Special repair to building No. IAS-4 with paved area at exam hall of F civil, provn of aluminium windows and ventilators to bldg No. 169 (single offrs accn) and improvement to bathrooms at bldg No. P-571 at CME

Amount

Dismantling of single layer Mangalore Pattern roof tile laid dry complete all as specified and directed

S&F Framed work such as roof trusses (framed), trussed purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc Fe-410-W (Gde E-250) Quality A in repairs complete all as specified and directed.,

M & L for preparation of new or previously untreated surfaces of iron of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chromeprimer complete all as specified and directed

S & F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc. complete all as specified and directed.

S & F pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as in ridges, hips, valley, gutters etc. complete all as specified and directed.

Dismantlingof ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness complete all as specified and directed.

M &L for false ceiling with 4 mm thick designer 'E' board fixed on GI grid work with powder coated finish on exposed surface of size 0.60 x 0.60 m consisting of GI angle supported on wall of size 24 mm x 28 mm x 0.7 mm main tee of size 24 mm x 38 mm x 0.7 mm cross tee of size 24 mm x 28 mm x 0.7 mm using purpose made members interlocking to made to shape at 1200 mm c/c fixed with 3mm dia. GI wire suspender and making holes etc. all as directed including two coats of white wash on ceiling after preparation of surfaces and as per manufacturer instruction make of grid work : Armstrong/ swastik/ Techno Grid and 'E' board Gypsum or equivalent approved. including taking down old ceiling etc complete all as specified and directed.

Dismantling water tanks and removing to store capacity exc 500 & n.exc 1000 ltrs complete all as specified and directed.

S&F 1000 ltr. Capacity rotational moulded polyethylene water storage tanks cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed

S & F 20mm bore dia ball brass valves, high pressure with polythene float and flynut complete screwed for iron pipe or brass ferrule complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Demolition of cement concrete (unreinforced ) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) all as specified and directed.

M&L For 25 mm thick, plain cement concrete type B-1, 1:2:4 (20mm graded stone aggregate) as in sub base etc complete all as specified and as directed.

M&L for screed bed or bedding layer of mortar in cement mortar 1:6, 15 mm thick for laying floor/ wall finishes complete all as specified and directed

M&L machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and pointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

S & F vitrified ceramic tiles light shade,10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc laid over 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed.

S & F non- skid Ceramic coloured tiles tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc. laid over 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed.

S & F vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc fixed on 10mm thick cement mortar 1:4 backing coat complete all as specified and directed

S & F for glazed ceramic coloured tiles in vertical surface 350mmx250mmx7mm /450mmx350mmx7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over backing coat 10mm thick cement mortar 1:4 complete all as specified and directed,

Dismantling stone slab and tiles of any description and thickness as in floor including cement mortar bedding and rubbish off the premisses complete all as specified and directed.

M& L For 20 mm thick, granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite etc complete all as specified and as directed.

Taking up or down 15mm bore steel water tubing & connections, including cleaning for refixing or offering credit as per schedule of credit complete all as specified and as directed.

All as per item No. 22 above, herein before but 20mm bore

S&F 15mm bore medium grade galvanised steel water tubing with all fitting & fixed complete to walls or ceiling or laid in floors all as specifeid and directed.

S&F 20mm bore medium grade galvanised steel water tubing with all fitting & fixed complete to walls or ceiling or laid in floors all as specified and directed.

Refixing 15mm bore old steel water tubing & connection in new or old position of wall, ceiling, floor etc all as specified and directed Note : Serviceable tubing obtained from sl item No. 22 shall be re-used in this item

All as per item No. 26 above, herein before but 20mm bore. Note : Serviceable tubing obtained from sl item No. 23 shall be re-used in this item

S&F in repair vitreous china wash basin, white, flat back, size 630x450mm excluding taps, waste chain and plug and porcelain stopper but including brackets, waste coupling complete all as specified and directed.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including matching colour plastic seat cover closet pattern with flat bottom and aluminium hinging device complete all as specified and directed Note :- Flushing cistern shall be measured and paid separately under relevant item

S&F in repair 10 ltr capacity PVC valveless, syphonic action type flushing cistern, low level, white, with inlet ball valve, float and handle including bracket and 32mm dia flush pipe of polyethylene of low or high density for low level cistern complete all as specified and directed.

S&F in repair brass chromimum plated two way bib cock fancy type, 15mm bore (min Wt. 550 grams) of approved make by EIC/ GE etc.complete all as specified and as directed.

S & F for brass chromium plated, 15 mm bore health faucet, ( flexy type) 1.00 mtr. long of approved make by EIC/GE etc. complete all as specified and as directed.

S&F in repair 15 mm dia pillar taps, cast copper alloy, with capstan heads, chromium plated fancy type , screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long shanks and flynuts, screwed for iron pipe complete all as specified and directed.

S&F PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repair 15mm fancy type bib tap, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed

S&F 25mm bore, Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule complete all as specified and as directed.

S&F 25mm bore, Gun-metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete as specified and as directed.

S &F Grating square 100 mm size (Minimum weight 100gms) complete all as specified and as directed

S & F vitreous China urinals, half stall urinal (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets flush pipe, grating and union for discharge pipe. inclusive of fixing supply pipe to flushing cistern, trap and waste pipe in repairs complete all as specified and as directed

S&F in repair 15mm dia stop valve chromium plated fancy type screwed down high pressure with crutch or butterfly handle screwed both end for iron pipe or for union complete all as specified and directed.

M&L 40mm thick cement concrete type B-1, 1:2:4 (20mm graded stone aggregate) as in sunkun floor complete all as specified and directed.

M&L 15mm thick plastering in CM 1:3 along the wall of toilet and bath mixed with 3 % WPC and finished even and smooth without using extra cement complete all as specified and directed.

Supplied only WPC all as specified and as directed

S&F in repair 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

All as per item No. 44 above, but 110mm complete all as specified and directed.

S&F in repair 75mm PVC (SWR) bend any radius complete all as specified and directed

All as per item No. 46 above, but 110mm dia complete all as specified and directed.

S&F in repair 75mm PVC (SWR) junction single (single T) equal or unequal complete all as specified and directed.

All as per item No. 48 above, but 110mm bore of pipe complete all as specified and directed.

M&L in repair 75mm PVC (SWR) floor trap with grating including jointing with solvent cement complete all as specified and directed.

All as per item No. 50 above, but 110mm complete all as specified and directed.

S&F in repair 75mm PVC (SWR) vent cowl complete all as specified and directed.

All as per item No. 52 above, but 110mm complete all as specified and directed.

S&F in repair Brass chromium plated tubular towel rail, 20mm dia, D type 60cm long between flanges complete all as specified and directed.

S&F for sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with stain steel bracket guard and railing 60 cm long etc. complete all as specified and as directed.

S& F in repair Soap dish holder complete as specified and directed by Engr-in-Charge. (make : Jaquar)

S&F Toilet paper holder, vitreous China, box type all as specified and as directed

Taking down chowkats or frames with shutter (without taking off shutters from the frames) not exc 1.5 sqm each and removing from site complete all as specified and directed.

All as per item No. 59 above, but exc 1.5 sqm and n.exc. 4 sqm complete all as specified and directed.

S&F 2nd class hard wood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid rounded or chamferred, put together with glue pinned at joints all as specified and directed

S&F 2nd class hard wood 35 mm thick factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze,etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass,etc, size of members of shutters as spfd in SSR Part-1, Section 8, clause 8.24 (a) complete all as specified and as directed.

M&L for preparing new surface of wood of any decription, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S & F mild steel works as in bands straps, hold fasts etc, conforming to IS-2062-2006 (Fe-290), embedded portion duly painted with bituminous paint and sanded, complete all as specified and directed.

S & F aluminium powder coated ventilators partly fix and partly lowered of aluminium section designed DG-2762 (40 mm x 32 mm x1.5 mm thick) (wt 0.668 kg/mtr) frame and DG-2763 and middle section of designed DG-2763 (40 mm x 32 mm x 1.5 mm thick) (wt 0.654 kg/mtr), middle section DG-2546 (17.27 mm x 17.15 mm x 1.22 mm thick) (wt 0.124 kg/mtr) including 5 mm thick pinheaded figured glass louvers with blades of 100 mm heavy duty including with aluminium lever handle fixed panel shall be provided with 5 mm thick pin headed figured glass including all necessary rubber packing, anodized aluminium snap beading fixed with minimum 6 Nos of suitable size galvanised screws with PVC plug etc including taking down old ventilator etc. complete all as specified and directed.

S & F solid PVC door frame of size 50mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube etc all as specified and directed.

S & F factory made solid PVC moulded door shutter, 30 mm thick 2mm thick 3D wood grain Moulded PVC sheet polyurethane painted on the front face & 2mm plain colour PVC sheet on back face complete all as specified and as directed.

S & F Mild steel butt hinges medium weight , cold rolled, 100mm, ISI marked, complete all as specified and directed.

M&L barrel tower bolts stove enamelled black of size 200 mm complete all as specified and directed.

M&L barrel tower bolts stove enamelled black of size 150 mm complete all as specified and directed.

S&F 125mm long aluminium anodised handles or extruded section complete all as specified and directed.

S&F 150 mm long aluminium anodised handles or extruded section complete all as specified and directed.

S&F 300mm long Aluninium alloy, anodised, sliding door bolt with hasp, staple, (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.

S&F Mild steel 300mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and width of aperture 1.18mm & fixed with tinned tacks or galvanised wire staples complete all as specified and as directed.

Demolition of brick or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed.

M&L precast solid block masonry of block 1:3:6 type C-1 wall exceeding 10 cm in width and built in cement mortar 1:6 complete all as specified and directed.

M&L 15mm thick plastering on concrete surface in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed.

Racking out joints/pointing to random rubble masonry, polygonal rubble uncoursed or brought upto course complete all as specified and directed.

M&L raised pointing in CM 1:4 to random or polygonal rubble, uncoursed or brought upto courses complete all as sepcified and directed

Taking down cement plaster on brick or stone walls or concrete surface etc including raking out joints, hacking for key scrubbing down with water all as specified and directed.

M&L rendering 5mm thick on concrete surfaces in CM 1:3 on ceiling, finished even and smooth with sagol all as specified and directed.

M&L rendering 15mm thick on stone masonry surfaces in CM 1:6 finished even and smooth with sagol over and including dubbing out average 10mm thick on irregular face of walls in CM 1:6 complete all as specified and directed.

M&L preparing newly plastered surfaces of wall and applying complete wall with POP/Birla putty and making smooth surfaces and applying two coats of Oil bound distemper over a coat of primer all as specified and directed.

M&L for preparation of newly plastered surfaces and applying three coats of white wash on ceiling all as specified and directed.

M&L preparation of newly plastered or unplastered surfaces on wall surfaces and applying two coats of cement base paint complete all as specified and directed.

M&L PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) in lintels upto 1.5 m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded for chamfered angles and throating, complete including use and waste of necessary form work all as specified and directed.

M&L complete removal of existing treatment and applying 3mm thick Birla wall care putty and applying two coat of Oil bound distemper white or tinned over one coat of primer on walls, etc all as specified and directed.

All as per item No. 88 above, but two coats of cement base paint without wall care puttycomplete all as specified and directed.

All as per item No. 88 above, but two coats of white wash on ceiling complete all as sepcified and directed.

S&F in repairs 19/20mm dia MS pipe powder coated of approved colour as in decorative type curtain rods including brackets for fixing curtain rod all as specified and directed.

S&F in repairs brackets, Side end balls of approved decorative type suitable for fixing curtain rods of 19/20mm dia pipe incl fixing screws, drilling etc as per sample approved by Engr-in-charge all as specified and as directed.

M&L cement concrete 1:3:6 type C-2 (40mm graded stone aggregate) as in floors plinth protection, path etc 75mm thick smooth finished surface without using extra cement complete including use and waste of necessary form work all as specified and directed.

Chipping off loose concrete/plaster upto sound stratum of RCC member such as slab, chajjas, columns, beams and clean the surface with wire brush, washing down with water using water jet including necessary scaffolding & propping to support the structural members where work is to be executed and removing debries to a distance exc 250 metre but n. exc 500 metre

M & L for providing and applying rust inhibition coat system (in two coats) as per manufacturer's instructions to exposed reinforcement after cleaning and removing scales and rust complete all as specified and directed.

M & L for providing and applying a bond coat (epoxy based bonding materials) to all exposed concrete surfaces all as per the manufacturer's instructions all as specified and directed.

M & L for providing and appying latex polymer modified cement mortar in specified composition system [i.e. cement 400 parts by weight, quartz sand 1600 parts by weight, polymer 60 parts by weight, water 120 parts by weight] to RCC surfaces all as per the manufacturer's instructions and as directed (Note : Thickness of plaster/ filling varies from 15mm to 25mm)

M&L 75 mm PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base complete all as specified and directed

Supply only Fine aggregate (sand) for sand cushioning of interlocking paver block all as specified and directed.

M & L Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size conforming to IS 15658-2006 of 60mm thickness M-35 grade with glossy finish colour shade complete all as specified and directed.

S&F Figured glass, pin headed 4 mm thick in squares n. exc. 0.50 sqm in each pane and glazing with oil putty after hacking out old broken glass panes all as specified and directed.

All as per item No.101 above, but exc 0.5 sqm in each pane

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples including wooden beading all as specified and directed.

S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples including wooden beading all as specified and directed.

S & F powder coated Aluminium sliding windows three track with two glass shutters using 5 mm thick glass tinted Modi guard and one shutter with stainless steel wire gauge wire cloth 0.31mm nominal dia of wire and width of aperture 1.61mm, using Aluminium powder coated sect, aluminium cleat, PVC track, bearing, handle lock rubber beading, etc complete all as specified and as directed.

Note Size of aluminum sections are as under :- (i) Three track top & vertical – Jindal main – 2010 Section No 20621. (ii) Three track bottom - Jindal main – 2010 Section No 20620. (iii) Shutter vertical section - Jindal main – 2010 Section No 20606. (iv) Shutter top & bottom - Jindal main – 2010 Section No 20604 (v) Shutter vertical middle (interlock) - Jindal main – 2010 Section No 20605.

Taking down shutters only of size exc 1.00 Sqm but not exceeding 4.00 Sqm all as specified and directed.

M&L joint free Non Skid glazed ceramic tiles (coloured) 7 to 8 mm thick (square/rectangular) area of each tiles exc 0.11 Sqm but n.exc 0.18 Sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including provision of screed bed 15mm thick in CM (1:6) complete all as specified and directed.

Cutting chase, pinning in making good to facings where required & pointing in cement mortar1:3 to ends etc or edges of landings, steps cills,sunshades, shelves,lintels,etc and cutting chasesfor concealed water tubing and making good,cutting n.exc. 10cm girth in brick walls complete all as specified and as directed.

M&L for CP brass bib tap 15mm bore with wall flange (make - Jaquar Code No. CON - 047KN) all as specified and directed.

S & F under counter wash hand basin vitreous china coloured including CI bracket, 15mm dia polythene connection, 32mm dia chromium plated (CP) waste coupling chain and plug waste fitting union and 32mm dia PVC waste pipe 90cm long, all necessary inlet outlet connections complete all as specified and directed. Make : Hindware Cat No. 10065 or equivalent model in Cera /Parryware/ Neycer as approved by GE.

M & L machine cut cuddappah stone slab 20-25mm thick over cement mortar base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specfied and directed.

S & F wall mount installation type, brass CP hand shower (Health Faucet) 15 mm bore with 1 metre long easy flex tube in chrome finish & wall hook including taking down old u/s one complete all as specified and directed. (Make: - Jaquar Cat No. ALD-563 or equivalent model in Marc/ ESS-ESS as approved by GE.

S&F in repair brass CP pillar tap long neck with 450mm long braided hose chrome finish complete all as specified and directed. Make - Jaquar Cat No.Code No DRC-37001 or equivalent approved make indicated in list of makes in tender.

S&F in repair 15mm dia concealed stop valve chromium fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified and directed.

S & F in repairs PVC (SWR) branch pieces, single (single 'Y') equal or unequal, 110 mm bore provided with access door complete all as specified and directed

S & F in repairs PVC (SWR) branch pieces, single (single Y) equal or unequal, 75 mm bore, provided with access door complete all as specified and directed

S & F in repair 15 mm bore bib tap, 2 in 1, brass chromium plated with wall flange, fancy type with long shank and crutch handle, screwed down, screwed for iron pipe complete all as specified. Make : Hindware (Cat No : F200004FT) or equivalent approved make indicated in list of makes in tender complete all specified and directed.

M&L for complete scraping down of old decorative surfaces of ceiling with steel wire brushes of smoke spots, moulds, moss efflorescent salts including filling of spots with POP/Birla putty and making smooth surfaces over 3 mm thick birla wall care putty and applying two coats of Luster over a coat of primer all as specified and directed

M&L for complete scraping down of old decorative surface/ new surfaces of walls with steel wire brushes of smoke spots, moulds, moss efflorescent salts including filling of spots with POP/Birla putty and making smooth surfaces over 3 mm thick birla wall care putty and applying two coats of Luster over a coat of primer all as specified and directed

S & F stainless steel liquid soap dispenser with glass bottle complete fixed to wall complete including taking down old u/s one complete all as specified and directed. Make:- Cera Code No. F-5007111) or equivalent approved make indicated in list of makes in tender.

S & F stainless steel soap dish holder complete fixed to wall including taking down old u/s one complete all as specified and as directed. Make:- Cera Code No. F-5006106 or equivalent approved make indicated in list of makes in tender.

S & F stainless steel toilet paper roll holder with flap complete including taking down old u/s one complete all as specified. Make- Cera Code No. F5006110 or equivalent approved make indicated in list of makes in tender.

S & F Glass Shelf 600mm long complete including taking down old u/s one complete all as specified. Make:- Cera Code No. F5005301 or equivalent approved make indicated in list of makes in tender.

S& fix factory made plain framed panelled shutters 35mm thick of 2nd class hard wood (any number of panels) with panels of timber flat on both sides feather edges or panel of 9mm BWP commercial ply over 12mm thick veneered particle board with commercial face veneers fixed to chowkhat . The size of rail and stile as per IS : 1003 (Part-1), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (stile) consisting of frame made out of mild steel tubes for top and bottom rails, mild steel frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rails & bottom rail, panelling of plain colour PVC sheet to be fitted in the mild steel frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement and fixing in the frame at site as per specifications and drawings, complete all as specified and directed.

S & F Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 .

S&F 200 mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and directed.

S&F 300 mm Mild steel sliding door bolts,plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed all as specified and directed.

S&F in 150mm dia double legged door stopper of aluminium alloy with rubber complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light, fan, bell, socket or power) complete including fixture and fittings such as switches, ceiling rose, pendents, regulators, sockets, light fittings etc removing materials to store for keeping in safe custody or for taking credit and making good distrubed surfaces of walls, floors, etc. credit for above items should be made as per conditions separately

M&L for point wiring for light/fan/Bell with FRLSH cable 1.5 sqmm PVC insulated (red for phase and black for neutral) unsheathed, multi stranded copper conductor 1100 volt grade in and incl not less than 2mm thick PVC casing/caping with all accessories and 1.50 sqmm green in colour PVC copper conductor cable for earth continuity connected to common earth dolly incl PVC box surface/ flush type with PVC sheet for mounting fittings such as switches, sockets, fan regulators, etc complete all as specified and directed & making good to disturbed surface of wall etc.

