item No. 81 above but for rack wooden of size 6’ x 2’ x 6’ as per drawing No. FD-78.

All as per serial item No. 81 above but for sofa set 5 seater as per drawing No. FD-281.

All as per serial item No. 81 above but for form without back as per drawing No. FD-78.

All as per serial item No. 81 above but for table dressing gents with mirror as per drawing No. FD-230.

All as per serial item No. 81 above but for table office officer as per drawing No. WDF-32.

All as per serial item No. 81 above but for table office clerk as per drawing No. DB-4120.

All as per serial item No. 81 above but for table writing as per drawing No. FD-275.

All as per serial item No. 81 above but for Table dining 6/8 persons/JCOs as per drawing No. FD-239.

All as per serial item No. 81 above but for teapoy wooden as per drawing No. FD-278.

All as per serial item No. 81 above but for chair dining with long back as per drawing No. FD-357.

All as per serial item No. 81 above but for peg table as per drawing No. FD-277.

All as per serial item No. 81 above but for Almirah Medium wooden as per drawing No. FD-93(M).

All as per serial item No. 81 above but for dressing chest with mirror as per drawing No. WDF-24.

M&L for preparation of old painted surface almirah large steel as per drawing No. FD-339 with shelves and applying two coats of synthetic enamel paint by spray machine (bush green & white) colour to the outside surface and internal surfaces complete all as specified and as shown on drawings and as directed by Engineer-in-charge.

All as per serial item No. 99 above but for Almirah large steel ½ H x ½ S as per drawing No. FD-1033.

All as per serial item No. 99 above but for Almirah medium steel steel ½ H x ½ S as per drawing No. FD-114.

All as per serial item No. 99 above but for Almirah medium steel with shelves as per drawing No. FD-243.

All as per serial item No. 99 above but for Book shelf open large steel as per drawing No. FD-69 M.

All as per serial item No. 99 above but for Stool steel 1'-6" h as per drawing No. FD-81 M.

All as per serial item No. 99 above but for Rack 6 tier steel as per drawing No. FD-1038.

All as per serial item No. 99 above but for Table office clk steel as per drawing No. FD-1004.

All as per serial item No. 99 above but for Rack side with tray steel as per drawing No. FD-1023.

All as per serial item No. 99 above but for Charpoy MS tubing with ply top as per drawing No. CWE/Tez/04.

All as per serial item No. 99 above but for Locker steel 3 unit as per drawing No. FD-127 M.

All as per serial item No. 99 above but for Locker bed side steel as per drawing No. FD-257.

All as per serial item No. 99 above but for Table 900X600 steel without drawer as per drawing No. FD-1007.

All as per serial item No. 99 above but for Chair verandah as per drawing No. FD-259.

All as per serial item No. 99 above but for Table office officer steel as per drawing No. FD-84.

All as per serial item No. 99 above but for Trestle store room steel as per drawing No. FD-1043.

All as per serial item No. 99 above but for FMN Set for Charpoy GI Pipe as per drawing No. FD-220.

All as per serial item No. 99 above but for chair CB steel W/O arm as per drawing No. FD-75.

All as per serial item No. 99 above but for Form with out back as per drawing No. FD-1027.

All as per serial item No. 99 above but for Form with back as per drawing No. FD-78.

All as per serial item No. 99 above but for chair tublar steel with arm as per drawing No. FD-75(M).

All as per serial item No. 99 above but for table steel 900 x 900 x 760 mm as per drawing No. FD-1009.

S&F Almerah brass lock 4 lever 40mm CP with duplicate keys for Almerah large steel with shelves as per drawing No. FD-339 after taking out old one carefully and fixing at original positing including necessary assembling as required complete all as specified and as shown on drawings and as directed by Engineer-in-charge.

All as per serial item No. 121 above but for three way locking device.

All as per serial item No. 121 above but for CP locking handle 125 mm for Almerah.

All as per serial item No. 121 above but for shelves for almirah.

All as per serial item No. 121 above but for bottom legs.

S&F Almerah brass lock 4 lever 40mm CP with duplicate keys for Almerah medium steel with shelves as per drawing No. FD-243 after taking out old one carefully and fixing at original position including necessary assembling as required complete all as specified and as shown on drawings and as directed by Engineer-in-charge.

All as per serial item No. 126 above but for Three way locking device.

All as per serial item No. 126 above but for CP locking handles 125mm for almerah.

All as per serial item No. 126 above but for bottom leg.

All as per serial item No. 126 above but shelves for almerah.

S&F CP handles for locker bed side steel with shelves as per drawing No. FD-257 after taking out old one carefully and fixing at original position including necessary assembling as required complete all as specified and as shown on drawings and as directed by Engineer-in-charge.

All as per serial item No. 131 above but for base / top plate plate made out of 1 mm PGI sheet to be fixed by welding.

All as per serial item No. 131 above but for foot rest made out of 1 mm PGI sheet to be fixed by welding.

All as per serial item No. 131 above but for CP hasp and staple as per drawing.

All as per serial item No. 131 above but for door made out of 1 mm PGI sheet to be fixed by hinges.

All as per serial item No. 131 above but shelves for locker.

S&F brass lock 4 lever 40mm CP with duplicate keys for locker steel 3 unit as per drawing No. FD-127(M) after taking out old one carefully and fixing at original position including necessary assembling as required complete all as specified and as shown on drawings and as directed by Engineer-in-charge.

All as per serial item No. 137 above but for CP locking handles.

All as per serial item No. 137 above but for door made out of 1 mm MS sheet to be fixed by hinges.

All as per serial item No. 137 above but for base / top plate plate made out of 1 mm MS sheet to be fixed by welding.

All as per serial item No. 137 above but for foot rest made out of 1 mm MS sheet to be fixed by welding.

S&F rack corner angle of size 30mm x 30mm x 3mm to be fixed by welding for rack 6 tire steel as per drawing No. FD-106 M after taking out old one carefully and fixing at original position including necessary assembling as required complete all as specified and as shown on drawings and as directed by Engineer-in-charge.

All as per serial item No. 142 above but for rack corner angle bracket of size 150 mm x 150 mm x 1 mm.

All as per serial item No. 142 above but for bottom/intermediate shelves made out of 1mm mild steel to be fixed by welding.

S&F table top 1200 x 610 mm office clerk steel as per drawing No. FD-307 made out of 19mm thick prelaminated particle board exterior grade one side teak and other side white with teak wood edging 19 x 4 mm thick edging all around table top after taking out the old unserviceable one complete all as specified and as shown on drawings and as directed by Engineer-in-charge.

M&L for welding certain places at long rail, side rails, leg and joint of table office clerk steel as per drawing No. FD-307 complete all as specified and as shown on drawings and as directed by Engineer-in-charge.

S&F side drawers with lock and handle of table office clerk steel as per drawing No. FD-307 after taking out the old unserviceable one complete all as specified and as shown on drawings and as directed by Engineer-in-charge.

S&F table top 1800 x 870 mm officer steel table as per drawing No. FD-306 made out of 19mm thick pre-laminated particle board of exterior grade one side teak and other side white with teak wood edging 19 x 4 mm thick edging all around table top after taking out the old unserviceable one complete all as specified and as shown on drawings and as directed by Engineer-in-charge.

M&L for welding certain places at long rail, side rails, leg and joint of table officer steel table as per drawing No. FD-306 complete all as specified and as shown on drawings and as directed by Engineer-in-charge.

S&F side drawers with lock and handle of table officer steel as per drawing No. FD-306 after taking out the old existing unserviceable one complete all as specified and as shown on drawings and as directed by Engineer-in-charge.

S&F table top as per drawing No. FD-1008 made out of 18/19mm thick pre-laminated particle board exterior grade one side teak and other side white with teak wood edging 19x4mm thick edging all around for table steel with drawer of size 900 x 600 x 760 mm after after taking out the old unserviceable one complete all as specified and as shown on drawings and as directed by Engineer-in-charge.

S&F side drawers with lock and handle of table steel with drawer as per drawing No. FD-1008 after taking out the old unserviceable one complete all as specified and as shown on drawings and as directed by Engineer-in-charge.

M&L for welding certain places at long rail, side rails, leg and joint table steel with drawer as per drawing no. FD-1008 complete all as specified and as shown on drawings and as directed by Engineer-in-charge.

S&F MS Square conduit of size 25mm of 16 gauge to table steel with drawer as per drawing No. FD-1008 making to shape after taking out the old existing unserviceable one complete all as specified and as shown on drawings and as directed by Engineer-in-charge.

S&F MS Square conduit of size 25mm of 16 gauge to table steel of size 900 mm x 900 mm x 760 mm as per drawing No. FD-1009 making to shape after taking out the old existing unserviceable one complete all as specified and as shown on drawings and as directed by Engineer-in-charge.

M&L for spot welding to broken joints/parts where ever required of table steel of size 900 mm x 900 mm x 760 mm complete all as specified and as shown on drawings and as directed by Engineer-in-charge.

M&L for table top of table steel 900 x 760 mm as per drawing No. FD-1009 made out of 18/19mm thick pre-laminated particle board exterior grade one side teak and other side white with teak wood edging 19x4mm thick edging all around after taking out the old unserviceable one complete all as specified and as shown on drawings and as directed by Engineer-in-charge.

S&F in repair PVC shoes of best quality for table steel of size 900 mm x 900 mm x 760 mm as per drawing No. FD-1009 complete all as specified and as shown on drawings and as directed by Engineer-in-charge.

S&F MS Square conduit of 25mm of 16 gauge to table steel of size 900 mm x 600 mm without drawer as per drawing No. FD-1007 making to shape after taking out the old existing unserviceable onecomplete all as specified and as shown on drawings and as directed by Engineer-in-charge.

M&L for spot welding to broken joints/parts where ever required of table steel 900x600mm without drawer complete all as specified and as shown on drawings and as directed by Engineer-in-charge.

M&L for table top of table steel 900 x 600 mm without drawer as per drawing No. FD-1007 made out of 18/19mm thick pre-laminated particle board exterior grade one side teak and other side white with teak wood edging 19x4mm thick edging all around after taking out the old unserviceable one complete all as specified and as shown on drawings and as directed by Engineer-in-charge.

S&F in repair PVC shoes of best quality for table steel of size 900 mm x 600 mm without drawer as per drawing No. FD-1007 complete all as specified and as shown on drawings and as directed by Engineer-in-charge.

Taking down old unserviceable long rail of GI charpoy and provision of new GI pipe 32mm dia, medium grade ISI marked long rail duly threaded 40mm at one end 22mm at other end and fixing complete all as specified and shown on drawing No. FD-220 and as directed by Engineer-in-charge. Make: Jindal / TATA / Surya.

M&L for cutting existing unserviceable long rail retrieved from item No 163 above and converting into short rails as per existing pattern/design duly threaded 22mm at both ends and fixing the same after taking out old unserviceable short rail complete all as specified and shown on drawing No. FD-220 and as directed by Engineer-in-charge.

M&L for cutting existing unserviceable short rail retrieved from item No 164 above and converting into legs all as per existing pattern/design and drawing duly threaded 22mm at one end and at other end 3mm thick plate, two Nos of 25mm dia and 40mm long ring made out of 5mm thick MS flat iron for MNF Set duly welded shall be provided and fixing the same after taking down unserviceable legs complete all as specified and shown on drawing No. FD-220 and as directed by Engineer-in-charge.

Taking down old unserviceable three way elbow from the GI charpoy & provision of new three-way elbow 32mm dia. ISI marked and fixed as per existing design/pattern complete all as specified and shown on drawing No. FD-220 and as directed by Engineer-in-charge.

Taking down old unserviceable check nuts from the GI Charpoy and provision of new GI check nuts 8 mm wide, 32mm dia ISI marked fixed as per existing design/pattern complete all as specified and shown on drawing No. FD-220 and as directed by Engineer-in-charge.

Taking down old unserviceable nylon newar from GI charpoys, tightening the frame in original shape. supply and fixing of plywood 6'-6" x 3' x 12mm thick on charpoy GI pipe with nut, bolt, washer and flat iron 150 x 50 x 5mm thick 06 Nos including 12 mm thick half round teak wood edging all around the ply wood top finished with french polish complete all as specified and shown on drawing No. FD-220 and as directed by Engineer-in-charge.

Taking down old unserviceable plywood from charpoy MS tubing Ply top supply and fixing of plywood 6'-6" x 3' x 12mm thick on charpoy MS Tubing with nut, bolt, washer as per drawing complete all as specified and as directed by Engineer-in-charge.

Taking down old unserviceable plywood from charpoy GI pipe Ply top and Supply and fixing of ply wood 6'-6" x 3' x 12mm thick on charpoy GI pipe ply top with nut, bolt, washer and flat iron 150 x 50 x 5 mm thick 03 Nos as per drawing No FD-220 complete all as specified and as directed by Engineer-in-charge.

Re-canning to chairs of following types with cane plastic 2mm and 4mm half round premier make of white color on both seat and back as per godrej patern all as specified shown on drawing Nos. FD-279, 280, 229 & 256 complete all as specified and as directed by Engineer-in-charge. (a) Chair writing (b) Chair dining (c) Chair easy (d) Chair varandha Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ.

M/S NARAYAN ENTERPRISE