Construction of Pucca Link road Panoh Barrian Alyon Danoghat road km 3/0 to 15/730 including bridge over Alyon Khad (Under RIDF - XXVI) (SH-Formation cutting, (R.O.F.D.) X-Drainage, Soling, M.T., Parapets etc. and

Amount

Excavation in hilly area in all heights and depths and in all kind of soil by mannual/mechanical means including saturated soil comprising of ordinary soil,soft rock,hard rock chiselling,wedging out of rock(where blasting is prohibited) and their intermediate classification of soil, setting out true to the required lines grades width cutting and trimming of side slopes and level as shown in the drawing and as directed by Engineer-in-Charge at site according to the MORD technical specification clause 302,1603 and 1603.2 and sorting out useful materials and stacking the same in all leads and lifts in acquired width of road and transporation of unuseful material for filling in road ways camber,embankments for grade improvements and disposal of all material to required width of the road or on approved dumping site through all modes of transporation including head load or animal transport or mechanical means alongwith its levelling fine dressing and carriage of machineries ,materials, tolls,equipments and safety measures and incidentials necessary to complete the work by mechanical means and labour, if required all useful materials such as stones,shingle aggregate and slates etcetra. shall be sort out stacked and measured.Recovery at the rate of Rs. 170/- (Rupees one hundred seventy) per cubic metre shall be effected from the bills for the quantity actually measured or 1689.59 cubic metre which ever is more. Any loss to the public private property during the course of execution shall be the absolute respensibility of the contractor which shall have to be compensated by him in all cases.

Earth work in excavation for all type of road structure such as Retaining Structure, culverts, parapets, side drain exctra in all type of classification of soil comprising of ordinary soil,ordinary rock,hard rock, by mechanical/mannual means chiselling/wedging out rocks(where blasting is prohibited) as per drawings and MORD technical specification clause 305.1 and as per direction of the Engineer-in-charge including setting out,construction of shorting and bracing,removal of stumps and other deletrious materials and disposal of materials upto any lead and and upto any lift including dressing of sides and bottom and back filling in trenches with excavated suitable approved material including shorting and strutting and pumping and bailing out water(surface and sub soil water) upto any depth any quantam of water including cleaning of slush which may arise out during dewatering as per direction of Engineer-in-charge including carriage of materials within all leads and lifts and other incidentials.

Providing and laying mechanically mixed and vibrated plain cement concrete in foundation for all type of structure complete of plain concrete nominal mix 1:4:8 (one cement isto four sand is to eight graded stone agreegate 40 mm (forty millimetre) nominal size) in or under water and curing complete and including pumping or bailing out water,dewatering,removal of slush as required at site which may arise at the time of laying under water complete for all heights/depths including the cost of form work complete in all respect as per drawing and technical specification clause 802.803,1202-1203 and as per the direction of the Engineer-in-charge including carriage of material through all modes of transportation within all leads and lifts and other incidential. The rate including of octroi, royality, Malkana, Tol Tax, GST and other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated plain cement concrete in foundation for all type of structure complete of plain concrete nominal mix 1:4:8 (one cement isto four sand is to eight graded stone agreegate 25 mm (Twenty five millimetre) nominal size) in or under water and curing complete and including pumping or bailing out water,dewatering,removal of slush as required at site which may arise at the time of laying under water complete for all heights/depths including the cost of form work complete in all respect as per drawing and technical specification clause 802.803,1202-1203 and as per the direction of the Engineer-in-charge including carriage of material through all modes of transportation within all leads and lifts and other incidential. The rate including of octroi, royality, Malkana, Tol Tax, GST and other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated concrete for plain/reinforced concrete in open foundation for all type of structure complete of plain cement concrete grade M-10 (M-ten) nominal mix 1:3:6 ( one cement: three sand: six graded crushed stone aggregate 40mm (forty millimetre) nominal size in or binder water and curing complete including pumping or bailing out water,dewatering removal of slush as required at site which may arise at the time of laying under water complete for all heights/depths excluding the cost of form work as per drawing and MORD technical specification clause-802,803,1202 and 1203 as per the direction of the Engineer-in-charge including carriage of material through all modes of transportation within all leads and lifts and other incidential. The rate including of octroi, royality, Malkana, Tol Tax, GST and other taxes imposed by the Government.

