ADDN/ALTN OF BLDG NO T-1 (LAB EXPERIMENTAL FOR LARGE ANIMAL) AT CENT MIL VET LAB UNDER GE(U) MEERUT CANTT

Amount

Demolition brickwork or stone work built in cement mortar including all quoins arches , pillers etc,complete all as specified & directed.

M&L for brick work with fly ash bricks ( old size) straight or curved in plan exc 6 m mean radius , built in CM 1:6 complete all as specified and directed.

M&L rendering 15 mm thick on fair faces of brick work or concrete surface in CM 1:6 ,complete all as specified & directed.

M&L rendering 15 mm thick on fair faces of brick work or cocrete surfaces in CM 1:4, complete all as specified & directed.

S& F pressed steel frames size 125X60mm for doors with one or more rebates including necessary fixing lugs hings lock strike plats complete all as specified & directed.

S&F solid PVC door frame of size 50mm X 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S square tube in opening as per specification in drawing.

M&L cement concrete type B0 1:2:4 (12.5mm graded aggregate) as filling in door frame complete all as specified & directed.

S&F 35 mm thick glazed and skelton shutters open rebated and prepared to recevie gauze etc ( with out sash bars ) edges of framing plain chamfered or rounded fitted with cut and mitered beads for secruing glass etc, sizes of members of shutters as specified in SSR Part I section 8 clause 8.24 ( a)

S&F factory made shutters 35 mm thick plain framed panelled shutter ( Two panel ) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercila veneering on both faces ,. The size of rail and stile as per IS : 1003 ( part 1) kiln seasoned and chemically pressure treated complete

S&F factory made solid panel PVC door shutter 30mm trick ( style) consisting of frame made out of M.S tubes for top & bottom rails M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colourPVC sheets on top rail, lock rail & bottom rail, rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stile & rails with suitable PVC sheet beading , and jointed together with solvent cement as per specification in drawing

S&F for 300mm length of bolt aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cost aluminium alloy complete all as specified & directed.

S&F for 150mm size extruded aluminium alloy handles, fabricated type, anodised all as specified and directed.

S&F for aluminium, anodised barrel tower bolt of extruded section and fixed 150mm of size all as specified and directed.

S&F 100 butt hings heavy weight cold rolled mild steel complete all as specified & directed.

S&F 150 mm overall length of cover plate floor door stopper of aluminium alloy body and tougue with hard drawn steel spring complete all as specified & directed.

S&F galvanised mild steel wire cloth 0.63mm nominal dia of wire and average width of 1.40 mm and fixed with tinned track or galvanised wire staples complete all as specified & directed.

S&F aluminium glazed window shutters, Three track (each shutter approx. half the size of opening with two Nos. glazed shutter and 1 No. wire gauged shutter including necessary jointing cleats for fixing etc, glazing clips, rubber packing, aluminium anodised snap beading, screws, aluminium (anodised) fittings such as handle clips (suitable size), locking device, and glazing in panels with 5.0mm thick coloured/tinted glass and gauged with 0.36mm dia, 1.40mm aperture SS wire mesh sing Jindal Aluminium Section Id 491, 4309, 4310, 8853, 8851, 9205 complete all as specified and shown in drg and as directed by Engineer-in-Charge. (In case of non-availability of any particular section, the higher section in terms of Kg/rm shall be provided without any extra cost to govt.

Supply & fixing aluminium anodised grill of approved shape with opening in grill 66mm x 80mm (diagonally) or nearest to + 5mm made out of standard aluminium moulded section of size 6mm x 7mm

S&F anonised aluminium snap grid size 605X605 mm frame work for false ceiling including 6 mm dia GI hanger up to 2.0 m height complete all as specified & directed.

M&L perforated particle board/ tiles for insulation and accoustic purpose 60X60 cm in size fixed with on frame work or with staple on snap grid as in ceiling flat or sloping complete all as specified & directed.

M&L for 25 mm thick cement concrete type B-0, 1:2:4 using 12.5mm graded aggregate in sub base of floors etc.

M&L vitrified ceramic glossy finish shade with double charged 10 mm thick (sqaure/rectangular) area of each tiles exc. 0.42 Sqm and n. exc 1.00 sqm ,(1200mm*600mm ) in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match existing tiles and including 15 mm thick screed bed or bedding layer of mortar 1:6 for laying floor finishes complete.(Note:-Tile colour and pattern approved by Engr-in-charge)

Ditto as per above item but on vertical surfaces over and including 10 mm thick backing coat in CM 1 : 4,complete all as specified & directed.

M&L non skid ceramic tiles any colour 7 to 8 mm thick ( square/rectangular ) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and over and including 15 thick screed bed in CM 1:6 complete.(As approved by Engr-in-Charge)

M&L for glazed digital ceramic coloured tiles Ist quality in vertical surfaces such as in skirting and dados 300*600*7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and icluding plaster in CM 1:4 complete all as specified & directed.

S&F for bib taps, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed for size 15mm bore.

S&F stop valve 15 mm dia cast chromium plated screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions and fixed complete all as specified & directed.

S&F 20mm dia fancy type Harrison rails, stainless steel chromium including plated with fixing brackets, stops, rollers etc complete all as specified & directed.

S&F PVC connection 450mm long with check nut for wash hand basin etc complete all as specified & directed.

S&F vitreous china wash basin,pedestal pattern size 550x400mm white, excluding taps, waste, chain and plug and porcelain stopper but including brackets.complete all as specified.

S&F for pillar taps of 15 mm bore, fancy type with capstan head, chromium plated, screwed down high pressure, with long screwed shanks and fly nuts, screwed for iron pipe & fixed.

S&F of waste pipe of 32mm dia PVC pipe for WHB with long screwed shanks and fly nut flange end beddedd in red lead cement and other end fixed

S&F soap dish any type fixed to plugs with chromium plated brass screws.

S&F soapdispensar of all fittings complete all as specified.

S&F Aluminium anodised tubular towel rail 20mm dia D Type 60cm long between flanges

S&F vitreous China one piece EWC wash down water closet pan ( padestal pattern Water Closet , white ) , with seat cover and twin flush fittings including connection to drain ( or outgoing pipe) , etc., and fixing of seat cover complete all as specified.

S&F in repair health Faucets with flexible tube 15mm dia for EWC including all connection complete and all as specified by Enr-in-Charge

S&F for grating square 150mmx150mm size of PTMT complete all as specified.

S&F PVC low level valveless, syphonic action type flushing cistern, low level, white, with inlet, ball valve, flaot and handle including brackets of 10 Ltr capacity.

S&F 15 mm dia tubes medium grade galvanised with all fitting and fixed complete to walls and ceiling or laid in floors ,complete all as specified.

Ditto but 20 mm dia of bore pipe ,complete all as specified.

M&L for cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) of 100mm dia

M&L for nahani trap with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) of 100mm dia

S & F of 110 mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joint laid in trenches or in floors complete all as specified and directed.

S & F of 110 mm bore PVC (SWR) bend any radius complete all as specified and directed.

S & F of 110 mm bore PVC (SWR) junction single, (Single ‘T’) equal or unequal complete all as specified and directed

M&L for Precast RCC 1:2:4 type B1 (20 mm graded aggregate) in cover slabs etc set in CM 1:4.complete all as specified.

M&L for RCC pipes Class NP-3, 150 mm dia, laid and jointed complete with collar in trenches on concrete bed and making joints and testing complete all as specified & directed.

M&L for cement concrete 1:4:8 type D-2 for concrete bed including packing under and haunching against the sides of pipes after they are laid and tested for 150mm bore pipe.

M&L for RCC hume pipe septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, vent shaft, connection etc complete for 10 users.

M&L for soakage wells excavation in any type of soil, foundation in PCC 1:3:6 walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of brick masonry in CM , RCC cover slab in M25/SFRC cover interconnecting pipes of RCC/DWC compelete filled with brick bats of size 1.2m dia x 1.5 depth effective depth.

Preparing new plastered or unplastered surfaces of walls by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots Washing, rubbing down and stopping of distempered and painted surfaces over a coat of putty applying one coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior weather proof paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm complete all as specified.

S&F PVC wall lining con-sisting of 5 mm thick insulating PVC wall panelling sheet inclusive of solvent cement and fixing at site complate as specification and drawing .

M&L preparing the surfaces on new surfaces applying two coat of distemper oil emulsion over a coat of 2 mm thick putty,complete all as specified.

M&L preparation wooden of surfaces of any description , not otherwise described over 10 cm width or girth two coat of synthetic enamel paint over one coat of pink primer complete

M&L cement concrete 75 mm thick type C1 1:3:6 ( 40 mm graged stone aggregate as in plinth protection ) all as specified and directed

M&L for surface dressing n exc 15cm deep in soft/loose soil complete all as specified and directed

Excavating in post holes (or similar holes) each n.exc. 0.5 cum, getting out in hard dense soil returning, filling in and ramming earth or broken rubble mixed with earth around, in layers, n.exc. 25cm, watering and removing surplus soil to a distance n.exc. 50m and making good surface

M&L cement concrete type D-2 1:4:8 (40mm graded aggregate) as in foundation filling and mass concrete

S&F rolled trusses ( framed ), trussed purlins, crane and fastening feavy bracket framing ( bem, tee,anglechannel or flat sections) including distance pieces cleates etc confirming to Fe 410-W(Gde E-250 Quality)

M & L for preparation of new or previously un treated steel and iron surfaces over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide or zinc chrome on steel and iron surfaces all as specified and directed.

S&F pre painted galvalume aluminium zinc coated GI based corrugated steel sheet 0.50 mm thick of an colour having a tensile strength of 550 Mpa as in roof covering / clading to wall fixed with self tapping screws as specified(AZ 150)

S&F MS wind tie for roof including securing bolte etc complete all as specified.

M&L for hardcore of guage exc. 63 mm but n,exc 100 mm thick deposited spread and levelled in layers n exc 15 mm thick watered and rolled /rammedto a true surfaces

M&L for 100 mm thick cement concrete type D-2 1:4:8 (40mm graded stone aggregate) as in sub base of floor complete all as specified.

M&L for reinforceent cement concrete M-25 (20mm graded stone aggregate) design mix as lintel beam etc complete all as specified.

M&L for mild steel TMT bars 10mm dia and over , cut to lenght , bend to shape required including cranking bending sprially for hooping columns, hooking ends and binding with and including mild steel wire ( annealed ) not les than 0.9mm dia or securing with clips quality

Ditto as above item no but 6mm to 8mm dia as in stirrups complete all as specified.

M&L for use & waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc. also splayes between floors and beams in rough finished surface of concrete complete all as specified and directed.

S&F mild steel posts and struts in fencing , flat iron as in wind ties for roof including securing bolts, including cutting tops to shape as directed, drilling holes, notching for wire etc, flat iron fillets for securing wire mesh and similar work confirming to Fe-290 Gde E-165

Supply only Chain link MS galvanisd fencing of any dia wire, any mesh size made into mattresses laped wired laid in position all as specified and as directed and approved by Engr in Charge.(Note :-Weight decided by BOO)

Fixing only chain link fencing including line wires, any mesh size and type to any type of standards rails straining bolts etc including provision of binding wire any size or type weight n exc 4 Kg per Sqm metre as approved by Engineer- in-Charge

M & L for 10 mm dia round bars ( FE - 410 W Gde E 250 uality A or Fe 250 ( Gde E-165) and over deformed or twisted bars cut to length bent to shape reqd incl cranking, bending, hooking ends and binding with mild steel wire (anealed) not less than 0.9 mm dia as in line bars for securing chain link fence etc.,

S&F Mild steel bolts, purpose made, with hexagonal or square head one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square not, exc 30cm long (diameter of neck in mm exc 12 not exc 20).

S&F rotational moulded Polyethelene (HDPE) triple layer water tanks, cylindrical & vertical type 500 Litres capacity hoisted and fixed in position including float valve and provision of 20mm/15mm dia. spouts for connecting inlet, outlet, over flow and washout pipes.

M&L machine cut kota stone slab flooring 20-25mm thick over and including cement screed based 15 mm thick in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl cutting polishing and rubbing complete all as specified & directed.

M&L for 75mm thick PCC 1:4:8 type D-2 using 40mm graded aggragate as in foundation, filling & mass concrete complete all as specified & directed.

M&L for coloured chequered cement concrete tiles 300X300X25 mm thick with pigment jointed and pointed in neat cement slurry and including 20 mm thick screed bed in cm 1:6 complete all as specified & directed.

Material & labour point wiring with 1.5 sqmm nominal cross sectional area, single core, 1100 Volts grade, stranded, FRLS PVC insulated, unsheathed copper conductor cable in and including PVC concealed conduit of 25 mm dia or higher, medium grade complete with and including all PVC conduit accessories/fittings, brass screws, washers etc, Sunk Zinc coated pressed steel terminal boxes including all cutting/chases etc in walls, making good to walls, ceiling etc including two coats of white/colour washing/ distempering etc to the disturbed surfaces to match the existing with 3 mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated copper stranded conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed for the followings.

One light point or one fan point or bell point controlled by one switch or bell push

One 3 pin, 05 /06 Amps socket outlet point on independent board controlled by one , one way 05/06 Amps switch

One 3 Pin, 05 /06 Amps socket outlet point on same board controlled by one, one way 5/06 Amps switch

All as per serial item No 80.00 here in before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 15 /16 Amps socket outlet point on independent board with and including continuous earth wire of size 2.5 Sqmm nominal cross sectional area, FRLS single core, PVC insulated copper conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed

Supply & fixing switch piano flush type, 05/06 Amps single pole , one way 240 volts complete all as specified & directed .

Supply & fixing switch piano flush type, 15 /16 Amps single ploe, one way 240 volts complete all as specified & directed .

Supply & fixing socket outlet 3 pin, 05/06 Amps (2 -in-1 Multipurpose) flush type 240 volts complete all as specified & directed.

Supply & fixing of socket outlet 3 pin, 15/16 Amps (2 -in-1 Multipurpose) flush type 240 volts complete all as specified & directed.

Supply & fixing of bell push, flush type 05/06 Amps, 240 volts complete all as specified & directed .

Supply and fixing Bell Multi Music type AC, 230 volts, single pole,compete all as specified & directed.

Supply & fixing of ceiling rose surface bakelite 65x 50mm three terminals complete all as specified & directed.

Supply & fixing MCB , SP, AC, 240 volts of 05 to 32 Amps capacity 10KA, 'B' series and making connections with suitable size of copper lugs complete all as specified & directed.

Supply & fixing MCB, SPN, AC, 240 volts of 40 Amps capacity 10KA, 'B' series and making connections with suitable size of copper lugs complete all as specified & directed.

Supply & fixing MCB, SPN, AC, 240 volts of 63 Amps capacity 10KA, 'B' series and making connections with suitable size of copper lugs complete all as specified & directed.

Supply & fixing MCB DB Box 8 way 200 Amps capacity, 240 volts, Double door, SPN and flush to wall including all cutting etc on wall and making good the disturbed surfaces with painting the wall to match the existing all as specified & directed.

Supply & fixing MCB DB Box 4 way 200 Amps capacity, 240 volts, Double door, SPN and flush to wall including all cutting etc on wall and making good the disturbed surfaces with painting the wall to match the existing all as specified & directed.

Supply & fixing Sheet Metal Enclosures vertical TPN distribution board with provision for & including 100 Amp MCCB TPN as incomer with necessary internal wiring, MCBs as outgoing , 4 way, 415 Volt, Double door for housing MCB's/Isolators and flush to wall including all cutting etc on wall and making good the disturbed surfaces with painting the wall to match the existing all as specified & directed.

Supply & fixing Sheet Metal Enclosures with socket plug top and MCBs single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of 20 Amps capacity 240 volts 'B' series 10KA and making connections complete all as specified & directed.

Earthing complete with galvanised MS earth plate of size 600 x 600 x 6mm thick burried directly in ground not less than 2.25 Mtr below ground level, earth plate paced on all side with charcoal mixed with salt to a thickness of 150 mm in layers, connected by GI earth wire of size 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion (GI earth strip will be protected by using 40mm bore GI pipe (light grade) from test point to main board. The earthing includes PCC pit chamber, RCC pit cover and frame, watering pipe 20mm bore, funnel with wire mess with necessary earth work including disposal of surplus soil to a distance not less than 50 Mtr etc complete all as specified and shown in electrical plate No 3 of SSR Part-I.

Supply & Fixing LED Bulb 9 watt 240 volt

S&F 10 watts Light emitting Diode (LED) tube light fitting wall mounting , indoor decorative aluminium extruded T5 LED battens, Integrated type, AC 230-240V, 50 hz, with PMMA/PC diffuser, 4' long, easy to install Efficacy : 100 lumen/watt, making connections with and including 23/.0076 flexible cord of required length from ceiling rose to connector complete all as specified and directed.

S&F 20 watts Light emitting Diode (LED) tube light fitting wall mounting , indoor decorative aluminium extruded T5 LED battens, Integrated type, AC 230-240V, 50 hz, with PMMA/PC diffuser, 4' long, easy to install Efficacy : 100 lumen/watt, making connections with and including 23/.0076 flexible cord of required length from ceiling rose to connector complete all as specified and directed.

S & F Recess mounted economical LED panel light 2`X2` 36 watt with high quality diffuser for uniform light with 100lm/w housing of pressed aluminium sheeet with complete all as specified and directed.

Supply & fixing lamp holder (Angular/Straight ), insulated body, with back plate for batten fitting complete all as specified & directed

M & L for sub main wiring with 4 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, stranded, FRLS PVC insulated, unsheathed, copper conductor stranded cable with and including continuous earth wire of size 4 Sqmm nominal cross sectional area, single core , FRLS PVC insulated, copper conductor stranded cable drawing into and including rigid non metallic PVC conduit of 25 mm dia, medium grade with all conduit accessories/ fittings ,brass screws, washers etc and connected to common earth dolly including all cutting/ chases etc in wall, making good to walls etc including two coats of white/ colour washing/distempering etc to the disturbed surfaces to match the existing complete all as specified & directed.

M & L for sub main wiring with 6 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, stranded, FRLS PVC insulated, unsheathed, copper conductor stranded cable with and including continuous earth wire of size 6.0 Sqmm nominal cross sectional area, single core , FRLS PVC insulated, copper conductor stranded cable drawing into and including rigid non metallic PVC concealed conduit of 25 mm dia, medium grade with all conduit accessories/ fittings ,brass screws, washers etc and connected to common earth dolly including all cutting/ chases etc in wall, making good to walls etc including two coats of white/ colour washing/distempering etc to the disturbed surfaces to match the existing complete all as specified & directed.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V,size 1400mm with Min Air delivery 245 CFM and service value 6.0 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers including making holes and connections with suitable size of copper wire and making good surfaces complete all as specified.

Supply and fixing LED street light fitting 45 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

Supply & Laying jointing, testing and commissioning LT XLPE, 25 Sqmm, 4 core. PVC insulated, PVC sheathed armoured LT 1100 volt grades heavy duty with aluminium stranded conductor through pipes, induct, on poles, in trenches etc complete all as specified and directed.

Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundations etc. or for shafts, well cess pits, manholes,pier holes, laying of pipe and cables etc. but not exceeding 10 sqm on plan including dressing/trimming sides and levelling/grading & ramming bottom of excavation and getting out in soft/loose soil complete all as specified.

Returning ,filling in , including spreading , levelling , watering and well ramming in layer not exceeding 25 cm thick in soft/loose soil complete all as specified.

Removing excavated material ( soils) not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified.

M&L burnt clay fly ash old size bricks, straight or curved on plan , laid flat with width equal to length of brick , laid dry over electric cable for protection all as specified.

Material and labour for river sand, unwashed and screened dry ) for cushioning to under ground cable in trenches below and around under ground cable including spreading and levelling complete as specified and directed . (Note:Punned thickness shall be measured for the purpose of payment)

SA construction co. (BID ID -3115933)

Manglam Engineers and Construction Co (BID ID -3126897)

SHAKTI CONSTRUCTION CO (BID ID -3107735)

SHRUTKIRTI ENGINEERS AND CONSULTANTS (BID ID -3109809)