REPAIRS TO JOINERY PLUMBING AND OTHER MISC WORKS IN DEPOT BN AREA IN THE AOR OF AGE B R MEG UNDER GE N BLORE

Amount

Taking down chowkats (without taking of shutter from the frame) not exceeding 1.5 sq m each including making good the disturbed surface in CM 1:3 all as specified and directed

All as per Item No 1 above, but exceeding 1.50 sq m and not exceeding 4.00 sq m each

Demolition of cement concrete and paving not exceeding 15 cm thick (below or above ground level), removing debris to locations as directed by Engineer-in-Charge, complete all as specified and as directed.

Demolition of brick work /stone masonry/PCC block masonry built in cement mortar of any description all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

Dismantling of single layer Mangalore pattern roofing etc complete all as specified and as directed

Dismantling of single layer Mangalore pattern roofing including ridges bedded in cement mortar etc complete all as specified and as directed

Dismantling timber scantlings 40 sq. cm and over in section, in any position as in Framed work etc complete all as specified and as directed

Dismantling un framed work as in fillets, rail, posts, rafters, purlins etc section area not exc 40 sq. cm etc complete all as specified and as directed

Dismantling Battens for tiles, shingles etc, of any size spaced exc 15 cm including tilting fillets etc complete all as specified and as directed

Taking down cement plaster on brick or concrete or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc., complete and removing debris to locations as directed by Engineer-in-Charge, complete all as specified and as directed.

Material and labour, for Plain cement concrete type B0 1:2:4 (12.5mm graded stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edges in chajjas, coping, padding concrete, etc complete all as specified and directed.

Material and labour, for Pre-cast cement concrete block masonry with grade ‘C5’ solid blocks exceeding 10 cm in width, having minimum average compressive strength of 50 Kg / Sq cm as per IS 2185 (Part- I) 2005 and set in CM 1:6 complete all as specified and as directed.

S&F Powder Coating (minimum thickness of powder coating 50 micron) aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete shall as specified and as directed

S&F Powder Coating (minimum thickness of powder coating 50 micron) aluminium fixed type window and ventilator shutters, with aluminium section weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified etc. complete all as specified.

S&F Powder Coating (minimum thickness of powder coating 50 micron) aluminium door shutters, aluminium section weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified.

Supply and fix in repairs stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.18 mm, fixed with mild steel screw & bolts all as specified and as directed.

Supply and fix, stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm, fixed with mild steel screw & bolts all as specified and as directed.

Supply and fix in repairs, door closer hydraulically regulated designation No.3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg of aluminium (Die cast body) complete all as specified and as directed.

Material and labour, mild steel framed work such as in doors or gates of angle, or tee sections with gusset plates, rails, braces, etc. completely drilled for fixing of steel sheeting or other covering, doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging doors fittings (inclusive of steel sheeting or other covering, running rails and guides) and handing also fastening and fixing complete Grade Fe 410 - W (Grade-E- 250) quality-A complete all as specified and as directed.

S&F in repairs 8/9 mm thick Pre-laminated particle board, exterior grade, pre-laminated both side with decorative choice lamination fixed to aluminum fame work as in doors etc complete all as specified and directed.

S&F grid suspended false ceiling grid system of size 600x600mm with main runner 29x24.7x0.8mm cross tee 29x24.7x0.8mm and wall angle 22.2x22.2x0.65mm. Ceiling suspended with 3mm dia GI wire hanger fixed with steel dash fastener, butter fly clips, hold down clips etc (Main runner, cross tee& wall angle of MS galvanized with PPPCGS) including 4mm thick HPSC self textured design pre primer non asbestos fibre cement building board fixed to false ceiling complete including taking down old ceiling of any description .

Material and labour for 4 mm thick tinted sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 sq m in each pane all as specified and as directed.

Material and labour for 5.5 mm thick Sheet glass, ordinary quality and glazing with oil putty in squares exceeding 0.5 sq m in each pane all as specified and as directed.

Hacking out old broken glass of any thickness, size, quality or description from metal frame including punching or drilling out old glazing pins/spring clips and provding Material and labour for 3 mm thick plain sheet glass and glazing with oil putty in squares not exceeding 0.5 Sq m in each pane all as specified and as directed.

Material and labour for, preparing new steel surfaces of any description, over 10 cm width or girth, applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed

Material and labour for, Rolled sections (of Grade Fe-410-W (E-250-Quality A) as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and directed

M&L providing 25mm thick, cement concrete type B0 1:2:4 (12.50mm graded stone aggregate) in copings, parapets and railing up to 60cm height, leveling concrete for Roof slab, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating as directed

Demolition of existing roof treatment of any type including cement plaster and providing screed bed/rendering 10mm thick in CM (1:3) mixed with and including supply of approved water proofing compound as per manufacturers instructions by removing all loose gravel, dirt, oil, grease and foreign materials by jet or dry air, cleaning the surfaces mechanically or by grinding to make it smooth and applying APP modified water proofing membrane as per IS 1654-2017/IS 16352-2017 , 3mm thick and weighing not less than 3.60kg/Sq m reinforced with non woven polyster/HMHDPE matt black finished over compatible primer/bonding bitumen @ 0.40 Litre/Sq m and torch applications of membrane with 75mm side overlap and 100mm end lap after necessary preparation of surface complete as per manufacturer's instructions and applying a coat of solar reflective bituminous aluminum paint on top @ 0.10 litre/sq m including removing the debris as directed by Engineer-in-charge etc,complete all as specified and directed.

Dismantling Asbestos (corrugated or semi corrugated) sheet in roof covering / cladding and providing material and labour, 6mm thick asbestos cement, fixed with L or J type or cranked hooked, bolt all as specified and as directed.

Material and labour, 6 mm thick asbestos cement, two pieces serrated ridge for corrugated or semi corrugated sheets fixed with L or J type or cranked hooked, bolt all as specified and as directed.

Dismantling Fibre glass reinforced translucent corrugated sheeting in roof covering / cladding and providing material and labour, 2 mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc., all as specified and as directed.

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, pre fixed with self tapping screws all as specified and as directed.

S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge / valley pre fixed with self tapping screws all as specified and as directed.

M&L for 75 mm thick Plain cement concrete type D- 2, 1:4:8 (40mm graded aggregate) as in sub base of flooing etc complete all as specified and as directed

M&L for cement concrete type C-1, 1:3:6 (using 20 mm graded crushed stone aggregate) 75mm thick as in plinth protection, laid in alternate bays (not exceeding 2 Sqm each) finished the concrete surface even and smooth at top without using extra cement and providing joints throughout the thickness of plinth protection, filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight all as specified and directed

Demolition of floor, hearth or wall tiling including cement mortar bedding (including backing), and removing the rubbish to locations as directed by Engineer-in-Charge, and providing Material and labour, for non-skid Ceramic coloured tiles 7 to 8 mm thick (Grade B-IIA), area of each tile exceeding 0.06 sq m but not exceeding 0.11 sq m, as in flooring, set and pointed in white or coloured cement to match colour of tiles over and including 15 mm thick screed bed in CM (1:6) complete all as specified and as directed.

Demolition of floor, hearth or wall tiling including cement mortar bedding (including backing coat), and removing the rubbish to locations as directed by Engineer-in-Charge, and providing Material and labour, for coloured Glazed ceramic printed tiles, of size 450 x 300 x 7 mm thick (Grade B-IIA) as in vertical surfaces such as skirting, dado etc., set and jointed in neat cement slurry and pointed in epoxy grout to match with the colour of tiles, laid over and including provision of backing coat of 10 mm thick rendering in CM 1:3, complete all as specified and directed.

Demolition of floor, hearth or wall tiling including cement mortar bedding (including backing coat), and removing the rubbish to locations as directed by Engineer-in-Charge, and providing Material and labour, for vitrified ceramic tiles (light shade) 8 to 10mm thick (square/rectangular) polished, area of each tiles exc 0.18 sq m but not exc 0.36 sq m in flooring, set and jointed in neat cement slurry and pointed in white or coloured cement to match with adjoining surfaces, over and including 15 mm thick screed bed in CM (1:6) complete all as specified and as directed.

Demolition of floor, hearth or wall tiling including cement mortar bedding (including backing coat), and removing the rubbish to locations as directed by Engineer-in-Charge, and providing Material and labour, for vitrified ceramic tiles (light shade) 8 to 10mm thick (square/rectangular) polished, area of each tiles exc 0.18 sq m but not exc 0.36 sq m in vertical surfaces, dado / skirting, etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match with adjoining surfaces, over and including 10 mm thick backing coat in CM (1:3) complete all as specified and as directed.

Demolition of floor, hearth or wall tiling including cement mortar bedding (including backing coat), and removing the rubbish to locations as directed by Engineer-in-Charge, and providing Material and labour, for full bodied vitrified ceramic tiles (light shade) 8 to 10mm thick (600 mm x 600 mm) polished, laid as flooring, set and jointed in neat cement slurry and pointed in white or coloured cement to match with adjoining surfaces, over and including 15 mm thick screed bed in CM (1:6) complete all as specified and as directed. Note : Make Endura Series of HR Johnson or techno commercial equivalent in Kajaria / Somany

Demolition of floor, hearth or wall tiling including cement mortar bedding (including backing coat), and removing the rubbish to locations as directed by Engineer-in-Charge, and providing Material and labour, for full bodied vitrified ceramic tiles (light shade) 8 to 10mm thick (600 mm x 600 mm) polished, laid on vertical surfaces such as skirting, dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match with adjoining surfaces, over and including 10 mm thick backing coat in CM (1:3) complete all as specified and as directed. Note : Make Endura Series of HR Johnson or techno commercial equivalent in Kajaria / Somany

Demolition of stone slabs and tiles of any description and providing Material and labour for providing, exterior grade, coloured glossy finish rubber pressed, cement concrete designer chequered tiles of size 30cm x 30cm x 25mm thick set, jointed and pointed in neat cement slurry with grey cement and pigment to match the shade / colour / matrix of tiles as in floor, over and including cement screed bed of 15 mm thick in CM 1:6 complete all as specified and as directed

Demolishing paver block tiles, and providing material and labour for, Rubber moulded pressed precast concrete interlocking paver block of any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and no pigments, laid over and including 50 mm thick sand cushioning complete all as specified and as directed.

Material and labour for, rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished plastered surface even and smooth without using extra cement complete all as specified and as directed

Material and labour for, rendering 15 mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:4 with WPC, finished plastered surface even and smooth without using extra cement complete all as specified and as directed. Note :- Supply only WPC will be measured and paid separately

Supply only water proofing liquid complete all as specified and as directed

Material and labour for, rendering 5 mm thick on ceiling / RCC surfaces in cement mortar 1:3, finished plastered surface even and smooth without using extra cement complete all as specified and as directed.

M&L for complete removal of existing treatment on wall and applying two coat of oil bound distemper white or tinted over a coat of alkali resistant primer over 1mm thick putty complete all as specified and as directed

Preparation of newly plastered surfaces and applying two coats of oil bound distemper over a coat of alkali resistant primer over and including 1 mm thick wall care putty, complete all as specified and as directed. Note : Quoted rate shall deemed to include for cost of wall care putty.

Material and labour preparation of newly plastered surfaces of wall and applying two coats of cement base paint complete all as specified and as directed.

Material and labour preparing newly plastered ceiling surfaces and applying three coat of white wash complete all as specified & as directed.

Preparation of old surfaces including brooming down with steel wire brushing scrapping down soot’s, moulds, moss and efflorescence, salts , treating oil and greasy spots etc on wall surfaces and applying one coat of oil bound distemper white or tinted all as specified & as directed.

Preparation of old surfaces including brooming down with steel wire brushing scrapping down soot’s, moulds, moss and efflorescence, salts , treating oil and greasy spots etc on wall surfaces and applying two coat of oil bound distemper white or tinted all as specified & as directed.

