Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹87.0 LAccepted-AOC | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹96.7 L+₹7.1 L (7.98%)Rejected-Finance B 101 3RD FLOOR JHILMI COLONY DELHI 110095 | DELHI | EAST DELHI | DELHI | 110095 | L2 | Rejected-Finance OTHER THAN LOWEST |
Tender Value
₹86 L
EMD Value
₹1.5 L
Closing Date
3 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE NEW DELHI
HQ CWE NEW DELHI RAO TULA RAM MARG DELHI CANTT 10
PROVN OF CONFERENCE HALL AND WELFARE OFFICE INCLUDING ALLIED SERVICES IN KASHMIR HOUSE UNDER GE (NEW DELHI), New Delhi - 21
2022_MES_559601_1
CWE/ND-27/2022-23
Open Tender
Miscellaneous Works
Item Rate
120 days
New Delhi
Please refer tender documents
9 documents required · 9 mandatory
₹1,000
GE NEW DELHI
₹1.5 L
Yes
19 Dec 2022
22 Oct 2022
5 Dec 2022
22 Oct 2022
3 Dec 2022
19 Nov 2022
Amount
Surface dressing not exceeding 15cm deep as in hard/dense soil complete all as specified and directed.
Excavating in trenches not exc 1.5 mtr wide and not exc 1.5 mtr in depth; for foundation etc. and getting out as in Soft/ loose soil complete all as specified and directed.
M & L for PCC 1:4:8 type D-2 (Using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.
M & L for brick work with subclass ‘B’ bricks using old size brick, straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and directed.
Returning filling in, including Spreading, levelling, watering and well ramming in layers n. exc 25cm thick in soils complete all as specified and directed.
M&L for removing excavated material to a distance exc 1.50KM but n exc 5 KM and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.
M & L for reinforced cement concrete M-25 (design Mix) using 20mm graded stone aggregate as in foundation, plinth beams, footings and mass concrete etc., complete all as specified and directed.
M & L for reinforced cement concrete M-25 (design Mix) using 20mm graded stone aggregate as in columns etc. complete all as specified and directed..
M & L for treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and directed.
M & L for treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) complete all as specified and directed.
M&L for use and waste of formwork for sides of columns, rough finished, rectangular, square or polygonal complete all as specified and directed..
M&L for use and waste of formwork for foundation beams etc., for rough finished, flat surfaces complete all as specified and directed.
M & L for TMT bar 6 to 8mm dia cut to length bent to shape required including cranking bending spirally for column, hooking ends & binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed.
M & L for TMT bar 10mm dia and over cut to length bent to shape required including cranking bending spirally for column, hooking ends & binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and as directed.
M&L for 15mm thick Ready mix plaster on brick work or concrete surfaces of wall (External surface) finished even and smooth complete all as specified and as directed.
M&L for preparing surfaces as wall new plastered or unplastered and applying two coats of weather proof exterior 100% acrylic premium emulsion over and including a coat of primer on wall surfaces complete all as specified and directed.
M & L for One coat of bitumen blown any grade, applied hot, to concrete surfaces at the rate of 1.2 kg per Sqm complete all as specified and directed.
M & L for Polythene film, black, 50 micron laid in floors complete all as specified and directed.
M&L for Sand filling under floors including watering and consolidation as required complete all as specified and directed.
M & L for hard core of broken stone or boulders of gauge not exceeding 63 mm deposited, spread and levelled in layers n. exc 15cm thickness, watered and rammed to a true surfaces in broken stone complete all as specified and directed.
M & L for 100 mm thick Cement concrete type D 2, 1:4:8 (using 40 mm graded stone aggregate) in sub base of flooring/ hard standing complete all as specified and directed.
M & L for 75 mm thick plain cement concrete 1:3:6, type C-2 (using 40 mm graded stone aggregate) as in plinth protection etc., finishing cement concrete surface even and smooth without using extra cement complete as specified and directed.
Designing, providing, installing and fixing factory finished custom designed cold form Light Gauge Steel Framed super structure, design vetted/ approved by any IIT/NIT comprising of steel wall panel, trusses, purlins etc. manufactured out of 0.75 mm to 1.20 mm thick steel sheet as per design requirements. The steel sheet shall be galvanized (AZ-150 gsm Aluminum Zinc Alloy coated steel having yield strength 300- 550 Mpa) conforming to AISI specifications and IBC 2009 for cold formed steel framing and construction and also as per IS: 875- 1987 , IS 800- 1984 (Code of practice for general construction in steel) and IS: 801- 1975 (Code of Practice for Use of Cold Formed Light Gauge Steel Structural Members In General Building Construction). The wind load shall be as per provisions of IS 875 (part -III). LGSF frame shall be designed as per IS: 801 using commercially available software such as Frame CAD Pro-11.7/ STAAD PRO-V8i/ArchitekV2.5.16/ Revit architecture 2011/Pinnacle or equivalent. The framing section shall be cold form C-type having minimum web depth 89 mm web x 41 mm flange x 10mm lip in required length as per structural design requirement duly punched with dimple/slot at required locations as per approved drawings. The slots will be along centre line of webs and shall be spaced minimum 250 mm away from both ends of the member. The frame can be supplied in panelised or knock down condition in specific dimensions and fastened with screws extending through the steel beyond by minimum of three exposed threads. All self drilling tapping 168 screws for joining the members shall have a Type II coating in accordance with ASTM B633(13) or equivalent corrosion protection of gauge 10 & 12, TPI 16 & 8 of length 20mm. The frames shall be fixed to RCC slab or Tie beam over Neoprene rubber using self expanding carbon steel anchor bolt of dia as per approved drawings, design subject to minimum 12 mm diameter and 121 mm length conforming to AISI 304 and 316 at 500 mm c/c with minimum embedment of 100 mm in RCC and located not more than 300 mm from corners or termination of bottom tracks complete in all respects. complete all as specified and as directed Note:- Firms approved by E-in-C's branch for LGSF structure: (a) M/S NIPANI INFRA & INDUSTRIES PVT LTD (b) M/S EPACK POLYMERS (P) LIMITED
External Walls:- External wall system on Light gauge steel frame work with Outer face Plank on 9 mm thick heavy duty fibre cement board confirming to IS 14862:2000, category IV type A (High pressure steam cured) as per standard sizes fixed with self-drilling / taping screws / fasteners @ 60cm c/c of approved make. A grove of 2 mm to 3mm shall be maintained and groves shall be sealed with silicon based sealant. The board shall be fixed in a staggered pattern. Screws shall be of counter sunk rib head of 1.60mm to 4 mm thick of 8 to 10 gauge of length varying from 25 to 45 mm, 7μm thick aluminium foil on external walls of steel frame work as Vapour Barriers, Rockwool insulation of 50 mm with 48 Kg/m³ density and internal face 12.5mm thick gypsum plaster board fixed on 8mm thick fibre cement board confirming to IS 14862:2000 of category III type B (High pressure steam cured) as per standard sizes fixed with self-drilling / taping screws / fasteners @ 60cm c/c of approved make, proper taping and jointing to be done using fibre mesh tape and epoxy and acrylic based jointing compound for seamless finish. The cement board shall conform to IS:14862 Density 1250 kg/cum. Internal wall :- The internal wall structure for LGSF building shall be of composite material. Composite internal wall shall consists of external 12.5mm thick Gypsum board & Cement fibrous board 8mm thick Category III type B as first layer and Rockwool insulation of 50 mm with 48 Kg/m³ density and an air cavity and 8mm cement board with outer 12.5mm Gypsum board on inside surfaces. Gypsum boards shall be fixed to main LGSF structure framing using wafer head steel screws. The wall panel shall terminate at the bottom of floor and embedded in flooring of minimum 10mm. Wet Area Walls:- Wet area wall on Light gauge steel frame work with Outer face having 9 mm thick heavy duty fibre cement board confirming to IS 14862:2000, category IV type A (High pressure steam cured) as per standard sizes fixed with self-drilling / taping screws / fasteners @ 60cm c/c of approved make. A grove of 2 mm to 3mm shall be maintained and groves shall be sealed with silicon based sealant. The board shall be fixed in a staggered pattern. Screws shall be of counter sunk rib head of 1.60mm to 4 mm thick of 8 to 10 gauge of length varying from 25 to 45 mm.
M&L for 9 mm thick heavy duty fibre cement planks category IV type A (High pressure steam cured) on external wall of approved colour and fixing as specified in Ser Item No 24.00 here-in-before complete all as specified and directed.
M&L for 9 mm thick heavy duty fibre cement board category IV type A (High pressure steam cured) on the outer face of external wall and wet area and fixing as specified in Ser Item No 24.00 here-in-before complete all as specified and directed.
M&L for 7μm thick aluminium foil on external walls of steel frame work, on outer face side as Vapour Barriers specially designed for this frame works complete all as specified and directed.
