Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹29.0 LAccepted-AOC | L1 | Accepted-AOC Lowest bid found in order | |
| 2 | L2₹32.3 L+₹1.9 L (6.22%)Rejected-AOC | L2 | Rejected-AOC Other than Lowest bid | |
| 3 | L3₹36.1 L+₹5.7 L (18.8%)Rejected-AOC | L3 | Rejected-AOC Other than Lowest bid |
Tender Value
Refer Docs
EMD Value
₹54,000
Closing Date
7 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 874 EWS C/O 56 APO
GE 874 EWS C/O 56 APO
SPL REPAIR TO BLDG NO P-108 OF 866 FD WKSP AT DRUGMULLA
2023_MES_603247_3
GE 874/EWS-14/2023-24
Open Tender
Civil Works
Item Rate
180 days
Kupwara
As per NIT and tender documents
7 documents required · 7 mandatory
₹500
GE 874 EWS
₹54,000
10 Nov 2023
16 Sept 2023
14 Oct 2023
16 Sept 2023
7 Oct 2023
23 Sept 2023
Amount
BR and EM Portion
Demoloition of Concrete cement concrete unreinforcement in ground floors and pavings n exc 15 cm thickness (below or above ground level) as specified
M&L 75 mm thick PCC 1:3:6 type C-2 (using 20 mm graded crushed stone aggregate ) as in plinth protection finished even aned fair without using extra cement all as specified.
M&L for 50 mm mm thick PCC 1:2:4type B-0(using 12.50 mm graded aggregate) for floor as specified
Dismantling of Stone slabs and tiles of any laid bedded and pointed in any mortar description or thickness in floors, walls aprons etc.
M & L for Cement concrete D-2, 1:4:8 Type 40 mm graded aggregate , 75 mm thick as in sub base nover rammed earth all as specified
M & L for Cement concrete B-1, 1:2:4 Type 20 mm graded aggregate , 25 mm thick as in sub base over rammed earth all as specified
M & L for Non skid ceramic coloured tiles 7-8 mm thick, area exc 0.11sqm but nexc 0.18 sqm of each tile in floor etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile on 15mm thick screed bed in Cement Mortar 1:6 as specified
M & L for Glazed ceramic colour tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match , over 10mm thick rendering in Cement Mortar 1:4 complete all as specified & directed.
Dismantling plain or corrugated steel sheeting,any gauge ,thickness including Nainital or similar pattern roof covering .
S & F Pre- painted galvaniume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
Dismantling wall and ceiling boards or insulation boards/slabs/blankets, any thickness including cover fillet.
M&L plywood grade BWR type BB, 6mm thick fixed with nails to timber frame work in ceiling
Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions
M&L for Preparation of newly un treated surfaces and applying two coat of synthetic enamel paint over a coat of pink primer on wooden surfaces of any description not other wise described over 10 cm width or grith etc complete all as specifed and as directed.
M&L for Preparation of old painted surfaces and applying one coat of synthetic enamel paint on wooden surfaces of any description not other wise described over 10 cm width or grith etc complete all as specifed and as directed.
M & L Plain fillets 2nd class soft wood of exc. 3 & n.exc. 6 Sqcm, square rectangular or triangular in section , clean swan, secured nails as specified
Taking down chowkat with shutters exc.1.5 Sqm but n.exc.4 Sqm(w/o taking off shutters from chowkhat)
Taking down chowkat with shutters n.exc. 1.5Sqm (w/o taking off shutters from chowkhat)
S & F 2nd class soft wood plain solid straight chowkats and frames wrought framed, rebated on the solid all as specified.
Plain, framed, panelled shutters second class soft wood 30 mm thick (any number of panels), with panels of timber flat on both sides(feather edged), or of veneered particle board medium density, wood particle board with commercial faceveneers: supplied and fitted to chowkats
S & F Glazed and skeleton shutters, second class soft wood 35 mm thick open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats
Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing
Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life)
S&F 100 mm long Mild Steel butt hinges extruded aluminium anodised
S&F 75 mm size mild steel butt hinges medium weight
S&F 150mm long aluminium anodised barrel tower bolt of extruded section.
S&F 100 mm long aluminium anodised barrel tower bolt of exturded section
S&F aluminium anodised alloy handles fabricated type 150mm size of handle.
S&F 100 mm long aluminium handles cast type anodised.
S&F 300mm long aluminium alloy, anodised sliding door bolt, with hasp and staple (bolt type) cast or extruded section and fixing bolts of extruded section
Hacking out old broken glass (any thickness, size quality of description) from wooden frames or stone, concrete or brick sorrounds, glazad with putty or fixed with beeds complete all as specified.
03 mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq.m in each pane complete all as specified.
S & F in Stainless Steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed.
S & F for Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. incl of fixing supply pipe to flushing cistern, trap and waste pipe
M & L for Granite (of any type) work 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. as specified
S & F in repair Urinal spreader of CP any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms)
Supply & Fixing in repairs Vitreous China Ware Wash hand basin white flat back size 550mmx400mm including pedestal, cutting for and pinning ends of brackets or erecting stand including necessary PVC outlet pipe, CP coupling 32mm dia complete all as specified.
S&F in repairs vitreous china squatting pan 'Orissa' pattern size 580x440mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing system anti syphonage pipe etc complete all as specified and as directed
S&F in repairs PVC valveless,syphonic action type, low level PVC flushing cistren 10 ltr cap white with flush pipe & all fitting complete all as specified.
S&F Bib taps cast copper alloy ,chromium plated,with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule of 15mm bore, in repair.
S&F in repairs pillar tap cast copper alloy, fancy type with capstan heads chromium plated screwed down with high pressure with or without lettered hot or cold with long screwed, shanks and fly nuts screwed for iron pipe 15mm dia complete all as specified and as directed.
S&F PVC connection 15 mm length 450 mm fixed, in repairs.
Taking up or down 15mm dia GI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed.
Taking up or down 20mm dia GI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed.
S&F GI tube 15 mm dia medium grade galvanished with all fittings laid in floors /wall etc. complete all as specified and as directed.
S&F GI tube 20 mm dia medium grade galvanished with all fittings laid in floors /wall etc. complete all as specified and as directed.
Taking down of cement plaster of any desc including racking out of joints hacking for keys and scrubing down with water etc
Rendering 15mm thick on brick/stone masonry surfaces or other than fair faces in cement motar 1:4 finished even and smooth (without using extra cement).
M&L for Preparation new or undecorated surface of walls and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specifed and as directed.
Demolition of Brick/stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashler facing, dressed stonework and precast concrete articles
M&L for brick work with sub class 'B' bricks straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:4 Complete all as specified and as directed.
Preparation of old plastered surfaces of ceiling and applying one coat of oil bound distemper all as specified.
Preparation of old plastered surfaces of wall and applying one coat of oil bound distemper all as specified.
S & F Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms)
S & F in repair Towel Rail 450mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 170gms)
S&F lagging to 15mm bore pipes used in internal water supply or plumbing all round with, 25mm thick bonded mineral wool preformed 'SNAPON' pipe section of density 144 Kg \cum conforming to IS 9842 alongwith chiken mesh wire netting 25 guage , 20 mm mesh fixed in repairs.
S&F lagging to 20mm bore pipes used in internal water supply or plumbing all round with, 25mm thick bonded mineral wool preformed 'SNAPON' pipe section of density 144 Kg \cum conforming to IS 9842 alongwith chiken mesh wire netting 25 guage , 20 mm mesh fixed in repairs.
Providing and applying old plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth.
Preparation old surface after complete removal of existing treatment Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
Dismantling of rain water pipe and sewage line pipe of any type and any size including fitting complete all as specified and as directed.
S & F for Cast iron soil, 100 mm waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors pipes are epoxy coated inside & outside
S & F for Cast iron soil, 100 mm waste and vent pipes in any length with or without ears, with cement joints, fixed on walls, pipes are epoxy coated inside & outside.
S & F for Bends 100 mm (any radius), diminishing pieces or tapers (larger bore measured) cast iron
S & F for Branch pieces, 100 mm single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches cast iron
S & F for Bends (any radius)100 mm with duck's foot or heel rest cast iron
S & F for Sockets (double) 100 mm collars cast iron
S & F for Swan necks 100 mm (or off- sets)/Floor trap upto 152 mm projection cast iron
S & F for Traps ‘P’ or ‘S’ cast iron 100 mm as specified
S & F for Cast iron cowls/vent cowl 100 mm as specified
M&L for special water proofing treatment for sunken portion of WCs/ Bath & toilet executed in following stages:- Stage-1:- Demolition of WC including lime concrete and cement concrete coba etc and preparing the surfaces of existing sunken portion of WCs of STP Ltd in the proportion / quantity all as per manufacture instructions. Stage-2:- Providing 10mm thick plaster in cement mortar 1:3 mixed with integral water profing chemical Dr Fixit Pidicrete URP or plaster seal of STP Ltd in the proportion/ wuantity all as per Manufacture instructions. Stage 3:- Apply Dr Fixit Primeseal primer or Equivalent of STP Ltd (and allow to dry for 8 hours) all as pr Manufacturer's instructions. Stage 4:- Apply two coats of water proofing elastomeric coating system of Dr Fixit Raincoats with DFT 100 Micron or shalicry 215 of STP (The surface after painting one coats shall be allowed to dry of 6 hours before next coats) all as per Manufacturer's instructions. Stage 5:- Rendering 10mm thick in cement mortar 1:3 mixed with integral water proofing chemical Dr Fixit Pidicrete URP or plaster seal of STP Ltd all as per Manufacturer's instructions. Stage 6:- All CI joints shall filled with mixture of cement fine sand plaster seal of STP Ltd or Dr Fixit Pidicrete URP all as per Manufacturer's instructions. Stage 7:- Making holes in wall and fixing 600mmm long 20mm dia medium grade GI spout for draining the surplus water if any. Stage 8:- Carry out ponding test for 48 hours to ensure water tightness of repaired sunken portion. Note:- (a) Only plan area shall be measured and accorded for payment under this item. (b) Depth of sunken portion of WC's /Baths shall be upto 35cm, which is to be taken into account while quoting the rate against this item (c) Rate quoted by contractor shall be deemed to be included for all the horizontal and vertitical treated surfaces of sunken portions of WC & Bath.
Cleaning of PVC water tank at any height (on accessible/inaccessible roofs) by removing all scale, dirt, mud, any foreign material and removing accumulated silt, other dirty substance, algae, fungus and other bacterial material from sides/bottom of tank cleaning shall be done by draining / pumping out water/sludges from bottom removing edge and other growth from wall/ floor/ roof by high pressure cleaning method with jet set and again cleaning tank with fresh water. Disinfecting by using UV radiator and approved chemical (Chloriten) after cleaning writing letter/figures on black ground with white enamel paint of following capacity cleaning of PVC every six months:- (i) Date of cleaning. (ii) Next due date of cleaning. (iii) Remove of existing lettering/figures completely. The process of cleaning for the following capacity of water tank:- (a) Cleaning of PVC water tank capacity n.exc 500 litres.
Taking down carefully copper/ aluminium unserviceable/ perished point wiring (light, fan, socket or power complete including fixture and fittings such as switches, ceiling roses, pandents, regulators, sockets, light fittings,removing material from site for taking credit etc and making good disturbed surfaces of wall, floors, complete all as specifiecd and directed.
Taking down MCB DB's complete with MCB's/Isolator etc removing materials from site and making good disturbed surface of walls, floors etc. complete all as specified and directed.
Disconnecting unserviceable sub main wiring/service connection of any size and including steel conduit and accessories and removing from site and making good the disturbed surfaces complete all as specified and directed
Point wiring for one light point/fan point controlled by one switch with 1.5 sqmm PVC (FR-LS-H) insulated un-sheathed copper conductor single core multi strand flexible cable and 1.5 sqmm PVC (FR-LS-H) insulated un-sheathed copper conductor single core multi stranded flexible cable (green color) as earth lead in and including cable 1100 volts grade including casing and capping (ISI marked) for one light/ fan point including 2nd class hard wood rectangular block open recessed cover with 3mm thick plastic laminated sheet cover including cutting chases to wall making good the disturbed surfaces to match with the existing specification complete all as specified.
All as per item No 77 herein before but wiring with 1.5 sqmm copper wire ( FR-LS-H) and 1.5 sqmm earth wire for socket outlet 3 pin 5 amps on same board.
All as per item No 77 herein before but wiring with 1.5 sqmm copper wire ( FR-LS-H) and 1.5 sqmm earth wire for socket outlet 3 pin 5 amps on independent board.
All as per item No 77 herein before but wiring with 2.5 sqmm copper wire ( FR-LS-H) and 1.5 sqmm earth wire for socket outlet 6 pin 15 amps on independent board.
S&F switch piano flush button single pole, one way 5 amps complete all as specified and directed.
S & F switch socket combination 2 in 1, 5A, flush type.
S & F switch socket combination 5 pin 16A, flush type.
S&F of distribution board single pole & neutral with 200 Amps rated bus bar, for double door IP-42 DB's ,made out of sheet steel enclosure, recessed type, factory made powder coated 8 way -240 volts suitable for housing MCB's and isolator's complete in all fixing material/accessories etc complete all as specified and directed.
S&F MCB's single pole 240 volts 6 to 32Amps 10 KA 'C' curve series, all as specified and as directed by Engr -in-Charge.
S & F of MCB SPN, 240 volt, 63 Amp capacity, 10 KA, 'C' curve .all as specified and as directed by Engr -in-Charge.
M & L Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendant fittings
S&F LED, 20 Watts, 4 ft, fittings complete with all accesories for mounting light fittings complete with earth terminal connection, 3 terminal/ PVC/ polycarbonate, isolated body.
Supply and fix ceiling rose with earth terminal connection, 3 terminal/ PVC/ polycarbonate, isolated body.
Wiring for circuit/submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/recessed as required in PVC casing caping of size 2x2.5 sq. mm + 1x1.5 sq. mm earth wire
Earthing complete with galvanised steel earth plate electrode 60x60cmx6.3 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge lead of the platenot less than 1.5 mtr below normal ground level, connected galvanised earrth lead wire 4.0mm dia by means of bolts, nuts,check nuts and washers of galvanised iron or steel all as shoen in Electrical plate No 3 connected to earthing test point all as specified or indicated including testing on completion.
S&F 09W/10W Bulk head liminiares including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size.
Supply and fix LED Bulb 9 Watt all as specified and directed by Engr-in-Charge.
S&F Exhaust fan made of sturdy engineering plastic complete with louvers shutter, voltage 230v , 50HZ , RPM 1200, Copper winding of sweep 300mm, with 2 years warrenty.
S&F electric water Heater, storage type steel body with copper inner tank and and heating element upto 2 KW capacity 50 liter , BEE 5 Star rated complete with all accesries such as safety valve, thermostate, NRV, connection piece etc.
M/S SS SHAH WALI & CO
M/S AB AHAD RATHER
Bidder Name
M/S AB AHAD RATHER
M/S MIR BUILDERS
M/S SS SHAH WALI & CO
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .