Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹30.2 LAccepted-AOC KANAKALAPETA YANAM | L1 | Accepted-AOC Work Order Issued | |
| 2 | L2₹31.0 L+₹80,375 (2.66%)Rejected-Finance D NO 10 4 011 KANAKALAPETA YANAM 533464 | KONASEEMA | ANDHRA PRADESH | 533464 | L2 | Rejected-Finance Rejected | |
| 3 | L3₹41.9 L+₹11.7 L (38.8%)Rejected-Finance KANAKALAPETA YANAM | L3 | Rejected-Finance Rejected |
Tender Value
₹31.5 L
EMD Value
₹62,931
Closing Date
9 Feb 2024, 4:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
EE, PWD, Yanam
Chinta Street, PWD, Yanam
Development of infrastructure facilities for the Judiciary - Urgent amenities to Municipal Kalyanamandapam at Vishnalayam street, Yanam for conversion into Sub-Court, Yanam
2024_PWDC2_14966_1
136/EEY/2023-24
Open Tender
Civil Works
Item Rate
90 days
Yanam
Please refer Tender documents.
2 documents required · 2 mandatory
₹525
₹62,931
4 Mar 2024
30 Jan 2024
12 Feb 2024
30 Jan 2024
9 Feb 2024
30 Jan 2024
Amount
14.43 Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scrarches etc. complete.
13.48.1 Finishing with deluxe multi surface paint system for interiors and exteriors using primer as per manufacture's specification - Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of special primer applied @ 0.75 ltr / 10 sqm.
13.61.1 Painting with synthetic enamel paint of approved brand and manufacutre to give an even shade - Two or more coats on new work.
17.2.2 Providing and fixing white vitreous china pedestal type water closet (European type W.C.pan) with seat and lid, 10 litre low level white P.V.C. flusing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS: 7231,with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required - W.C. pan with ISI marked black solid plastic seat and lid.
17.78.1 Providing and fixing CP brass health faucet of approved quality - 15 mm nominal bore.
12.41.2 Providing and fixing on wall face unplasticised rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10mm gap for thermal expansion, (i) Single socketed pipes - 110 mm diameter.
12.42.5.2 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10mm gap for thermal expansion - bend 87.5 degree - 110 mm bend
12.42.6.2 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10mm gap for thermal expansion - shoe (plain) - 110mm shoe.
12.43.2 Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised- PVC rain water pipes by means of 50x50x50mm hard wood plugs , screwed with M.S. screws of required length, including cutting brickwork and fixing in cement mortar 1:4 ( 1 cement : 4 coarse sand) and making good the wall etc., omplete - 110mm.
21.1.1.1 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / appropriate Z sections and other sections of approved make conforming to IS:733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions , i.e at top, bottom and sides with required EPDM rubber / neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling , C.P.brass / stainless steel screws , all complete as per architectural drawings (Glazing, paneling and dash fasteners to be paid for separately) - for fixed portion - anodised aluminium (anodised transparent or dyed to required shade according to IS:1868, Minimum anodic coating of grade AC 15).
21.1.2.1 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / appropriate Z sections and other sections of approved make conforming to IS:733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions , i.e at top, bottom and sides with required EPDM rubber / neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing /paneling , C.P.brass / stainless steel screws, all complete as per architectural drawings (Glazing, paneling and dash fasteners to be paid for separately) - for shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neopren gasket required (fittings shall be paid for separately) - Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC15).
21.22 Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS:12823 grade I type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings- Pre- laminated particle board with decorative lamination on both sides.
21.3.1 Providing and fixing glazing in aluminium door, window , ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings ( cost of aluminium snap beading shall be paid in basic item) - with float glass panes of 4.0 mm thickness.