M&L for Rock Wool Insulation 50 mm thick mineral wool (density 48 kg/Cum) insulation to be used as filler between the outer and inner skin of the walls complete all as specified and directed
M&L for 12.5 mm Gypsum Board as on inner face of external wall and both faces of internal walls and fixing as specified in Ser Item No 24.00 here-in-before complete all as specified and directed
M&L for 8 mm thick Fibre Cement Board of category III type B (High pressure steam cured) as on inner face of external wall and both faces of internal walls and fixing as specified in Ser Item No 24.00 here-in-before complete all as specified and directed
M&L for 9 mm thick Heavy Duty Fibre Cement Board category IV type A (High pressure steam cured) in Soffit & Eaves and fixing as per manufacturer's instructions complete all as specified and directed
M&L for factory made prefabricated sandwich PUF panel 50 mm thick insulated roofing sandwich system comprising of PUF insulation of density 40 + 2 kg/m³ and 0.5 mm thick (TCT) Pre-coated galvalume sheet(150 gsm zinc-aluminium alloy coating total of both side) having 550 Mpa yield strength outside and inside surface. The top sheet shall be high ribbed in trapezoidal shape and bottom sheet shall be Micro Ribbed 0.5 mm thick(TCT) Pre-coated galvalume sheet (150 gsm, zinc-aluminium alloy coating total of both side) having 550 Mpa yield strength sheet. The top side of the roof panels shall have 30 mm crest at 200 mm centre to centre pitch with a flute for capillary action in full length on one side of the crest portion, so as to prevent the water leakages in the event of valley filled with water. The top edge of the panels shall have overlap joinery systems. The colour of the top side sheet will be as approved by GE of 20-30 microns Pure Polyester coating over 4-7 microns Primer on the top side and 5 microns of backer coat over the primer on the bottom side of the sheet. The roof panels shall be screwed to purlins with SDST (Self Drilling and Self Tapping) screws. The effective covering width of the panel shall be of 1000 mm and length of the panels shall be to suit as per site or as per transportable length. These panels are factory assembled in Dis-continuous manufacturing line into a complete unit to eliminate the necessity of field assembly of units prior to installation. PUF panel shall be BMTPC approved complete all as specified and as directed.
M&L factory made UPVC Sliding window of approved colour Three track made of extruded profiles with wall thickness of 2.3 mm (+ -0.2 mm). Window profile with hollow section with multi chamber. Frame (88 mm x 52 mm), sliding sash (42 mm x 67 mm). Sliding mesh Sash (42 mm x 57 mm) Sliding interlock (One vertical length in each shutters) (45.5 mm x 28 mm), Glazing bead (24.5 mm x 16 mm) will be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2 mm thick galvanised steel Frame (30 mm x 18 mm) 2 nos, sliding sash (30 mm x18mm), sliding mesh sash (26 mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100 mm long fasteners, including hardware [Touch Lock of zinc alloyed (white powder coated), including steel roller system and including stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and 5.5mm thick sheet glass and required accessories complete all as specified and as directed.
M&L for white Laminated 12 mm thick Gypsum board fixing on Gl frame work of grid size 605x605mm for seamless ceiling comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx. 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre Hangers 6 mm dia. G.I. (up to 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60 mm long and expansion hold fasteners 12.5mm dia. 40 mm long including cove 450 mm all around the room complete all as specified and directed. Note :- Area of the room shall be measured for payment of ceiling including cove. No separate payment shall be made for providing cove.
M&L for white Laminated 12 mm thick Gypsum board fixing on Gl frame work of grid size 605x605mm for seamless ceiling comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx. 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre Hangers 6 mm dia. G.I. (up to 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60 mm long and expansion hold fasteners 12.5mm dia. 40 mm long complete all as specified and directed.
M&L for providing and fixing False ceiling at any height with semi perforated 12 mm thick micro tegular edge GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of size 595x595mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC 0.85 (with 50 mm thick glass wool) as per IS 8225 :1987, Non-combustible as per BS 476 (part-4) -1970 and light reflectance of 75-85% to be laid in true horizontal level or in slope as per site requirement suspended on interlocking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanised @ 120 grams per sqm including both sides) Comprising of main - T runners of size 15x32mm of length 3000 mm, cross-T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 m of length 600 mm to from grid module of size 600x600mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod up to 1000 mm length and L shape level adjuster of size 85x25x2mm. Galvanized iron perimeter wall angle of size 24x24x0.40mm of length 3000 mm to be fixed on periphery wall/partition with the help of plastic rawl plugs at 450 mm centre to centre and 40 mm long dry wall SS screws. The work shall be carried out as per specifications and as per direction of Engineer-in-Charge complete all as specified and directed
M&L for GI powder coated micro perforated micro look false ceiling with fleece lay- in- type 0.50mm thick, suitable for grid/frame module of 600mmx600mm size complete comprising GI powder coated grid consisting of T runner 15mm suspended at 1200 mm centre to centre and cross T runner of 15mm size suspended at 600 mm centre to centre suspended by 4mm GI rod from roof slab including steel fastener wall angle and T with interlocking arrangement as required for framing grid suitable for module size 600x600mm ceiling etc. complete all as specified and directed.