Preparation of old painted wooden surfaces of any description exceeding 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Preparation of old painted steel surfaces of any description exceeding 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Supply and fix in repairs, Vitreous china snow white, wash hand basin of size 550 mm x 400 mm excluding chain and plug and porcelain stopper including brackets, supply and fixing of 32 mm dia, PVC corrugated / flexible waste pipe, 800 mm long and with brass waste coupling of 32 mm dia, complete all as specified and as directed. Make : CERA, Cat No S2040103 or techno commercial equivalent in other makes, complete all as specified and as directed.

Supply and fix in repairs, Vitreous china, white colour, wash down water closet pan (pedestal pattern), with PP soft seat cover, hinges, other fixing accessories set (excluding flushing cistern and flush pipe), UPVC (SWR), 'P' or 'S' trap, and connecting to drain (or outgoing pipe), flush pipe, anti syphonic pipes and removing debris outside MD land. Make : Cat Part No S1050101 of Cera or techno commercial equivalent in other makes complete all as specified and as directed.

Supply and fix in repairs, Vitreous china, white colour, 'Orissa pattern' squatting pan of size 580 mm x 440 mm with UPVC 'P' trap or 'S" Trap, front or back inlet, integral foot rests, connecting to trap, flushing pipe, anti syphonic pipe, including making good to floor removing debris outside MD land, complete, all as per Make : Cera, Cat No S3010102 of CALINA make or techno commercially equivalent in other makes specified here-in-after.

Supply and fix in repairs, PVC valve less, syphonic action type, flushing cistern, Duo Flush cistern 10 litre capacity, low level, white, with inlet, ball valve, float and handle including brackets, connections to pipes and fixing of chain and pull, or lever, complete all as specified and directed. (Cat No-502 of Prayag or equivalent in any approved make as in CA)

Taking down unserviceable GI tubing, supply and fixing new CPVC pipes, outer dia 20 mm, SDR 11 Plain with all fittings, such as Tee, elbows, sockets, unions, short pieces and application of bituminous paint in concealed portion, fixed to wall/ ceiling or laid on floors, complete all as specified and as directed. Notes: Serviceable Taps, valves in any shall be removed before taking down pipe and same shall be re-fixed while providing new pipe.

Taking down unserviceable GI tubing, supply and fixing new 20 mm bore Galvanized Iron tubing, medium grade, with all fittings, such as Tee, elbows, sockets, unions, short pieces and application of bituminous paint in concealed portion, fixed to wall/ ceiling or laid on floors, complete all as specified and as directed. Notes: Serviceable Taps, valves in any shall be removed before taking down pipe and same shall be re-fixed while providing new pipe.

All as per Serial Item No 62 here-in-above, but of outer dia 25 mm dia

Supply and fix in repairs, 15 mm pillar taps swan neck type, chromium plated cast copper alloy fancy type complete all as specified and as directed.(Cat No PIS-14H Neptune series of Prayag or equivalent make as specified here-in-after)

Supply and fix in repairs, 100mm (4") overhead shower ABS with brass Arm (225mm) & flange including fixing to steel pipe or union complete all as specified and as directed. (Cat No BS-73 Neptune series of Prayag or equivalent make as specified here-in-after).

Supply and fix in repairs, 15 mm angle cock CP cast copper alloy screwed down high pressure with capstan head handle screwed both ends or for unions etc . (Cat No PIS-10H Neptune series of Prayag or equivalent make as specified here-in-after)

Supply and fix in repairs, Bib Cock 2-way double handle with CP flange all as specified and as directed. (Cat No-PIS-12H Neptune series of Prayag or equivalent make as specified here-in-after).

Supply and fix in repairs, Chromium plated long body bib tap 15mm dia with CP flange all as specified and as directed. (Cat No-PIS-08H Neptune series of Prayag or equivalent make as specified here-in-after).

Supply and fix in repairs, Chromium plated bib tap 15mm dia with CP flange all as specified and as directed. (Cat No-PIS-06H Neptune series of Prayag or equivalent make as specified here-in-after).

