MP Fund 2024 25 Construction of Anganvadi Centre at Ward No 15 Egai Nagar In Keeranur Town Panchayat

Amount

Earthwork excavation in all classes of soils such as hard stiff clay, stiff black cotton, hard red earth, shales,murram, ordinary earth, earth mixed with 50% fair sized boulders etc., with initial lead and lifts including laying, sprading, levelling sectioning breaking clods etc., incuding all incidential changes complete as per standard specification for foundation SS 20B

Supplying and filling in foundation and basement with filling Sand ( M Sand ) in layers of not more than 15 cm thick well rammed consolidated etc. complete complying with standard specification and as directed.

Cement concrete of mix 1:4:8 (One cement four sand eight aggregates) using 40mm guage hard broken including cost conveyance of all materials to site and labour charges, transporting and placing in position including shoring, forming protective bunds, cofferdams bailing out of water labour for mixing compacting, finishing and curing, working at depths, tools and plants and incidental charges such as sheeting, shoring and bracing and their subsequent removal etc., complete as per standard specification

Supplying & Erecting centering for sides & soffiots including necessary supports & strutting upto 3.29m height for plane surfaces in all floors with all cross bracings using mild steel sheets of size 90X60cm & 10 gauge stiffened, welded with steel angle of size 25 X25 X 3mm for boarding laid over silver oak joists (Country wood) of size 10X6.5cm spaced @ about90cm c/c and supported by casurina props of 10 - 13cm dia. spaced @ 75cm c/c etc., complete complying with standard specifications and as directed by the departmental officers. Rate for 10m2. for the following items. (RCC floor slab, roof slab, Rectangular / square, Tee / Ell beams, Lintels, staircase waist slabs, Landing slabs, Landing beam, Portico beam etc.,)

Column

Grade Beam

RCC 1:11/2:3 (One cement one point five sand and three aggregates) mix using 20mm gauge hard granite broken stone jelly in all RCC works connected to the work excluding shuttering, Centering and cost of Reinforcement grills but including curing, finishing etc completed

BRICK WORK in cement mortar 1:5 (One cement and five sand) using best quality of country bricks of size 8 3/4 "X 4 1/4" X 2 3/4" for the following including curing etc., complete complying with standard specifications.

Supply and fabrication of steel and placing in positon MS/Ribbed / Tor steel grills for RCC works as per design given including cost of steel and GI binding wire in floors etc., complete with standard specification

Supply and fixing of Mild Steel Door using MS angle, Steel plate including Cost and conveyance of all labour Charges etc., Cmplete Complying with as per standard specification

Supply and fixing of Mild Steel windows using MS angle, Steel plate and Squire rod including Cost and conveyance of all labour Charges etc., Cmplete Complying with as per standard specification

Supply and fixing of Mild Steel Ventilator using MS angle, Steel plate and Squire rod including Cost and conveyance of all labour Charges etc., Cmplete Complying with as per standard specification

Supply and fixing in position best white glassed earthen ware ORISSA TYPE INDIAN WATER CLOSET of approved quality of size 584mm with ‘P’ or ‘S’ trap and embedding the closet with trap to shaping position with 40mm brick jelly lime concrete 1:4:8 and finishing the top to the required slope and including the giving connection to the G.I. soil stacks by dismantling masonry floor of RCC works and redoing the same to the original conditions without any leakage etc., complete as per standard specification

Wiring with 2X1.5 sqmm (22/0.3) PVC insulated sc unsheathed Cu.conductor cable of 1100 V grade in suitable heavy gauge MS conduit pipe concealed in wall and ceiling with MS accessories with switch box with 5A F.T. switch(two way) in flush with wall and convered with 3mm thick hylem sheet for MS switch box with continous earth wire connection of 14 SWGTC wire and making good of the concealed portion with suitable colour for concealed stair case light point (SD.NO.24)

Wiring with 2X4 sqmm (56/0.3) PVC insulated SC unsheathed Copper conductor cable of 1100 V Grade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories 1 with 150mm X 100mm X75mm MS switch box for 15 A 3 pin non interlocking CS plug with continous earth wire connection of 14 SWG TC wire for concealed power plug point (SD12)

Supply and fixing of 1200mm (48") sweep AC ceiling fan complete with stepped electronic regulator, with 1 meter down rod with fan clamp with side plates and cross arm of size 450mm (18") SD NO. 102

Weathering course in Brick jelly and lime concrete using broken brick jelly of size 20mm uniform gauge in pure slacked lime (no sand to be used) the proportion of brick jelly to lime being 32:12.5 by volume laid over the RCC roof slab in a single layer of required design, slope and finished thickness by beating the concrete with wooden and beaters of approved pattern keeping the surface constantly wet by springing lime jaggery water etc,. complete as per standard specification and as directed by the Engineer incharge - 10cum

Finishing the top of roof with one course of PRESSED TILES of size (23cm X23cmX2cm) approved quality in cement mortar 1:3.12mm thick mixed with water proofing compound confirming to IS @ 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by departmental officers.

SPECIAL PLASTERING and finfishing all the RCC exposed surface such as RCC slabs, sunshades, canopies, staircase steps, landing slabs, etc. with cement mortar 1:3 (One cement and three sand) 10mm thick and including hacking the surfaces and providing necessary cement mortar nosing beading as per size, specification wherever necessary using the same mix as directed by the departmental officers etc., complete complying with standarad specification.

PLASTERING walls with cement mortar 1:5 (One cement and five sand) 12mm thick in all floors and all exposed surfaces including cost and conveyance of materials to site and all labour charges etc. complete.

Dadooing sides of walls with Glazed design tiles of size 200 x 200 x 6 mm set in Cement mortar 1:3 _ 20 mm thick and pointed with the same colour cement including cost and conveyence of all materials , labour charges complete as per standard specification.

Flooring with design ceramic tiles of size 305X305X6mm set in cement mortar 1:2mix using 12mm thick and pointed with the same colour cement including cost and conveyence of all materials, labour charges complete as per standard specification.

Providing the following thickness of Granolithic pattern floor finish with Plain Cement concrete 1 : 2 : 4 mix using 10-12mm ISS HBG metal and the top rubed smooth etc., complete complying with standard specification as directed. Rate for 10 m3 i. 20mm thick for Residential Buildingii.25mm thick. for Business office complex buildings, Bus stand, Shopping complex and School buildings.

Painting the new iron works, in all floors,two coats of best synthetic enamel paint of approved quality, colour and brand (to be approved by executive engineer before use on works) over one coat of primer including scrapping and preparation of surface, cost of brushes, high scaffolding charges, neat finishing, complying with standard specification and as directed by the departmental officers-10 m2(s.l.No.341-A)

Painting the new walls two coats over one coat of priming with best Ready mix plastic Emulsion paint of approved colour and quality including preparation of surface and finishing neatly etc., complete complying with standard specification and as directed by departmental officers

Supply and fixing of cudapah stone slab 50mm thicknees for cupboard arrangement including polishing etc., complete and as directed by departmental officers

Supply and fixing PVC rain water pipe 110mm .4 KSC /CM2 including cost of all materials and all labour charges etc., complete and as directed by departmental officers.

Supply, delivery and fixing of HDPE Tank with ISI marking (1000 liter capacity) including transportation, fixing etc., complete

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete

C MALATHY (BID ID -1251372)