Renewal Repair of internal wiring fittings and luminaries and connected items in Adm Domestic area at Mil Stn Dappar under GE (P) Dappar

Amount

Taking down carefully Copper/aluminium point wiring on wooden batten /pvc conduit /Pvc casing and capping (light/Socket/Power) complete including (Fittings such as switches, ceiling roses, pendants, regulators, sockets electric energy meters, light fittings, etc to be measured separately) removing materials to store and making good distrubed surfaces of walls. Floors etc to match with the existing including disconnection of ceiling/exhaust fan connection, complete all as specifed and directed by Engr-in charge.

Taking out existing sub main wiring of any description and size including earth wire incld wooden battens/ conduits/quities from stone/brick masonry walls, roofs, floors, etc. all as directed by Engr-In- Charge.

M& L Point wiring complete with 1.5 sqmm (nominal area) PVC insulated PVC unsheathed multistranded copper condutor single core cable 1100 volts grade, FRLSH, ISI marked drawn through and including heavy duty non metalic PVC conduit, ISI marked, not less than 20 mm dia of thickness 1.8 mm concealed in wall, roof, etc, with all connected fittings including pressed steel terminal boxes suitable for mounting modlar switches, sockets etc and including PVC insulated and unsheathed multistranded single core copper conductor cable of size 1.5 sq mm green in colour as in earth continuity conductor connected to common earth dolly and all metal parts of fittings as specified and directed for the following:- Note:- Switches , sockets, ceiling rose, regulators etc shall be measured and paid separately.Quoted rate is deemed to be inclusive of cost of cutting chases in wall for incorporting PVC conduit and cost for making good to existing wall with CM 1:4 not exceeding 10 cm grith & painting same so as to match the existing wall.

(a) One light / fan / Bell point controlled by one switch

(b) One light point controlled by two way switch

(c) One 5 pin socket outlet independent 5 Amps

(d) One socket outlet 5 Amps on the same board with other switches.

(e) One 6 pin 5/15 Amps socket outlet independent with 2.5 Sqmm size copper conductor cable and 1.5 sqmm copper cables as earth wire.

M&L Sub main wiring with 2 runs of single core FRLSH PVC insulated unsheathed multistranded copper conductor cable size of cable 2x4 sqmm (line conductor) & 1x2.5 sq mm (earth conductor). 1100 V grade drawing in & includingheavy duty non metalic PVC conduit, ISI marked, incl accessories not less than 25 mm in dia & concealed in wall, roof etc including PVC insulated, FRLSH unsheathed single core copper conductor cable, green in colour as in earth conductor including cutting charges for concealed conduit wiring etc and making good cutting not exceeding 10 cm grith complete all as specified and directed. Note : (i) Two runs of copper conductor cable and one run of copper earth wire including PVC conduit will be measured and paid as one unit only. (ii). Suitable size cable lugs copper fabricated will be measured in the quoted rate only. (iii). Cost of cutting chases in wall for flush fitting of DB and making good to wall with CM 1:4 and painting the same in order to match the same with the existing wall all to the satisfaction of Engr-In- Charge is deemed to be included in the quote rate.

All as per above but in existing PVC conduit with 2x1.5sqmm Copper wire and 1 x 1.5 sqmm FRLSH PVC insulated unsheathed multi standed copper conductor.

S&F Modular switch 1 way 6 A, 1 module type single pole 240 volts and complete all as specified and directed by the Engr-in-charge Make : Hager Insysta/Legrand Asteor/Seimens/Schenider Zencelo.

S&F Modular switch 2 way 6 A, 1 module type single pole 240 volts and all specified Make : Hager Insysta/Legrand Asteor/Seimens/Schenider Zencelo.

S&F Modular socket 6Amps 2/3 pin combined 2 module 240 Volts complete all as specified and directed by the Engr-in-charge Make : Hager Insysta/Legrand Asteor/Seimens/Schenider Zencelo.

S&F Modular socket 6/16Amps 2/3 pin combined 2 module 240 Volts complete all as specified and directed by the Engr-in-charge Make : Hager Insysta/Legrand Asteor/Seimens/Schenider Zencelo.

S&F Modular Bell push 6 Amps 1 module 240 volts and all sepecified Make : Hager Insysta/Legrand Asteor/Seimens/Schenider Zencelo.

S&F Modular Fan step regulator, 120 w-2 module 240 volts and complete all as specified and directed by the Engr-in-charge Make : Hager Insysta/Legrand Asteor/Seimens/Schenider Zencelo.

S&F White cover plate with frame 2 module 240 volts complete all as specified and directed by the Engr-in-charge Make : Hager Insysta/Legrand Asteor/Seimens/Schenider Zencelo.

S&F White cover plate with frame 4 module 240 volts and complete all as specified and directed by the Engr-in-charge Make : Hager Insysta/Legrand Asteor/Seimens/Schenider Zencelo.

S&F White cover plate with frame 6 module 240 volts and complete all as specified and directed by the Engr-in-charge Make : Hager Insysta/Legrand Asteor/Seimens/Schenider Zencelo.

S&F White cover plate with frame 8 module 240 volts andcomplete all as specified and directed by the Engr-in-charge Make : Hager Insysta/Legrand Asteor/Seimens/Schenider Zencelo.

S&F Modular Metal Box 1 mm thick 2 module and complete all as specified and directed by the Engr-in-charge Make : Hager Insysta/Legrand Asteor/Seimens/Schenider Zencelo.

S&F Modular Metal Box 1 mm thick 4 module and complete all as specified and directed by the Engr-in-charge Make : Hager Insysta/Legrand Asteor/Seimens/Schenider Zencelo.

S&F Modular Metal Box 1 mm thick 6 module and complete all as specified and directed by the Engr-in-charge Make : Hager Insysta/Legrand Asteor/Seimens/Schenider Zencelo.

S&F Modular Metal Box 1 mm thick 8 module and complete all as specified and directed by the Engr-in-charge Make : Hager Insysta/Legrand Asteor/Seimens/Schenider Zencelo.

Supply and fixing in replacenment Modular Angle holder Cat Pat NO 33958 of Anchor Equivalent/Havells/SSK with insulated body with back plate for LED lamps all as specified and directed by the Engr-in-charge .

Supply and fixing in replacenment LED lamp 9watt, retrofit all as specified and directed by Engr-in-charge complete.

S&F in replacenment LED tube light fittings 1 x 20 W, 230V, complete with all accessories internally prewired and including connecting up with twisted flexible PVC copper conductor cable of 23/0.0076 from ceiling rose all as directed by Engr-In- Charge.

Supply and fixing in replacenment ceiling rose bakelite, 63.5mm 3 terminals with base plate ISI marked, complete all as specified and directed by Engr-in-Charge.

S&F Sheet metal enclosure MCB TPN distribution board, double door, IP 43 class, including suitable size copper bus-bar, 240V, 6 Way with shrouded neutral bar, earth bar and incld. cable ties and suitable size blanks, including taking down of existing sheet metal enclosure complete all as specified and directed. NOTE - (a). Cost of suitable size cable lugs and materials required for flush fixing of DB is deemed to be included in the quoted rate. (b). Cost of cutting chases in wall for flush fitting of DB and making good to wall with CM 1:4 and painting the same in order to match the same with the existing wall all to the satisfaction of Engr-In- Charge is deemed to be included in the quote rate. Make : Legrand EKINOX/Hager NCN/Seimens Betaguard/Schenider Acti 9.

Supply and fixing in replacenment MCB SP 6 -32 Amps,10 KA,,'C' series 240 V ISI marked.complete all as specified and directed by Engr-in-Charge. Make : Legrand EKINOX/Hager NCN/Seimens Betaguard/Schenider Acti 9.

S&F Sheet metal enclosure MCB SPN distribution board, double door, IP 43 class, including suitable size copper bus-bar, 240V,8 Way with shrouded neutral bar, earth bar and incld. cable ties and suitable size blanks, including taking down of existing sheet metal enclosure complete all as specified and directed. NOTE - (a). Cost of suitable size cable lugs and materials required for flush fixing of DB is deemed to be included in the quoted rate. (b). Cost of cutting chases in wall for flush fitting of DB and making good to wall with CM 1:4 and painting the same in order to match the same with the existing wall all to the satisfaction of Engr-In- Charge is deemed to be included in the quote rate. Make : Legrand EKINOX/Hager NCN/Seimens Betaguard/Schenider Acti 9.

Supply and fixing in replacenment MCB 4 Pole 40 Amps,10 KA 'c' series 240 V ISI marked.complete all as specified and directed by Engr-in-Charge. Make : Legrand EKINOX/Hager NCN/Seimens Betaguard/Schenider Acti 9.

Supply and fixing in replacenment MCB SPN 40 Amps, 10 KA 'c' series 240 V ISI marked.complete all as specified and directed by Engr-in-Charge. MAke: Legrand/ABB/Schenider

Supply and fixing in replacenment mirror light fitting LED 10W, 230 V, 2ft all as per Crompton Make Cat No. - LCL-14-CDL or equivalent in Philips/Wipro complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacenment modular electronic ceiling fan regulator , rotary/socket step type suitable for 220-280 V AC 50 Hz supply including all electrical connections complete as specified and as directed.

M&L for Taking down ceiling fan and connected cables removinginto safe place and Re-Fixing ceiling fan and connecting up including provision of cable from ceiling rose to fan complete all as specified and directed by Engr-in-Charge.

S&F MCCB 4 pole 63 Amps, 415 V,16 KA suitable for TPN DB as specified in Sch A Item No. 23 above all as specified and directed by Engr-in-Charge. Make : Legrand/ABB/Schenider

M&Lin replacenment bell Ding Dong AC, 230 V single pole all as specified

M& L Earthing complete by using GI wire as earthing lead and MS galvanized earth plate of size 60 cm x 60 cm x 6.3 mm as earth electrode surrounded by charcoal and salt, buried directly in ground vertically in pit of depth not less than 2.25 meter below the ground with top edge of the earth plate at a depth of less than 1.5 mtr below ground level surounded from all sides with mixture of charcoal dust and common salt in alternate layers and electrode connected to galvanized iron wire 4 mm dia by means of bolts, nuts, checknuts and washers of galvanised iron connected iron connected to main switch board or main control board all as shown in electrical plate No 3 of SSR 1991. Pt I and including necessary exc. and earth work. The rate also include testing, 20mm bore light grade GI pipe for watering, funnel, wire mesh, PCC chambers in cement concrete (1:3:6) type CI 40 mm thick RCC(1:2:4) type B-1 cover and CI frame etc.complete all as specified and directed by Engr-in-Charge.

Removing existing unserviceable DBs along with its enclosures old wiring in between DB's/main switch/meter & S & F factory fabricated sheet metal enclosures wall mounted type DB of size 1.25 m x 1.0m x 0.25m with 2mm thick CRCA sheet and applying two coats of synthetic enamel paint over one coat of red oxide zincchrome primer suitable to accommodate and comprising of following :-

(a) Removing and re-fixing electric meter -4 Nos.

(b) (i) One number MCB DB 4 way TPN single door with one No incoming 40 Amp TPN 10 KA - 04Nos, MCCB -63Amps (ii) Blank plates - 03 Nos

(d) Rewiring with PVC insulated unsheathed ISI marked 2 run 6 sqmm and single run of 1.5 sqmm as earth continuity copper conductor cable fixed to meter box with PVC tag connected in between DB's SPN electric meter etc complete all as specified and directed.

S&F LED building security light, pressure die cast aluminum housing, 15 watts capacity, 240V, IP 65 class, with suitable in-built electronic driver complete incld. fixed on a bracket made out of 1.5 mtr long Med grade GI pipe 40 mm dia bend to shape as directed fitted on wall at a height not less than 6 mtr from ground with MS clamp, nuts and bolts and washers as required at site and incld. connecting luminarie to the nearest ceiling rose/junction box with 1.5 sqmm PVC insulated 3 core wire complete all as directed and specified by Engr-in-Charge of make Crompton Greaves cat part no - LSTS-15-CDL OR Equivalent in Philips/Wipro. NOTE - Cost of all minor spares and jobs required for fixing of light fixture on wall and for electrical connections are deemed to be included in the quoted rate.

Supply & Fix in replacement only Rigid non meatalic PVC conduit heavy duty 25mm dia ISI marked with all accessories and fittings on surface of wall, ceiling and making good disturbed surface of wall to match the existing surface, complete all as specified and directed by Engr-in-Charge. Make : Kalinga/ Diplast.

sanjeev electricals

NAVREET CONSTRUCTION

R D Bansal