One light point controlled by one switch

One fan/exhaust fan point controlled by one switch and regulator

Socket outlet, three pin 5 Amps on the same board

Socket outlet, three pin, 5 Amp, independent

All as per item No . 132 above, but with 2.5 sqmm cable and 2.5 sqmm for earth continuity for multipin 15 amps socket outlet flush type on independent board.

S & F switch piano, flush type, single pole one way 5 amps complete all as specified and directed.

S & F switch piano, flush type, single pole one way 15 amps complete all as specified and directed.

S & F socket outlet 2 in 1, 5 pin, 5 amps flush type complete all as specified and directed.

S & F socket outlet 5 in 1, 5 pin, 15 amps flush type complete all as specified and directed.

S & F switch socket combination 5 in 1, 5 and 15 Amp flush type complete all as specified and directed.

S & F ceiling rose, PVC/polycarbonate isolated body, surface bakelite 65 x 50 mm, 3 terminal incl PVC square block complete all as specified and directed.

S & F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet complete all as specified and directed.

S&F surface and wall mounted LED batten (LED tube light fitting 20W) with polycarbonate housing & integrated electronic driver alongwith LED tube 20 watt and 02 No PVC square blocks incl taking down old UNSV fitting. Make:- Havells cat No LUMILINEBS20WLED830SPCWH or equivalent of Philips/Bajaj/shakti

S&F building security LED light fitting 25 Watt , energy saving and environmental friendly long life LED fitting made up of pressure die cast aluminium housing with acrylic cover as diffuser with IP 66 protection and impact resistance of IK 07 including suitable size bracket incl taking down old UNSV one. Make: - Havells cat No ENDURAPEARLSL25WLED757SASYTOPC or equivalent of Philips/Bajaj/shakti

S&F in replacement LED panel 2 feet x 2 feet size 36 watt glare free symmetrical including driver and taking down old UNSV one complete all as specified and directed. Make:- Havells cat No ENDURASLIMPROPLUS2X2PLR28/36WLED840MOD or equivalent of Philips/Bajaj

Supply and fixing ceiling fans complete with blades, down rods and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) all as specified and directed.

M&L for sub main wiring with two run of 4 sqmm single core multi stranded PVC insulated and unsheathed copper conductor (red for phase and black for neutral) of grade 1100 volt FRLSH cable in and including 1100 volt electrical grade PVC casing caping of desired colour not less than1.2 mm thick and 25 mm wide & 4 sqmm copper conductor cable PVC unsheathed green coloured for earthing with complete accessories duly connected with earth dolly complete all as specified and as directed incl taking down old unserviceable one.

All as per item No.145 above, but size 1.5 Sqmm two runs and with one run 1.5 Sqmm FRLSH copper wire for earth continuity.

S&F in replacement MCB distribution board Double door SPN 240 volts 8 way with 200 amps rated bus bar and making good to disturbed surfaces of floors walls etc all as specified and directed.

S & F in replacement MCB SP 6 to 32 Amps, 230 V AC complete all as specified and directed.

S & F in replacement MCB SPN 40 to 63 Amps, 230 V, AC complete all as specified and directed.

Taking down ceiling fan, dismantling blades and removing fan and blades to store yard

M&L for earthing complete with GI earth plate electrode 60x60cmx6mm thick burried directly in ground in earth pit not less than 2.25 mtr depth below normal ground level with top edge of the plate vertically to depth of not less than 1.5 mtr below ground level connected to & including GI lead 4 mm dia as earthing lead connecting to equipment by means of GI bolts & nuts etc with provision of charcoal and salt etc all as per electrical plate No-3 of SSR part-I 2009 including RCC cover and MS angle iron frame, watering with GI pipe 20 mm dia (medium grade) & MS funnel, concrete pit including excavation and earthwork in any strata and testing on completion etc. complete all as specified and directed

Mukund Engineers and Contractors

Aakar Construction