Providing and laying ( to be level or slope) 900 mm dia ( Nine hundred millimetre) diameter reinforced cement concrete heavy duty non pressure pipes IS class NP-2 for culverts on first class bedding or granular material in single row including fixing collar with cement mortar 1:2 (one cement: two sand) but excluding the cost of excavation,protection works,back filling,concrete and masonry work in head walls and parapets as per drawing and MORD technical specifications clause 1101 and as per the direction of the Engineer-in-charge including carriage of material through all modes of transportation within all leads and lifts and other incidential. The rate including of octroi, royality, Malkana, Tol Tax, GST and other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated reinforced cement concrete nominal mix 1:2:4 ( one cement:two : sand:four graded crushed stone aggregate grade M-20 (twenty milimeter) nominal size mix design to obtain the minimum compressive strength of grade M-20(twenty) open foundation including the cost of form work for reinforced concrete work as per drawing and MORD technical specification for Roads clause-802, 803, 1202 & 1203 and curing complete including, curing hauling of materials in all kinds of leads, lifts and other incidental, as per the direction of the Engineer-in-charge iThe rate including of octroi, royality, Malkana, Tol Tax, GST and other taxes imposed by the Government.

Construction of embankment with approved materials deposited at site from road way cutting and excavation from drain and foundation of all other structure or other sources graded and compacted in 200 mm(two hundred millimetre) thickness with three wheel static Roller l 80-100(eighty hundred) Kilo Netwon static weight road roller to meet requirementof table 300.1 and 300.2 as per MORD technical speficiations clause 301.5 and as per the entire satisfaction and direction of Engineer-in-charge including carriage of materials within all leads and lifts and other incidential . The rate including octroi, royality, Malkana toll tax ,GST and other taxes imposed by the Goverment.

Providing and laying filter media with granular crushed aggregate as per specification to thickness of not less then 600 mm with smaller size towards the soil and bigger size towards the walls and providing over the entire surface behind abutment, wing wall, retaining walls to the full height, completed to firm condition complete as per drawing and technical specification clause 1204.3.8.IRC 78 710.1.4 Appandez6(2) and as per the direction of Engineer -in - Charge including carriage of material in all leads, lifts and other incidentials

Providing weep holes in brick masonry/stone masonry/plain reinforced concrete abutments, wing walls, return walls with 100 mm(One hundred millimeters) dia PVC pipe extending through the full width of wall/structure with slopes of 1(One) (v): 20(Twenty)(H) towards drawing and technical specification clause 614, 709,1204,3.7 and 1206.6as per the direction of the Engineer-in-charge including carriage of material through all modes of transportation within all leads and lifts and other incidential.

Providing and laying mechanically mixed and vibrated reinforced cement concrete nominal mix M 25 (twenty five mili meter) 1:1.5:3 ( one cement: one ponit five sand: three graded crushed stone aggregate grade 25 mm (twenty five mili meter)) nominal size mix design to obtain the minimum compressive strength of grade M-25 (M-twenty five) open foundation including the cost of form work and reinforcement for reinforced concrete work in deck,slab,beams girders and bressumers etcetra per drawing and MORD technical specification for Roads clause-800,400,1000,1401 and curing complete including hauling of materials in all kinds of leads ,lifts and other incidental, as per the direction of the Engineer-in-charge including carriage of material through all modes of transportation within all leads and lifts and other incidential. The rate including of octroi, royality, Malkana, Tol Tax, GST and other taxes imposed by the Government.

Providing and laying cement concrete wearing course M-30 Grade including reinforcement and curing complete for all heights/depths excluding the cost of form work as per drawing and MORD technical specification clause-1404.2.2 to 1404.2.4 as per the direction of the Engineer-in-charge including carriage of material through all modes of transportation within all leads and lifts and other incidential. The rate including of octroi, royality, Malkana, Tol Tax, GST and other taxes imposed by the Government.

Supplying and fitting and placing HYSD bar reinforcement in super structureas per drawing and Technical specifications 1000,2011.3 including carriage of materials within all leads and lifts and as per the directions of Engineer-in-charge.

Plain/ reinforced cement concrete in substructure complete as per drawings and technical specification Clauses 802, 804, 1202, and 1203 P.C.C grade M 15 Nominal mix (1:2.5:5) including carriage of materials within all leads and including incidentials lifts and as per the directions of Engineer-in-charge.

Construction of precast RCC railing of M30 (M-Thirty) Grade, aggregate size not exceeding 12 mm (Twelve milimeter), true to line and grade, tolurence of vertical RCC post not to exceed 1 in 500 (one in five hundred), centre to centre spacing between vertical post not to exceed 2000 mm (Two thousand only), leaving adequate space between vertical post for expansion, complete as per approved drawings and MORD technical specifications 800,900,1000 ,1404.3.3 including carriage of materials within all leads and lifts and as per the directions of Engineer-in-charge.