12.45.3 Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S.sheets and galvanized with zinc coating of 120 gms / sqm (both side inclusive) as per IS:277 and consisting of angle cleats of size 25mm wide x1.6mm thick with flanges of 27mm and 37mm , at 1200 mm cenetre to centre, one flange fixed to the ceiling with dash fastener 12.5mm dia x50mm long with 6mm dia bolts ,other flange of cleat fixed to the angle hangers of 25x10x0.50mm of required length with nuts and bolts of required size and other end of angle hanger fixed with intermediate G.I channels 45x15x0.9mm running at the spacing of 1200 mm centre to centre , to which the ceiling section 0.5mm thick bottom wedge of having clips of 10.5mm, at 450mm centre to centre ,shall be fixed in a direction perpenticular to G.I.intermediate channel with connecting clips made out of 2.64mm dia x 230mm long G.I. wire at every junction, including fixing perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30mm long, the perimetre of ceiling fixed to wall/partition with the help of rawl plugs at 450mm centre , with 25mm long dry wall screws @ 230 mm interval , including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall ...
10.17 Providing and fixing M.S. fan clamp type I or II of 16mm dia M.S. bar, bent to shape with hooked ends in R.C.C.slabs or beams during laying , including painting the exposed portion of loop, all as per standard design complete.
1.24.4 Supplying and fixing following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required - 3 pin 5/6 A socket outlet.
1.24.5 Supplying and fixing following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required - 6 pin 15/16 A socket outlet.
1.28.3 Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc.as required - 4 module
1.28.5 Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc.as required - 8 modules.
1.28.6 Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc.as required - 12 modules.
2.14.1 Supplying and fixing following rating, double pole , (single phase and neutral), 240V , residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections , testing and commissioning etc as required - 25 A
2.4.1 Supplying and fixing following way horizontal type three pole and neutral , sheet steel , MCB distribution board , 415 V, on surface / recess , complete with tinned copper bus bar , neutral bus bar , earth bar , din bar, Interconnections , powder painted including earthing etc. as required (but without MCB / RCCB / Isolator) 4way (4+12) , double door.
1.21.2 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required - 25mm.
Basic Code No.1101 Supplying and drawing 1.5sq.mm ISI maked, FRLS PVC insulated, single core copper conductor cable (multistrand).
Basic Code No.1102 Supplying and fixing 2.5sq.mm ISI maked, FRLS PVC insulated, single core copper conductor cable (multistrand).
Basic Code No.1103 Supplying and fixing 4.0sq.mm ISI maked, FRLS PVC insulated, single core copper conductor cable (multistrand).
Basic Code No.1104 Supplying and fixing 6.0sq.mm ISI maked, FRLS PVC insulated, single core copper conductor cable (multistrand).
Basic Code No. 3051.O 1 x 40W box type single tube light fitting with copper choke & starter without tube. Make: Philips/Bajaj etc complete as directed by the Engineer in charge.
Basic Code No. 3127.O Supplying and fixing 1200mm sweep double ball bearing ceiling fan Make: Almonard/Usha.
Basic Code No.1408 Supply and fixing Stepped type Modular Fan regulator (2 module) etc complete as directed by the Engineer in charge.
Basic Code No.1208 Supply and fixing 80W LED Focus Light Fitting (Philips/Havells) etc complete as directed by the Engineer in charge.
Basic Code No.1402 Supply and fixing S.P. 5/6 A, one way modular switch, ISI marked etc complete as directed by the Engineer in charge.
Basic Code No.1404 Supply and fixing S.P. 15/16 A, one way modular switch, ISI marked etc complete as directed by the Engineer in charge.
Basic Code No.1715 Supply and fixing 63 A, 4 pole isolator etc complete as directed by the Engineer in charge.
Basic Code No.1216 Supply and fixing 20 mm junction box, one way etc complete as directed by the Engineer in charge
1.33 Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box /wooden block including connection etc as required.
Basic Code No. 2826 Supply an fixing 40 mm dia G.I.pipe (medium class) etc complete as directed by the Engineer in charge.
Basic Code No. 2904 Supply and fixing 8 SWG copper wire (4.0 mm dia) etc complete as directed by the Engineer in charge.
E.387 Supplying and laying 32-100A HRC fuselink etc complete as directed by the Engineer in charge.
NON-PSR Supply and fixing of 20-24W LED tube light fitting Make: Philips/ Havells/ wipro.
Basic Code No.3286 Supplying and fixing 2.0 Ton Split Type AC unit with all accessories including stabilizer (3 star) Panasonic/ Dikin.
Davuluri Satyanarayana
sekhar
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .