Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹80.1 L
EMD Value
₹1.6 L
Closing Date
11 Mar 2024, 10:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Karnataka Power Corporation Limited
Mahesh M B
Providing ring girder and ring stiffeners to exposed portion of penstock line of unit no.1 to 6 at NPH.
KPCL/2023-24/PS/WORK_INDENT1216/CALL-2
KPCL/2023-24/PS/WORK_INDENT1216/CALL-2
Open
Power stations
Two Tender Document System(Two Cover)
KPCL Executive Engineer DPH Office KVP Nagjhari
14 documents required · 14 mandatory
The intending bidder(s) should have successfully completed as prime contractor at least One similar work such as Steel Fabrication to an extent of 50 percent of the cost of work amounting to Rs. 40.08 lakhs. The work done certificate issued from State/Central Govt./Public Sector Unit s from officers not below the rank of Executive Engineer or equivalent cadre shall be furnished in the last five financial years that is (2018-19, 2019- 0, 2020-21, 2021-22 and 2022-23) As The intending bidder should submit work done certificate issued by competent authority. (Weightage of 10 percent year will be given to the cost of completed works of previous years to bring them to the price level of present financial year).
Assessed available tender capacity (AxNx2.5-B) should be greater than the amount put to tender, where, A:Maximum value of civil engineering works executed in any one year during the last five years (present financial year) price level taking into account the completed as well as works in progress. N:Number of years prescribed for completion of the works for which tenders are invited for 0.50 year. B : Value, at present financial price level, of existing commitments and ongoing works to be completed during the next 6 Months (0.50 year).
The intending bidder(s) should have achieved in at least two financial years an average annual financial turnover of Rs. 80.15 lakhs in past five completed financial years ie., (2018-19, 2019-20, 2020-21, 2021-22 and 2022-23) As a proof, annual turnover certificate, audited profit-loss account and balance sheets duly certified by Chartered Accountant should be furnished. (Weightage of 10% per year will be given to the financial turnover of previous years to bring them to the price level of present financial year).
KPWD Class-III and above registration.
Duly filled qualification information as per section-3 along with supporting documents attached to the bid document .
Income Tax PAN
GST Registration certificate
Independent PF code registration certificate.
Declaration I attached to bid document.
Declaration II (Upload A or B) attached to the bid document
Declaration III (regarding PF) attached to the bid document
Liquid assets worth Rs. 24.05 lakhs in the form of credit line/letter of credit/certificates from banks for meeting the fund requirement etc
Minimum quantities of work executed in any one year (for a continues period of twelve months) during previous five years period. Steel Fabrication Qty: 19.23 Tonnes.
Equipment capacity: The bidder shall demonstrate availability by owning at least 50% of the required/specified key and critical equipment for the work and remaining 50% can be deployed on lease/hire bases. The relevant documents (commitment of agreement etc.,) are to be furnished.
Other relevant documents if any.
₹2,010
₹1.6 L
1 Mar 2024
1 Mar 2024
12 Mar 2024
4 Mar 2024
6 Mar 2024
Providing ring girder and ring stiffeners to exposed portion of penstock line of unit no.1 to 6 at NPH.
Dismantling of concrete saddle support of penstock carefully and disposing off the released materials as directed with all lead and lifts etc., complete without damaging the adjoining structures equip...
Drilling 35 mm diameter grout holes in concrete / rock by percussion drilling using jack hammer or stooper drills as directed to specified depth for consolidation / anchor/contact grouting including c...
Providing and fixing 25 mm dia 2.75 m long ribbed steel anchor rods with one end split and driven firmly using steel wedge into 1.25 m deep 38 mm dia. hole drilled in bed rock and other end provided w...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Supplying, fitting and placing TMT FE 550/550D Steel Reinforcement complete as per drawing and technical specification.Providing, fabricating and placing in position steel reinforcement bars for RCC s...
Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel et...
Fixing available Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. a...
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two with ready mixed red oxide zinc chromate primer coats on new work after thoroughly brooming the surfac...
Finishing walls with water proofing cement paint of required shade :Old work (one coats applied @ 2.20 kg/10 m²) over priming coat of primer applied @ 0.80 litrs/10 m² complete including cost of Pri...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Sealing of crack / porous concrete with Epoxy Grout by injection through nipples complete as per clause 2803.1.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
bid document_ring stiffener nph II 29.02.2024.docx
Tender Document • 1.33 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .