Loading
Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹43.8 L
EMD Value
₹87,520
Closing Date
21 Oct 2026, 6:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
GE AF OJHAR
GE AF OJHAR AIR FORCE STN OJHAR DIST NASHIK 422221
PROVISION OF WORKS SERVICES FOR LIVING -IN- AIRMEN BILLETS AT 11 BRD AF STN OJHAR
2026_MES_791955_1
8482/E8
Open Tender
Miscellaneous Works
Item Rate
180 days
GE AF OJHAR
As per tender doucments
8 documents required · 8 mandatory
₹500
GE AF OJHAR
₹87,520
Yes
30 Sept 2026
30 Sept 2026
23 Oct 2026
30 Sept 2026
21 Oct 2026
16 Oct 2026
30 Sept 2026 - 15 Oct 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | B&R Works : Surface excavation averaging 15cm deep and n.exc 30cm deep and getting out in soft / loose complete all as specified and directed | 102.6 | Square Metre | - | - |
| 2 | Excavation in trenches and not exe. 1.5 m wide and not exe. 1.5 m in depth for foundation of drain, man hole , laying of UG cables etc. not exe. 10 Sq. m on plan and not exe. 1.5 m depth and getting out in hard/ dense soil complete all as specified and directed. | 46.65 | Cubic Metre | - | - |
| 3 | M & L for PCC 1 :4 : 8 type D2 using 40 mm graded crushed stone aggregate as in foundation filling mass concrete complete all as specified and directed. | 0.9 | Cubic Metre | - | - |
| 4 | S&F 10 mm dia and over TMT bars cut to length bent to shape required cranking including bending , hooking ends etc and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed. | 2,684.87 | Kilo Gram | - | - |
| 5 | S&F 6 to 8 mm dia and over TMT bars cut to length bent to shape required cranking including bending , hooking ends etc and binding with mild steel wire (annealed) not less than 0.9 mm dia as in striupps , spacers & binders etc complete all as specified and directed. | 842.93 | Kilo Gram | - | - |
| 6 | Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work, vertical or to batter for rough finished flat surfaces of concrete | 6.24 | Square Metre | - | - |
| 7 | Formwork to sides of pillars, posts, struts, piers, columns and stanchions, square, rectangular or polygonal for rough finished flat surfaces of concrete | 52.81 | Square Metre | - | - |
| 8 | Formwork to sides and soffits of floor or roof beams, beam haunching, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for rough finished flat surfaces of concrete. | 90.3 | Square Metre | - | - |
| 9 | Form work to rough finished surface of sides and soffits of suspended slabs such as roof slabs, floor slabs, landings, chajjas and similar work; not exceeding 200mm thick (Horizontal or sloping) | 82.24 | Square Metre | - | - |
| 10 | M&L for reinforced cement concrete M-25 (Design mix) using 20mm graded crushed stone aggregate in foundation , footings , foundation beams , plinth beams , base of columns etc complete all as directed. | 2.03 | Cubic Metre | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.29 MB
BOQ_887933.xls
BOQ • 1.72 MB
TENDER8482.pdf
Tender Documents • 1.25 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .