Sustainability of source for various LWSS to Bulk Drug Park in Haroli Consty in Distt Una HP

Rough dressing trenched ground including breaking clods within all leads and lifts.

Fine dressing the trenched ground within all leads and

Excavation in foundation,trenches etc. in earth work in all kinds of soil such as pick work, jumper work, blassting hard of soft rock by chiselling such as pick work, jumper work, blasting hard or soft rock by chiselling where the blasting work is prohibited, slushy, daldal and saturated soil including pumping or bailing out water within all heights, stacking the excavated soil within all leads clear from the edge of excavation and then returning the stacked soil in 15cm (fifteen centimetres) layer when required into plinths, sides of foundation consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as per the direction of Engineer-in-Charge with in all leads and lifts.

Supplying and stacking of good earth at site including royalty including all leads and lift (earth measured in stacks will be reduced by 20% for payment) as per the direction of Engineer-in-Charge with in all leads and lifts.

Side slope stablisation in earth work in 15cm each layers for making earthen embankment including , ramming, watering, consolidating each layer including cost of earth and carriage upto site of work as per the as per the direction of Engineer-in-Charge with in all leads and lifts.

Supplying and stacking manure at site including royalty and carriage complete in all respect including all leads and lift. (Sludge measured in stacks will be reduced by 8% for payment) as per the direction of Engineer-in-Charge.

Spreading sludge dump manure or/and good earth in required thickness (cost of sludge, dump manure or/and good earth to be paid seperately) as per the direction of Engineer-in-Charge with in all leads and lifts.

Providing and Laying cement concrete 1:3:6 (1cement: 3 sand: 6 graded stone aggregate 40mm nominal size and curing complete excluding the cost of form work in foundation and plinth complete in all respect including all leads and lifts.

Providing and Laying cement concrete 1:3:6 (1cement: 3 sand: 6 graded stone aggregate 20mm nominal size and curing complete excluding the cost of form work in foundation and plinth complete in all respect including all leads and lifts.

Providing and laying cement concrete 1:5:10 (1 cement: 5 sand: 10 graded stone aggregate 40mm nominal size) and curing complete excluding cost of form work in. Foundation and plinth as per the direction of Engineer-in-Charge with in all leads and lifts.

Providing and Laying cement concrete work 1:1.5:3 (1cement:1.5 sand:3 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work:-

Foundation, footing, bases of columns and mass concrete as per the direction of Engineer-in-Charge with in all leads and lifts..

Wall (any thickness,but not less than 0.10 mtr.thickness) attached pilasters,buttresses, plinth & string courses etc. upto all heights complete within all leads and lifts as per the direction of the Engineer-in-charge.

Suspended floor roofs, landing and shelves and their support balconies, beam girderes bressumers and cantiliver upto all heights in all leads and lifts and as per the direction of the Engineer-in-Charge.

Brick work with common burnt clay bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand) complete in all respect including all leads and lifts

20 mm cement plaster of mix : Cement mortar 1:4 (1 cement : 4 coarse sand) complete in all respect including all leads and lifts

Bio media broken stone screened, washed and graded from 50mm - 75mm and 25 - 40 from approved source as per the direction of Engineer-in-Charge with in all leads and lifts.

Technology cost including Design & Drawing and supplying of Microphytes and enzymes at site including carriage within all leads and lifts.

Providing Tor steel reinforcement for RCC work including bending, binding & placing in position complete upto floor two level complete in all respect including all leads and lifts

Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm, so as to give a fair finish including centring, shuttering , strutting and propping etc. with wooden battens and ballies height of propping and centering below supporting floor to ceiling not exceeding 4meters and removal of the same for insitu reinforced concrete and plain.

Foundation and footing, bases of columns and mass concrete

Vertical surfaces such as walls (any thickness) partitions and the like I/c attached pillasters,buttresses, plinth and string courses and the like;

Flat surfaces such as soffits of suspended floors, roofs, landings and the like , floors etc, upto 200 mm in thickness

Supplying and spreading of good earth and consolidation with light power road roller etc. complete at site including royalty within all leads and lift as per direction of Engineer-in-Charge

Supplying and spreading Geo-liner/ Mamberance one mm thick within all leads and lift as per direction of Engineer-in-Charge

Supplying and spreading of Ventonite slurry and consolidation with light power road-roller etc. At site complete in all respect within all leads and lift as per direction of Engineer-in-Charge

Poviding Laying, jointing and commissioning of HDPE (High Density Polyethylene pipes) of 160 mm diameter class PE-80, grade PN 4.00 ( Confirming to IS 4984-2016) in proper position by butt fusionjoing procedure including hydraulic testing as per relevant IS Code, complete all material for jointing procedure like butt fusion welding machine with hydrolic jack, top loading clamp etc. pump and accessories for hydraulic testing and all labours as directed by engineer-in-Charge as per confirming to IS-7634 (Part II): 2012 ammended upto date with in all leads and lifts..

Providing and fixing of 3.15mm MS Sheet Manhole cover 600X600mm fixed on all sides with ISA 40x25x5mm top angle iron frame hinged on ISA 35x35x5mm bottom angle iron frame as per drawing. Pieces of MS Flat 20x4mm, 0.15m long be fixed on all sides as hold fast. The operation of manufacturing shall including cutting of MS Sheet, Angle Section & welding of MS Sheets, Angle Section, Hinges, Handles 150mm long, 20x4mm flats, locking arrangement and applying a priming coat of steel primer after pretreatment of surface to the entire satisfaction of the Engineer-in-Charge.