Drainage Spouts complete as per drawing and Technical specifications 1404.5 (MORD) including carriage of materials within all leads and lifts and as per the directions of Engineer-in-charge.

Providing and laying mechanically mixed and vibrated concrete for plain/reinforced concrete in open foundation for all type of structure complete of plain cement concrete nominal mix 1:6:12 ( one cement: six sand: tweleve graded crushed stone aggregate 40mm (forty millimetre) nominal size in or binder water and curing complete including pumping or bailing out water,dewatering removal of slush as required at site which may arise at the time of laying under water complete for all heights/ depths excluding the cost of form work as per drawing and MORD technical specification clause-802,803,1202 and 1203 as per the direction of the Engineer-in-charge including carriage of material through all modes of transportation within all leads and lifts and other incidential. The rate including of octroi, royality, Malkana, Tol Tax, GST and other taxes imposed by the Government.

Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 as per HPPWD specifications and as per the direction of the Engineer-in-charge including carriage of material through all modes of transportation within all leads and lifts and other incidential. The rate including of octroi, royality, Malkana, Tol Tax, GST and other taxes imposed by the Government.

Preparation of sub-grade by dressing to camber (earth work involved for cutting for sub grade to be paid for separately depending upon the classifications of soil ) complete as per HPPWD specifications as per the direction of the Engineer-in-charge including carriage of material through all modes of transportation within all leads and lifts and other incidential. The rate including of octroi, royality, Malkana, Tol Tax, GST and other taxes imposed by the Government.

Construction of sub-grade with road roller including making good the undulation etcetra with earth or quarry dust etcetra and rerolling the sub grade with road roller complete as per the direction of the Engineer-in-charge including carriage of material through all modes of transportation within all leads and lifts and other incidential. The rate including of octroi, royality, Malkana, Tol Tax, GST and other taxes imposed by the Government.

Construction of granular sub-base by providing well graded materials, spreading in uniform layers with mortor grader on prepared surface mixing by mix in place method with rotavator at OMC and compacting with three wheel 80-100(eighty -hundred) KN static roller to achive the desired density complete as per technical specification clause 401.4 for grading -1 Material as per the direction of the Engineer-in-charge including carriage of material through all modes of transportation within all leads and lifts and other incidential. The rate including of octroi, royality, Malkana, Tol Tax, GST and other taxes imposed by the Government.

Providing, laying, spreading and compacting stone aggregate of specific sizes 63mm to 45mm (Sixty three millimeter to forty five millimeter) Grading-II 75mm (seventy five millimeter) consolidated thick to water bound Macadam specification including spreading in uniform thickness using template, hand packing rolling with three wheel 80-100 ( Eighty to Hundred) kilo newton static roller in stages to proper grade and camber including applying and brooming stone screening ,type-B, 11.2 mm (eleven point two millimeter ) at the rate of 0.20 ( Zero point two ) cubic meter per 10 square meter( ten square meter) of road surface to fill up the interstices of coarse aggregate, watering and compacting to required density as per MORD technical specifications clause- 405 including carriage of materials with in all leads, lifts as per the direction of the Engineer-in-charge including carriage of material through all modes of transportation within all leads and lifts and other incidential. The rate including of octroi, royality, Malkana, Tol Tax, GST and other taxes imposed by the Government.

Providing laying spreading and compacting stone aggregate size 53 mm to 22.40 mm (fifty three millimetre to twenty two point four millimetre) Grading-IIII (75mm)(seventy five millimetre) consolidated thick ) to water bound Macadam,specification including spreading in uniform thickness using template,hand packing rolling with three wheel 80-100 KN static roller in stages to proper grade and camber applying and brooming stone screening type-B of size 11.2mm ( eleven point two millimetre) nominal size at the rate of 0.18 cum (zero point eighteen cubic metre) ) per ten squared metres and to fill up the interstices of course,aggregate watering and compating to the required density as per MORD technical specifications clause No. 405 and as per the direction of the Engineer-in-charge including carriage of material through all modes of transportation within all leads and lifts and other incidential. The rate including of octroi, royality, Malkana, Tol Tax, GST and other taxes imposed by the Government.

Providing and applying primer coat with Bitumen (SS-1) Grade on the prepared surface of granular base including cleaning of road surface and spraying primer @ 0.85(Zero point Eighty five) Kilogram per Square meter using mechanical means as per technical specification Clause 502. including hauling of material in all leads lift as per the direction of the Engineer-in-charge including carriage of material through all modes of transportation within all leads and lifts and other incidential. The rate including of octroi, royality, Malkana, Tol Tax, GST and other taxes imposed by the Government.

Providing and applying tack coat with bitumen emulsion (RS-1) using bitumen emulsion distributor @ 0.275 ( Zero point Two seven five) kilogramme per square meter on the prepared granular surface treated with prime and cleaned with hydraulic broomsusing mechanical means as per technical specification Clause 503. including hauling of material in all leads lift as per the direction of the Engineer-in-charge including carriage of material through all modes of transportation within all leads and lifts and other incidential. The rate including of octroi, royality, Malkana, Tol Tax, GST and other taxes imposed by the Government.

Providing, laying Semi Dense Bituminous Concrete with 100-120 TPH batch type /60-90 TPH Drum type hot mix plant providing of 75 tonne per hours using crushed aggregate of specified grading premixed with bituminous binder @ 4.5 to 5.00 percent of mixer and fillers, transporting the hot mix to work site laying with hydrostatic paver finisher with cencer control to the required grade , level and alignment, rolling with smooth wheeler, vibrating and fonder roller to achieve the desired compection as per MORTH specification clause-508 complete in all respect

Providing and Laying of Interlocking Concrete Block Pavements having thickness 80 mm as per drawings and Technical Specification Clause 1504.

Reinforced cement concrete M-15(fifteen) grade ordinary kilometer stone, precast of standard design as per IRC-8 (Eight) fixing in position including painting and printing etcetra as per drawing and technical specifications rural roads August 2004 clause 1703. as per the direction of the Engineer-in-charge including carriage of material through all modes of transportation within all leads and lifts and other incidential. The rate including of octroi, royality, Malkana, Tol Tax, GST and other taxes imposed by the Government.

Reinforced cement concrete M-15(fifteen) grade 200 meter stone precast of standard design as per IRC-8 (Eight) fixing in position including painting and printing etc. as per drawing and technical specifications rural roads August 2004 clause 1703 as per the direction of the Engineer-in-charge including carriage of material through all modes of transportation within all leads and lifts and other incidential. The rate including of octroi, royality, Malkana, Tol Tax, GST and other taxes imposed by the Government.

Providing and fixing of typical NABARD informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm ( One point six millimeters)thick, top and middle plate duly welded with MS flat iron 25mm x 5mm ( Twenty five millimeters in to five millimeters)size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm.( Twenty five millimeters in to Twenty five millimeters in to five millimeters) The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm (Seventy five millimeters in to seventy five millimeters) of 12( Twelve) SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm ( four hundred fifty millimeters in to four hundred fifty millimeters in to six millimeters), 600 mm ( Six hundred millimeters) below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm ( Forty seven millimeter in to forty seven millimeters) of 12 ( Twelve) SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy as per drawing and Technical specifications MORD 1700 including carriage of materials within all leads and lifts and other incidentials as per the directions of Engineer-in-charge.

Earth work in excavation for all type of Bridge structure by all means in all type of soil comprising of ordinary soil, ordinary rocks ,hard rocks, Chiselling/wedgingout of rocks(where blasting is prohibited) as per drawing and in accordance with requirement of MORTH technical specificationclause 304, 305.1 and as per direction of the Engineer-in-charge including setting out, construction of necessary cofferdams and cribs and their subsequent removal,necessary sheeting,shoring, bracing,draining,pumping,bailingout any quantum of water (surface and sub soil water) up to all depths , cleaning of slush which may arrise out during dewatering, removal of logs,stumps,grubs and other deleterios materials and obstructions, necessary for placing the foundation including dressing of sides and bottom and backfilling in trenches with excavated suitable approved materials to the original surface in layers not exceeding 150mm ( one hundred fifty millimeters) compacted thickness , clearing up the site and disposal of all surplus material including carriage of material , labour and machienery with in all leads and lifts and other incidentals.

Providing & laying Plain cement concrete 1:3:6 ( one cement: three sand: six graded crushed stone aggregate) nominal mix in foundation with crushed stone aggregate 40 mm (forty millimetre) nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 ( fourteen) days complete as per MORTH specifications including carriage of materials within all leads lifts and other incidentials and as per the directions of Engineer-in-charge.

Providing and laying Cement concrete M-20 (M-Twenty) grade as per drawing and Technical Specifications MORTH 1200,1500,1700 complete as per drawing and Technical specifications including carriage of materials within all leads and lifts and as per the directions of Engineer-in-charge.

