C/oCentral Garbage Depository for Bio Degradable Waste for En. and Forest Dept at Kavaratti(Segregate Material Recovery and Sorting area, Compost Pit and Field Office, Com Wall, Guard Room, CCRoad with cable Trenches Toilet FootPath,and RainwaterSump

Amount

Surface dressing of the ground including removing vegitation and in equalities not exceeding 15cm deep and disposal of rubbish lead up to 50 meter and lift up to 1.5 meter.

Earth work excavation in foundation trenches or drains not exceeding 1.5m in width or 10 sq.m on plan including dressing of sides and ramming of bottoms, lift upto 1.5m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 m. Hard Soil

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc layers not exceeding 20cm in depth consolidating each deposited layers by ramming and watering lead up to 50 mtr and lift up to 1.5 metres

Providing and laying cement concrete 1:4:8 (1 cement 4 M- sand 8 granite chips ) for foundation and plinth

Providing and laying cement concrete 1:5:10 (1 cement 5 M-sand 10 granite chips ) foundation and plinth

Providing and laying damp proof course 40mm thick with cement concrete 1:2:4 ( 1cement 2 M-sand 4 granite chips 20mm nominal size)

Reinforced cement concrete work 1:1.5:3 (1 cement 1.5 M-sand 3 granite chipps 20mm nominal size excluding cost of centring, shuttering and reinforcement . a) foundation footing base of coloum etc and mass concrete

Reinforced cement concrete work ( wall any thickness) including attached pillasters, buttress, plinth and string course, fillets columns, pillars, peirs, abutments, post and struts etc... up to floor five level excluding cost of centring,shuttering and reinforcement . 1:1.5:3 (1 cement 1.5 M-sand 3 granite chipps 20mm nominal size

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 degree landings, shelves chajjas, lintel, bands, plain window sills, staircase and spiral staircase .. up to floor five level excluding cost of centring,shuttering and reinforcement . 1:1.5:3 (1 cement 1.5 M-sand 3 granite chipps 20mm nominal size

Cold twisted steel reinforcement for R.C.C work including bending, binding and placing in position complete.

Centering and shuttering including strutting propping etc and removal of form work a) foundation footing base of coloum etc and mass concrete

Centering and shuttering including strutting propping etc and removal of form work Suspended floors. Roofs,landings, balconies and access platform

Centering and shuttering including strutting propping etc and removal of form work Lintel , beams , plinth beams,girder, bressummers and cantilivers

Centering and shuttering including strutting propping etc and removal of form work Column, piller,piers, abutments, posts and struts.

Cement concrete block (machine moulded)masonry in foundation and plinth in CM 1:6 (1 cement 6 M.sand )with blocks of size 40cmx20cmx15cm.

Cement concrete block (machine moulded)masonry in superstructure above plinth level in CM 1:6 (1 cement 6 M.sand )with blocks of size 40cmx20cmx15cm.

Providing wood work in frames of doors, windows, clerestory windows and other frames wrought framed and fixed position First class Karimaruth /Ayni/Irul.

Providing and fixing 35mm thick panelled, glazed or panelled and glazed shutters for doors windows and clerestory windows including anodised aluminium butt hinges with necessary screws. First class karimaruth /Ayni/Irul.

Providing and fixing karimaruth wood or equivalent 25mm square wooden bars at required spacing in wooden frames of windows and clerestory windows First class karimaruth /Ayni/Irul.

Providing 40x5 mm iron hold fast 40cm long including fixing to frames with 10 mm dia bolts, nuts, wooden plugs and embedding in cement concrete block of size 30x10x15 cm of mix 1:3:6 ( 1 cement, 3 M-sand 6 graded stone aggregate of 20mm nominal size)

Providing and fixing brass tower bolt (barral type) with necessary screws etc complete. a) 100 mm x 10mm

b) 250 mm x 10mm

Providing and fixing brass handle with necessary screws etc complete. a) 75 mm

Providing and fixing Bright finished brass casement stay with necessary fittings and screws .200mm weighning not less than 240gms

6mm thick cement plaster to ceiling with CM. 1:3 (1Cement,3 Plastering .Sand)

12mm thick cement plaster 1:6 (1Cement,6 Plastering Sand)outside

15mm thick cement plaster with CM 1:6 on the rough side of single or half brick wall inside (1Cement,6 Plastering Sand)

Providing and applying wall putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete.

Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufactures specifications two or more coats applied on walls @1.25ltr/10 sqm) over including priming coat of special primer applied @ 0.75 ltr/10 sqm .Asian/Nerolac/Berger

Painting wood work with Delux Multi Surface paint to give an even shade. Two or more coats applied on @ 0.90ltr/10sqm) over under coat of primer applied @ 0.75 ltr/10 sqm of approved and manufacture Asian/Nerolac/Berger

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittingsi/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes &fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc.,) 20 mm nominal bore

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, this included jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. (External work). 32 mm nominal Bore

Providing and fixing CP brass bibcock of approved quality and manufacture complete. a) 15 mm nominal bore

Providing and fixing CP brass Angle cock of approved quality and manufacture complete. a) 15 mm nominal bore

Providing and fixing ball valve (PVC ) of approved quality and manufacture complete. (a) 25 mm nominal bore

Providing and placing Sintex water tank on terrace up to the roof two level of approved quality and manufacture complete (a) 500 Litre capacity

Providing and fixing nominal guage PVC Pipe of approved quality compleate with special flang compression type fittings including trenching and re filling etc. External work (a)63mm diametre (6 kg per sqcm)

(b)110mm dia (6 kg per sqcm)

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors: 100 mm inlet and 100 mm outlet Sand cast iron S&S as per IS: 3989.

Structural steel work riveted,bolted or welded in built up sections,trusses and framed work,including,hoisting,fixing in position and applying a priming coat of approved.G.I.Section

Painting steel work with Deluxe Multi surface paint to give an even shade.Two or more coats applied on @0.90litr10sqm) of approved and manufacture.Asian/Nerolac/Berger

Cement concrete 1:2:4(1cement: 2metale sand:4graded stone aggregate 40mm nominal size)in pavements, laid to required slope and camber in panels as required including side shuttering,consolidation finishing and tamping complete.

Providing and laying 60mm thick factory made cement concrete inter locking paver block of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design/sha pelaidin required colour and patter nover and including 50mm thick compacted bed of Fines and,filling the joints with fine sand etc.all complete as per the direction of Engineer-in-charge.with top surface polishing in smooth.

Providing and fixing 24 mm thick factory made PVC door shutters made of styles and rails of a UPVC hollow section of size 59x24 mm and wall thickness 2 mm ± 0.2 mm with inbuiltedging on both sides. The styles and rails mitred and joined at the corners by meansof M.S. galvanised/plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm ± 0.1 mm wall thickness. The lock ail made up of’H’ section, a UPVC hollow section of size 100x24 mm and 2 mm ± r 0.2 mm wall thickness fixed to the shutter styles by means of plastic/galvanised M.S. ‘U’ cleats. The shutter frame filled with a UPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm ± 0.1 mm wall thickness . The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer’s specification and direction of Engineer-in-charge. (For W.C. and bathroom door shutter).

Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet mitred at corners and joined with 2 Nos. of 150mm long brackets of 15x15mm M.S. square tube, the vertical door profiles to be reinforced with 19x19mm M.S. square tube of 19 gauge,EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100mm size complete as per manufacturers specification and direction of Engineer-in-Charge.

Providing and fixing PVC Septic tank of Size 2mtrx1.mtr dia

Providing and fixing hand rail of approved size by welding etc. to steel ladder rail-ing, balcony railing and staircase railing including applying a priming coat of approved steel primer. G.I.Tube (Full cost)(2Gate & Two leaf) 3.00mtrx2.00mtr

Providing and fixing white vitrous China water closet Pedestal pan(European)type WC pans with white plastic seat and lid and rubber buffers,15white vitrous China low level flushing system of approved make with fittings and brackets 40mm flush bend,20mm over flow pipe with complete including cutting and making good the walls and floors where required White EWC pan with plastic seat and lid Cera/ Hindware / Parryware.

Providing and fixing ceramic glazed floor tiles ( anti skid) of size 300x300mm (thickness to be specified by the manufacture)of first quality confirming to IS:15622 of approved make,in colours such asWhite,ivory,Grey,Fume red brown,laid on 20mm thick cement mortar1:4(1cement,4P sand)and joining with white cement and matching pigment etc...complete. Jhonson/Kajaria/Bell

Providing and fixing 1st quality ceramic glazed wall tiles( anti skid) confirming to IS:15622 ( thickness to be specified by the manufacture ) of approved make,in all colours,shades except burgundy ,bottle green,black of any size as approved by engineer-in-charge in skirting,risers of steps and dado over 12mm thick cement mortar 1:3 ( 1cement, 3Psand ) and joining with grey cement slurry @3.3 kg per sqm,including pointing in white cement mixed with pigment of matching shade complete. Jhonson/Kajaria/Bell

Providing and fixing white vitrous china wash basin with RS or CI brackets painted white ,15mm CP brass pillar tap and CP brass chain and rubber plug 32mm CP brass waste of stanard pattern 32mm diameter and waste pipe complete including cutting and making good the walls where required. Flat back wash basin size 550x400mm with one 15mm CP brass pillar pan. (Cera Cognac Model No.1011/ Hindware/Parryware). (Full cost)

Providing and fixing 600x450mm mirror of superior glass (approved quality) complete with 6mm thick asbestose sheet ground fixed to wooden cleats with necessary screws and washers.

Providing and fixing towel rail brackets fixed to wooden cleat with scerws and washers . (a) 600 x 20 mm CP brass towel rail with brackets 600mm long towel rail brackets with total length of 645mm width 78mm and effective height of 88 mm weighinig not less than 190 gms.

Providing and laying vitrified floor tiles Mat finished (premium quality ) in diffren sizes ( thickness to be specified by the manufacture ) with water absorbtion less than 0.08 % and confirming to IS: 15622 of approved make in all coulers and shades, laid 20mm thick cement mortar 1:4 ( 1 cement 4 P sand ) including grouting the joints with white cement and matching pigments etc.. complete.( flooring) ( Jhonson / Kajaria /Bell polished vitrified tiles of size 1200x800 mm

Providingand laying vitrified Mat finished (premium quality) indiffrensizes ( thickness to be specified by the manufacture ) with water absorbtion less than 0.08 % and confirming to IS: 15622 of approved make in all coulers and shades, in skirting,riser of steps,over 12 mm thick bed of cement mortar 1:3 ( 1 cement 3 P sand ) including grouting the joints with white cement and matching pigments etc.. complete. ( Jhonson/Kajaria/Bell polished vitrified tiles of size 1200x800 mm

Providing and fixing Coloured Semi corrugated Aluminium sheet roofing fixed with galvanized iron J or L hooks and 8mm dia C.I Plain bitumen washers complete excluding the cost of purlins,rafters and trusses corrugated sheet 0.56mm thick. including aluminium ridge sheet 0.56mm thick 60cm width. Ridges, hippes & vallays

Providing and fixing Precast slab Reinforced Cement concrete 1:1.5:3 ( 1cement,1.5M.sand,3G.chipps)including centring and shuttering and excluding the cost reinforcement.

Felling trees of girth (measured at a hight of 1 mtr above ground level)including cutting of trunks and branches removing the roots and stacking of serviceable materials and disposal of unserviceable materials. (a) Beyond 30 cms and upto 60 cm in girth

(b) Beyond 60 cms and upto 120 cm in girth

Cement concrete flooring 1 cement, 2 M.sand, 4 G.Chipps) finished with floating coat of neat cement includrry,but excluding the cost of noising of steps etc.Complete.40mm thick with 20mm nominal size stone aggeregate.

Providing and fixing G.I welded mesh 50x50 mm and 3mm thick in wooden frame with necessary screws including steel primer one coat and two coat s.e.paint on new work.(frame work paid by seperatly).

Providing wood work in frames of false ceiling, partitions etc.sawn and put up in position.

Providing and fixing plain bamboo board ceiling 4mm thick of approved quality with necessary nails etc including 40mmx12mm wooden beeding fixed with brass screws.also including finishing with french spirit polishing Two or more coat on new work.

Providing and fixing aluminium work for doors,windows,ventilators and partitions with extruded builtup standard tubular sections/appropriate Zsections and other sections of approved make conforming to IS:733 and IS:1285, fixed with rawl plugs and screws or Anodised aluminium (anodised transparent o rdyed tor equired shade according to IS:1868,Minimum anodic coating of Grade AC 15)

Providing and fixing aluminium work for doors,windows,ventilators and partitions with extruded builtup standard tubular sections/appropriate Zsections and othersections of approved make conforming to IS:733 and IS:1285, fixed with rawl plugs and screws or Anodised aluminium (anodised transparent o rdyed tor equired shade according to IS:1868,Minimum anodic coating of Grade AC 15)

Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade 1 Type II in panelling fixed in aluminium doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. Prelaminated particle board with decorative lamination on one side and balencing lamination on other side (Full cost)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): (Full cost)float glass pans 5.5mm thick

Providing and fixing Aluminium curtain rods with Aluminium brackets:20 mm dia (heavy type)

Providing 12 mm cement plaster CM 1:3 ( 1 cement 3 Plastering sand)with fting coat of neat cement

Providing half brick masondry in super structure above plinh level up to floor five level with CM 1:4 ( 1 cement 3 .M.sand)

Providing and fixing PVC half round gutter 200 mm dia ( 10 kg per sqcm) gutter fixed with M.S brackets

Providing and fixing nominal guage PVC Pipe of approved quality compleate with special flang compression type fittings including trenching and re filling etc. External work 90 mm nomina bore ( 6 kg per sqcm)

SAKEER HUSSAIN KI

SAMEER RIYAS

SHERIN ABDULLAH P

Associated Enterprises

K UMMERKOYA