Boulder/ Stone soling dry hand packed tightly under floor with in all leads and lifts.

Dry stone pitching 22.5 cm thick including supply of stones and preparing surface complete in all respect including all leads and lifts.

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS:15801 UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, including trenching, refilling & testing of joints complete as per direction of Engineer-in-Charge. PN - 10 Pipe, 110 mm OD (SDR-11)

Supply of submersible pumping set of KSB/Calama/SU/Johnston/Crompton/BS/ SABAR/ Oswal/ Kirloskar make conforming to latest relevant BIS Code. The pump should be fitted with bronze impeller of suitable alloys as per IS 1520-1980 (latest) suitable for water lifted having greased packed bearings and shaft with wound stator on motor side and with soft protection sleeve on pump side ensuring better life for shaft coupled to a submersible squirrel cage electric induction motor (water proof type) of required HP & 2900rpm of reputed make conforming to BIS 9283-1979 latest with upto date amendments, totally dust and water proof for submersible duty isolated from the pump by intermediate casing with double mechanical seal in oil chamber and grease packed lubricated bearings and provided with stainless steel thrust bearing plate to with stand non vertical loads with minimum wear and tear. It should also be fitted with a device to take up expansion of water with the heating of motor. The pump set should include water level guards, erection clamps , cable clips and depth gauge including starter, panel, cable and all other associated accessiories etc.

For Aeration Fountain System 1x5 = 5 HP

For Cascading & Aeration System 2x2 = 4 HP

Providing and laying of one No. copper conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade direct in ground; to be laid 1 meter below the ground level including excavation sand cushioning, protective covering and refilling the trench etc. of the required size: - Armoured cable 10 sq. mm (twin core).

Providing, fixing and Installation of Floating/ Fixed Fountain for Aeration System comprising of Lilly Nozzle Made in Brass with shine Chrome CNC Cutting Nozzle Specification: - Bronze/Gunmetal/Brass of approved make at site including carriage within all leads and lifts.

40mm thick Cement concrete flooring 1:2:4(1cement:2sand:4 graded stone aggregate 20mm nominal size) laid in one layer finished with a floating coat of neat cement complete in all respect including all leads and lift.

Supplying and erection of 4 mtr Decorative Poles made of galvanised Mild steel pipes fitted withcast aluminium/ iron embellishments duly polyurethane paint coated. Bottom dia-139.7 (1M), Top dia- 76.1 (3M), Base plate-300x300x10mm, with foundation nuts & bolts MFHD - 203 (2.5 inch pipe fitted on top portion of pole) without wiring complete in all respect including all leads and lifts

Supplying and errection of LED Post Top Lights BGCTNP 40W WW on Pole of apprved brand and manufecture including all accessories at site including carriage within all leads and lifts.

Supplying and errection of Fency Lights (Laddi type) 4 mtr length arround the Pole from bottom to top of apprved brand and manufecture including all accessories at site including carriage within all leads and lifts.

Steel Work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of re lead paint.( In gratings framed guard bars, ladders, railings, brackets and similar works.) complete in all respect including all leads and lifts.

Painting two coats (excluding priming coat) on new steel and other metal surfaces with enamel paint to give an even shade including cleaning the surface of dirt ,dust and other foreign matter with enamel with enamel paint other than white complete in all respect as per the direction of the Engineer-in-Charge.

Supplying of waterfouls complete in all respect as per direction of Engineer-in-Charge complete in all respect including all leads and lifts.

Small

Supplying and fixing DUSBIN as per the directionof Engineer-in-Charge with in all leads and lifts

Providing & fixing 0.60 mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 micron over 5 micron primer coating to back coat of polyster of 5 micron over 5 micron primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm diameter s with prepainted limpet rubber washers complete in all respect within all leads and lifts and to the entire satisfaction as per the directions of Engineer-in-Charge.

Providing ridges or hips 60 CM overall with .60 mm thick prepainted steel sheets in roofing with hot dipped metalic zinc coated sheets with to coat of regular plain with galvanised iron GI sheet fixed J or L hooks, bolts & nuts 8 mm dia GI limpet & bitumens washer complete. (0.63 mm THICK GI SHEET) complete in all respect within all leads and lifts and to the entire satisfaction as per the directions of Engineer-in-Charge.

Grassing with 'Doob' grass in rows 5 cm. Apart in either direction including watering and maintenance of the Lawn for 30 days or more till the grass from a thick lawn free from weeds and fit for moving including supplying good earth if needed (the cost for Doob grass shall be paid seperately).

Providing and laying in trenches, galvanized mild steel tubes (Medium grade) folloing dia including tube fittings such as bends, Tee, Union etc (earth work in trenches to be measured & paid for separately). complete in all respect within all leads and lifts and to the entire satisfaction as per the directions of Engineer-in-Charge. 100mm dia

Supplying and planting of potted plants at site including carriage within all leads and lifts.

Golden Unifresh

Gycus Palm

Rubenia Palm

Habiscus (big)

Supplying and fixing of Signage Boards with flex printing of Tubular Section frame of required and shapes including righting of water conservation slogans complete with all accessories at site including carriage within all leads and lifts.

Provision for Design, Drawings and vetting charges Reguvenation and restoration of existing structures for Water Retaining Structure for Pond Development, Rejuvenation, Inlet Chamber, Wetland to treat raw Water, Aeration Fountain system to improve dissolved Oygen etc. and Integrated Development Works, and approval of the competent authority of department complete in all respect.

Please Enable Macros to View BoQ information