Supplying and fitting and placing HYSD bar reinforcement in sub -structureas per drawing and Technical specifications MORTH 1600 & 2200 including carriage of materials within all leads and lifts and as per the directions of Engineer-in-charge.

Back filling with Granular material behind abutment, wing ball and return wall complete as per drawing and technical specification 2200 of MORTH and 710.1.4 of IRC :78 including carriage of materials within all leads and lifts and as per the directions of Engineer-in-charge.

Providing weep holes in brick masonry/stone masonry/plain reinforced concrete abutments, wing walls, return walls with 100 mm(One hundred millimeters) dia PVC pipe extending through the full width of wall/structure with slopes of 1(One) (v): 20(Twenty)(H) towards drawing and technical specification clause MORTH 2706.00as per the direction of the Engineer-in-charge including carriage of material through all modes of transportation within all leads and lifts and other incidential.

Supplying fitting and fixing in position true to line and level POT – PTEF bearing consisting metal piston supported by a disc unreinforced elastomer confined with in a metal cylinder, sealing rings, dust seal PTEF surface sliding against stainless steel mating surface. Complete assembly to the cast steel /fabricated structural steal metal and elastomer elements To ba as per I.RC:83 Part-I-II respective and other part conforming to BS 5400, Section 9.1 & 9.2 and clause 2006 of MORTH specification complete as per drawing and as per the direction of Engineer - in - charge including carriage of labour and material to various locations through all modes of transporation in all leads and lifts and including all incidential.

Furnishing and Placing Reinforced/ Prestressed cement concrete in super-structure as per drawing and Technical Specification Using Batching Plant, Transit Mixer and Concrete Pump RCC/PSC grade- M30 ( M-Thirty) as per drawing including carriage of materials within all leads and lifts and as per the directions of Engineer-in-charg and MORTH specification 1500,1600,1700.

Providing and laying cement concrete wearing course M 30 Grade including reinforcement and curing complete as per drawing and technical specifications of MORTH 2702.2,1700 & 1600 and as per the direction of Engineer - in - charge including carriage of labour and material to various locations through all modes of transporation in all leads and lifts and including all incidential.

Supplying and fitting and placing HYSD bar reinforcement in super structure complete as per drawing and technical specification MORTH 1600 including carriage of materials and other incidentials within all leads and lifts and as per the directions of Engineer-in-charge.

Construction of precast RCC railing of M30 (M-Thirty) Grade, aggregate size not exceeding 12 mm (Twelve milimeter), true to line and grade, tolurence of vertical RCC post not to exceed 1 in 500 (one in five hundred), centre to centre spacing between vertical post not to exceed 2000 mm (Two thousand only), leaving adequate space between vertical post for expansion, complete as per approved drawings and technical specifications 1500,1600 ,1700 &2703.3 (MORTH) including carriage of materials within all leads and lifts and other incidentials and as per the directions of Engineer-in-charge.

Drainage Spouts complete as per drawing and Technical specifications MORTH 2705 including carriage of materials within all leads and lifts and other incidentials as per the directions of Engineer-in-charge.

Providing and laying of a strip seal expansion joint catering to maximum horizontal movement upto 70 mm ( Seventy millimeters) , to be installed by the manufacturer/supplier or their authorised representative ensuring compliance to the manufacturer's instructions for installation as per drawing and specifications 2702 including carriage of material within all leads and lifts and as per the directions of Engineer-in-charge.

Providing and fixing in position 20 mm ( Twenty millimeters) thick premoulded joint filler in expansion joint for fixed ends of simply supported spans not exceeding 10 m to cater for a horizontal movement upto 20 mm ( Twenty millimeters) , covered with sealant complete as per drawing and technical specifications MORTH 2604 within all leads and lifts and other incidentials complete as per the directions of Engineer-in-charge.

Providing and applying 2 ( Two) coats of water based cement paint to unplastered concrete surface after cleaning the surface of dirt, dust, oil, grease, efflorescence and applying paint @ of 1 ( one) litre for 2 sqm. ( Two square meters) as per drawing and Technical specifications MORTH 800 including carriage of materials within all leads and lifts and ther incidentials complete as per the directions of Engineer-in-charge.

Routine maintenance after complition of construction work as per terms and condition of bid document that is 4 of contract data to general condition of contract and technical specifications of Ministry of Rural Development for rural roads August 2004 ( Two thousand Four ) for rural , including hauling / carriage of all labour equipments and materials to various locations through all modes of transporations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-charge

For 1st Year

For 2nd Year

For 3rd Year

For 4 th Year

For 5th Year

lrc builders privated ltd