construction of Ind. Water Works at village Nangal Pathani Construction of Boosting stn. at village Lilodh with balance distribution system at village Kohrar and Bawwa etc

Amount

Supply & Erection of Horizontal spindle split casing type pumping sets of following duties directly coupled to AC squirrel cage induction type motor with accessories as described in Schedule No. II complete in all respect with priming arrangement with complete base frame. A) (i) Raw water pump set at W/W 700 LPM 12 mtrs head with squirrel cage induction motor 1440 RPM, 3 phase 50 Hz of suitable rating.

b) Clear water pump set for village 700 LPM, 40 mtrs head with squirrel cage induction motor 1440 RPM, 3 phase 50 Hz of suitable rating

Supply and fixing following CI D/F pipe and Bell mount including cost of jointing materials, excavation, laying jointing reffilling including making adequate support of masonry/concrete steel for delivery and suction pipe from bell mouth in the suction scour well to the rising main laid by the departmetn as per plan shown forn the fondation wall of the pump chamber for all the raw water and clear water pumping sets at water works as per specification given in schedure No.II. Detail of pipe a) 100 mm i/d

b) 150 mm i/d

a) 200 mm i/d

Supply, erection, testing and commissioning Wall mounted electrical panel board, fabricated from 16 SWG CRCA sheet duly stouted with suitable angle iron frame work and completely powder coated of approximate size 1200x900 mm and 400 mm deep having following items complete in all respect as per approved NIT. Raw water pump set 700 LPM x 12mtr. head. a) Main switch 63 Amp. 1 No. & 100 Amp. 1 No. (L&T Siemens, ABB) b) Volt meter 100x100 mm range 0 to 500 Volt 1 No. AE/KAPPA/L&T) c) Amp meter 100x100 mm range 0 to 200 Amp. 1 Nos. AE/KAPPA/L&T) d) CT 100/3 Nos. (AE/KAPPA/L&T) e) VSS & ASS 1 No. each of approved make f) SPP 1 No. of approved make g) Motor starter, star delta 1 No. for 700 LPM x 12 M Head Motor (L&T Siemens, ABB) h) Capacity KVAR as per site requirement i) Indicating Lamp - One Set j) Change ove switch 63 amp=1 No. k) Electronic motor protection reley=1 No. (L&T, C&S, Seimens)

Supply, erection, testing and commissioning Wall mounted electrical panel board, fabricated from 16 SWG CRCA sheet duly stouted with suitable angle iron frame work and completely powder coated of approximate size 1200x900 mm and 400 mm deep having following items complete in all respect as per approved NIT. Clear water pump set 700 LPM x 40mtr. head 02 No. (one of each pump set). a) Main switch 63 Amp. 1 No. & 100 Amp. 1 No. (L&T Siemens, ABB) b) Volt meter 100x100 mm range 0 to 500 Volt 1 No. (AE/KAPPA/L&T) c) Amp meter 100x100 mm range 0 to 100 Amp. 2 Nos. (AE/KAPPA/L&T) d) CT 100/3 Nos. (AE/KAPPA/L&T) e) VSS & ASS 1 No. each of approved make f) SPP 1 No. of approved make g) Motor starter, star delta 1 No. for 700 LPM x 40 M Head Motor (L&T Siemens, ABB) h) Capacity KVAR as per site requirement i) Indicating Lamp - One Set j) Change ove switch 63 amp=1 No. k) Electronic motor protection reley=1 No. (L&T, C&S, Seimens)

Supply, erection, testing and commissioning Wall mounted electrical panel board, fabricated from 16 SWG CRCA sheet duly stouted with suitable angle iron frame work and completely powder coated of approximate size 500x1200 mm and 400 mm deep having following accessories:- 1. Incomer Switch 200 Amp. 2. Aluminum bus bar chamber of 300 Amp. Capacity. 3. Volt meter 100x100 mm range 0 to 500 V (AE/KAPPA/L&T) 4. Indicating lamp - one set

Supply erection, testing of ISI marked copper wire for 2 Nos motors with under ground system in PVC and flexible pipes copper wire size 10 mm, Sq three core complete in all respects with accessories like thimble etc.

Supply erection, testing of ISI marked copper wire for 2 No panel boards from main switch to panel and wiring of panel with size 6mm sq 3 core complete in all respects with accessories like thimble etc.

Supply erection, testing of light fittings including wire in the Pump chamber and store room with material upto 10 points including switch, button, plug, PVC conduict pipe & copper wire etc. as per approved specifications.( At water works and sumpwell)

Providing laying jointing and fixing of cast iron “V” notch duly marked with beam including embedding.

Providing & fixing suitable floating arms along with swivel bend as per required specifications approved by Engineer-incharge (250 mm)

Supply erection, testing of LED light 100 watt with fitting and accessories with blub of appproved make. (Crompton, Bajaj, Philips)

Providing and fixing exhaust fans 18" i/d (450mm) complete with suitable GI sheet of approved make complete in respects.

Providing and fixing ceiling fan 1200 mm (48") with speed adjuster of reputed make (Crompton, Usha, Bajaj, Orient) complete in respects.

Supply & erection of Wall Mounting Type, solenoid driven, motor-less electro-magnetic diaphragm Dozing/ Metering pump working on single-phase, 220/240 V 50 Hz electric supply with standard electronic controls suitable for minimum dozing capacity 0 to 5 LPH at 8 bar back pressure complete with necessary accessories.Make-Fontus or any other standard make Along with supply & erection of 1 No voltage stabilizer with each dozing pump alongwtih 1 No 300 ltrs. Capacity ISI marked HDPE storage tank, with each dozing pump of Sintex or other reputed & approved make. For Water works.

Operation &Maintenance of Water works as per Schedule-IV for a period of five years (74 months) after three months of trail run (will be charged to the A/mtc. estimate) for Nangal Pathani and Murlipur

Supply & Erection of Horizontal spindle split casing type pumping sets of following duties directly coupled to AC squirrel cage induction type motor with accessories as described in Schedule No. II complete in all respect with priming arrangement with complete base frame. A) Raw water pump set at W/W for Sum well at JLN Canal 2600 LPM 25 mtrs head with squirrel cage induction motor 1440 RPM, 3 phase 50 Hz of suitable rating.

Supply and fixing following CI D/F pipe and Bell mount including cost of jointing materials, excavation, laying jointing reffilling including making adequate support of masonry/concrete steel for delivery and suction pipe from bell mouth in the suction scour well to the rising main laid by the departmetn as per plan shown forn the fondation wall of the pump chamber for all the raw water and clear water pumping sets at water works as per specification given in schedure No.II. Detail of pipe a) 250 mm i/d

b) 150 mm i/d

Supply, erection, testing and commissioning Wall mounted electrical panel board, fabricated from 16 SWG CRCA sheet duly stouted with suitable angle iron frame work and completely powder coated of approximate size 1200x900 mm and 400 mm deep having following items complete in all respect as per approved NIT.Raw water pump set 2600 LPM x 25 mtr. head. (For Sump well) a) Main switch 100 Amp. 1 No. (L&T Siemens, ABB) b) Volt meter 100x100 mm range 0 to 500 Volt 1 No. (AE/KAPPA/L&T) c) Amp meter 100x100 mm range 0 to 200 Amp. 1 Nos. (AE/KAPPA/L&T) d) CT 100/3 Nos. (AE/KAPPA/L&T) e) VSS & ASS 1 No. each of approved make f) SPP 1 No. of approved make g) Motor starter, star delta 1 No. for 2600 LPM x 25 M Head Motor (L&T Siemens, ABB) h) Capacity KVAR as per site requirement i) Indicating Lamp - One Set j) Change ove switch 63 amp=1 No. k) Electronic motor protection reley=1 No. (L&T, C&S, Seimens)

Supply erection, testing of ISI marked copper wire for 2 Nos motors with under ground system in PVC and flexible pipes copper wire size 10 mm, 6mm Sq three core complete in all respects with accessories like thimble etc.

Supply erection, testing of ISI marked copper wire for 2 No panel boards from main switch to panel and wiring of panel with size 6mm sq 3 core complete in all respects with accessories like thimble etc.

Supply erection, testing of light fittings including wire in the Pump chamber and store room with material upto 10 points including switch, button, plug, PVC conduict pipe & copper wire etc. as per approved specifications.( At water works and sumpwell)

Supply erection, testing of LED light 100 watt with fitting and accessories with blub of appproved make. (Crompton, Bajaj, Philips)

Providing and fixing exhaust fans 18" i/d (450mm) complete with suitable GI sheet of approved make complete in respects.

Providing and fixing ceiling fan 1200 mm (48") with speed adjuster of reputed make (Crompton, Usha, Bajaj, Orient) complete in respects.

Supply & Erection of Horizontal spindle split casing type pumping sets of following duties directly coupled to AC squirrel cage induction type motor with accessories as described in Schedule No. II complete in all respect with priming arrangement with complete base frame. a) Clear water pump set for village 600 LPM, 40 mtrs head with squirrel cage induction motor 1440 RPM, 3 phase 50 Hz of suitable rating

Supply and fixing following CI D/F pipe and Bell mount including cost of jointing materials, excavation, laying jointing reffilling including making adequate support of masonry/concrete steel for delivery and suction pipe from bell mouth in the suction scour well to the rising main laid by the departmetn as per plan shown forn the fondation wall of the pump chamber for all the raw water and clear water pumping sets at water works as per specification given in schedure No.II. Detail of pipe a) 100 mm i/d

Supply, erection, testing and commissioning Wall mounted electrical panel board, fabricated from 16 SWG CRCA sheet duly stouted with suitable angle iron frame work and completely powder coated of approximate size 1200x900 mm and 400 mm deep having following items complete in all respect as per approved NIT.Clear water pump set 600 LPM x 40 mtr. head. a) Main switch 63 Amp. 1 No. & 100 Amp. 1 No. (L&T Siemens, ABB) b) Volt meter 100x100 mm range 0 to 500 Volt 1 No. (AE/KAPPA/L&T) c) Amp meter 100x100 mm range 0 to 200 Amp. 1 Nos. (AE/KAPPA/L&T) d) CT 100/3 Nos. (AE/KAPPA/L&T) e) VSS & ASS 1 No. each of approved make f) SPP 1 No. of approved make g) Motor starter, star delta 1 No. for 600 LPM x 40 M Head Motor (L&T Siemens, ABB) h) Capacity KVAR as per site requirement i) Indicating Lamp - One Set j) Change ove switch 63 amp=1 No. k) Electronic motor protection reley=1 No. (L&T, C&S, Seimens)

Supply erection, testing of ISI marked copper wire for 2 Nos motors with under ground system in PVC and flexible pipes copper wire size 10 mm, Sq three core complete in all respects with accessories like thimble etc.

Supply erection, testing of ISI marked copper wire for 2 Nos motors with under ground system in PVC and flexible pipes copper wire size 6mm Sq three core complete in all respects with accessories like thimble etc.

Supply erection, testing of light fittings including wire in the Pump chamber and store room with material upto 10 points including switch, button, plug, PVC conduict pipe & copper wire etc. as per approved specifications.

Supply erection, testing of LED light 100 watt with fitting and accessories with blub of appproved make. (Crompton, Bajaj, Philips)

Providing and fixing exhaust fans 18" i/d (450mm) complete with suitable GI sheet of approved make complete in respects.

Providing and fixing ceiling fan 1200 mm (48") with speed adjuster of reputed make (Crompton, Usha, Bajaj, Orient) complete in respects.

Supply and erection of wall mounting type solenoid driven, motor less electromagnetic diaphragm Dozing/metering pump working on single phase, 220-240 V 50 Hz electric supply with standard electronic controls suitable for minimum dozing capacity 0 to 5 LPH at 8 Bar back pressure complete with necessary accessories make fontus or any other standard make alongwith supply and erection of 01 No. voltage stabilizer with each dozing pump alongwith 01 No. 300 ltrs capacity ISI marked HDPE storage tank, with each dozing pump of sintex or other reputed & approved make.

Bidder Name

Amount

GABBAR SINGH SUHAG

BHARAT SINHMAR

SANJAY KUMAR CONT

SANJAY KUMAR CONT

BHARAT SINHMAR

BHARAT SINHMAR

SANJAY KUMAR CONT