M&L for vitrified ceramic tiles 10 mm thick(Square/Rectangular) polished Double charged dark shade area of each tile exceeding 0.42 sqm but not exceeding 1.00 sqm in floors etc. set and jointed in neat cement slurry and pointed in white of coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:4.
M&L for wooden flooring, laminated wooden type made of high density fibre board (HDF), comprising of tongue and groove interlocking type of planks of 1210 x 193 mm size 8mm thick, commercial grade, abrasion resistance of AC-II category, over and including 6 micron polyethylene and foam cushion sheeting over the concrete surface to minimize moisture migration from the concrete including all fixing material i.e. chemical adhesive, base strip/fillets etc. veneered and matching top beading etc. complete all as specified and directed.
M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:4 complete all as specified and directed.
M&L for glazed ceramic tiles in vertical surface of size 600X300X7 mm on vertical surface of wall over 1st layer of Heavy Duty Fibre Cement board with the help of adequate tile fixing adhesive, finishing, cleaning etc complete. Joints to be finished with tile grout with matching pigment etc. complete all as specified & directed. Note :- Fiber cement board shall be measured and paid seprately.
S & F PVC wall panelling shall be laminated plastic section SPUF-144 of size 250 mm x 6 mm with distance between the supporting ribs not exceeding 19 mm including necessary cutting for electrical fitting as per site requirement fitted on existing steel frame complete all as specified and directed.
M&L for best quality wall paper on wall applying with necessary adhesive including matching corners and angles complete all as specified and directed. Make : E Shades/ E Mantra/ Stellar
M&L for preparing surfaces as wall new plastered or unplastered and applying two coats of plastic emulsion paint over and including a coat of primer on wall surfaces complete all as specified and directed.
M&L for preparing surfaces on ceiling new plastered or unplastered and applying two coats of plastic emulsion paint over and including a coat of primer on ceiling surfaces complete all as specified and directed.
M&L for valley gutter of 0.5 mm TCT Plain Pre Painted galvalume sheet at the slope side and Down spouts of PVC of 100 mm dia. at both the ends and at the intermittent intervals of the building on the slope sides complete all as specified and directed.
M&L for 18 mm thick gang saw cut granite, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facia and similar locations of required size, approved shade, colour and texture laid over and including 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. complete all as specified and directed
S&F wash hand basin vitreous china white, wall hung of size 585x450x220 mm with full pedestal including fixing accessories, SS coupling and waste pipe complete all as specified and directed. Make : JAQUAR CAT Part No: FHT-5801/ HINDWARE CAT Part No – 10100 & 11003/ PARRYWARE CAT Part No – C0491 & C0377
S&F 15mm bore Brass chromium plated single lever wash hand basin pillar cock quarter turn complete all as specified and as directed. Make : JAQUAR CAT Part No: OPP-15001PM/ HINDWARE CAT Part No – F380005/ PARRYWARE CAT Part No – G3102A1
S&F 15mm bore brass chromium plated bib cock with wall flange all as specified and directed. Make : JAQUAR CAT Part No: CON-107N/ HINDWARE CAT Part No – F400002/ PARRYWARE CAT Part No – G3104A1,
S&F 15 mm bore chromium plated fancy type brass angular stop cock with wall flanged screwed down high pressure screwed both ends for iron pipe or for unions complete all as specified and directed. Make : JAQUAR CAT Part No: OPP-CHR-15053PM/ HINDWARE CAT Part No – F460005/ PARRYWARE CAT Part No – G3153A1
S&F 15 mm bore brass chromium plated TWO way bib taps with knob to operate, complete all as specified and directed. Make : JAQUAR/ HINDWARE/ PARRYWARE
S&F PVC connections 15 mm X 600 mm with PTMT nuts complete all as specified and directed.
S&F cast copper alloy chromium plated health faucet with 1.0 mtr flexible pipe 15mm as approved complete all as specified and directed. Make : JAQUAR/ HINDWARE/ PARRYWARE
S&F 15mm bore of medium grade galvanised steel tubing with all fittings and fixed complete to wall complete all as specified and directed.
S&F 20mm bore of medium grade galvanised steel tubing with all fittings and fixed complete to wall or laid in floor complete all as specified and directed.