Supply and fix in repairs, Health faucet, brass body with 1mtr SS braided tube & wall hook complete all as specified and as directed (Cat No-BEA-41/BEA-85 of Prayag or equivalent make as specified here-in-after)

Supply and fix in repairs, Towel rail stainless steel glossy finish 20 mm dia and 600 mm long complete all as specified and as directed. (Cat No-BA10S of prayag or equivalent make as specified here-in-after)

Supply and fix in repairs Towel ring Brass glossy finish complete all as specified and directed (Cat No BA-02 of Prayag or equivalent make as specified here-in-after)

Supply and fix in repairs Soap dish chromium plated brass all as per Cat Part No BA-45 of Prayag or equivalent makes fixed in wall as per manufacturers instruction.

Supply and fix in repairs Mirror 600x450 x 5-6mm thick with frame cat No BLM-01F of PRAYAG or equivalent make complete all as specified and directed

Supply and fix in repairs peg set of six (Cat No BEA 30 of Prayag or equivalent make of CA) fixed in wall as per manufacturers instruction

Supply and fix in repairs Toilet paper holder (Cat No BA-88 of Prayag or equivalent make of CA) fixed in wall as per manufacturers instructions all as specified and as directed.

Supply and fix in repairs PVC connection (Suitable for Cold Water Supply) 15 mm size with PTMT nuts of length 450 mm, all as specified and as directed.

Supply and fix in repairs, 32 mm dia, 800mm long PVC corrugated waste pipe complete all as specified and as directed.

Supply and fix in repairs, 32 mm dia, 800mm long PVC corrugated urinal waste pipe complete all as specified and as directed.

Dismantling of unserviceable floor trap, supply and fix PVC(SWR) Multi floor trap 75 mm dia outlet with CP grating, including jointing with solvent cement complete all as specified and as directed.

Supply and fix in repairs grating doom 100 mm dia of PTMT (Minimum weight 25 grams) complete all as specified and as directed

Supply and fix in repairs 15mm dia Bib tap (Minimum weight 15mm-120gms), long body, PTMT fancy type any colour screwed, for iron pipe and fixed complete all as specified and as directed.

Supply and fix in repairs 15mm dia Pillar tap PTMT fancy type (Minimum weight 15mm-120gms), any colour screwed, for iron pipe and fixed complete all as specified and as directed

Supply and fix in repairs 15mm dia angle stop valve of PTMT (Minimum weight 15mm-90gms), any colour pressed screwed, for iron pipe and fixed complete all as specified and as directed

Dismantling of water tanks of 500 litres capacity from roof top and supply and fixing Rotational moulded polyethylene water storage tanks (double layered) of 500 Litres capacity with ISI mark embossed on it, (cylindrical, vertical with closed top) hoisted and fixed in position complete all as specified and as directed.

Dismantling of water tanks of 1000 litres capacity from roof top and supply and fixing Rotational moulded polyethylene water storage tanks (double layered) of 1000 Litres capacity with ISI mark embossed on it, (cylindrical, vertical with closed top) hoisted and fixed in position complete all as specified and as directed.

Disconnecting water tank of capacity up to 500 litres and setting aside for carrying out repairs and re-fixing disconnected tank.

Disconnecting water tank of capacity exc 500 litres and not exceeding 1000 litres, setting aside for carrying out repairs and re-fixing disconnected tank.

Supply and fix in repairs, 20 mm dia Ball float valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 210 grams) complete all as specified and as directed.

Supply and fix in repairs, gun metal, globe or gate valves 20 mm bore (ISI marked) with iron wheel head screwed both ends for iron pipe complete all as specified and as directed.

Supply and fix in repairs, gun metal, globe or gate valves 25 mm bore (ISI marked) with iron wheel head screwed both ends for iron pipe complete all as specified and as directed.

Dismantling plain or corrugated steel sheeting any gauge, thickness, including nainital or similar pattern roof coverings complete all as specified and as directed.

Atom Engineers and Builders

Shanmuga Constructions

deepak kumar vishwakarma

J PUSHPALATHA ENGINEER AND CONTRACTOR

KRD ASSOCIATE

K. VENKATESH NAIDU

M/S SIRI BUILDERS