S&F for snow white vitreous china EWC single piece type 360x640x685 mm including PP Soft Close seat cover, Hinges, Dual flush cistern fittings, fixing accessories, S trap fittings complete fixed in floor with brass screw complete all as specified and directed. Make : JAQUAR CAT Part No: SLSWHT-6851S110P/ Parryware CAT Part No – C841D(S-305)/ Hindware CAT No – 92562(S-220)
S&F chromium plated box type toilet paper holder, fixed to wall with chromium plated brass screws complete all as specified and directed.
S&F chromium plated soap dish fixed to wall with brass screw complete all as specified and directed .
S&F brass chromium plated towel ring square with round flange fixed with and including chromium plated brass screws and wooden /plastic cleats complete all as specified and directed . Make :- JAQUAR CAT Part No: AKP 35721P/ Parryware Cat Part No – T6402A1/ Hindware CAT Part No – F450023”
S&F brass chromium plated tubular towel rails 20 mm dia D type ,60 cm long between flanges complete all as specified and directed.
S&F Stainless steel (Gd-304) sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size915mmx460mm with bowl size 410 mm x330mm x 160 mm complete all as specified and directed.
S&F CP openable type brass grating 125 mm size square or rounded etc. fixed with cement complete all as specified and as directed.
S&F PVC (SWR) 75 mm bore pipes single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.
S&F PVC (SWR) 110 mm bore pipes single socketed in any length with rubber ring joints, laid in trenches or in floors/ to wall with necessary clamp complete all as specified and as directed.
M&L for PVC (SWR) multi floor trap dia of outlet in mm with grating jointing with solvent cement complete all as specified and directed.
S&F 18 mm thick MDF board pre laminated both side fixed with aluminium screws as in storage cabinet/cub board including all fittings fixtures and builder hardware etc. and the edges shall be covered with PVC banding tape complete all as specified and as directed. working station etc. .
S&F aluminium powder coated grill (DECO grill DG 103 of 10mm thick of M/s ELESAR, M/s Royal Grill, M/s National Grill Associated profiles & Aluminium Ltd) fixed with suitable ‘F’ section (No 8584) 15.30 x 23.40 x 1.40 mm (minimum), fabricated and riveted to aluminium window / ventilators complete all as specified and directed.
S&F ROLLER blinds vertical type 100% polyester(Translucent) wt 230 gm/Sqm made out of fabric cloth of approved shade fixed as per the instructions of manufacturers, complete all as specified and directed.
Demolition of Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.
M&L for PU Coated Machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigment confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and directed.
M&L for Sand filling under floors tiles including watering and consolidation complete all as specified and directed.
M & L for Plain Cement Concrete Type B1 1:2:4 (using 20 mm graded stone aggregate) cills plinth courses, copings, bed plates and the like including weathering, slightly rounded or chamfered angles and throating as directed including necessary form work complete all as specified and directed.
Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out in hard/dense soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm as in hard/dense soil complete all as specified and directed.
M&L for PCC 1:3:6 type C-2 using 40 mm grade stone aggregate as in foundation complete all as specified and directed.
S&F to Joist, channel, angle, or tee sections, confirming to Fe 410W gde 250 A quality fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) including necessary scaffolding of height up to 2 storey complete all as specified and directed.
M&L for preparation of new steel surfaces over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paints over and including one coat of red oxide primer complete all as specified and as directed.
S&F for 23-24mm thick PVC Jallies CNC machine cut as per the approved pattern and design as sample kept in GE Office. The PVC Jallies shall be fixed with the help of screw/nut bolt of suitable size and numbers as decided by the Engr-in-Charge. PVC Jallies shall be fixed to the existing steel frame work after replacing of rusted steel including necessary welding work complete all as specified and as directed. Note : MS steel work will be measured and paid separately under relevant item of BOQ.
M&L for 300x300x10mm thick heavy duty vitrified tiles set in over and including 15mm thick cement mortar (1:6) including filling joints with white or colour cement complete all as specified and directed.
M&L for PVC (SWR) bends any radius 110 mm complete all as specified and directed.
M&L for PCC (1:3:6) type C-2 (using 40 mm graded crushed stone aggregate) as in bed including packing under & haunching against side of PVC( SWR)pipe 110 mm bore after they are laid & tested complete all as specified and as directed.
M&L for Cutting into existing manholes for connecting new drains , making good to pipe and rendering , cutting out existing benching for forming branch channel (1/2 round or ¾ round) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as reqd for 110 mm dia pipe complete all as specified and directed.
M&L for cement concrete type C-2 1:3:6 (40 mm graded agg) as in surface channels, drains complete all as specified and directed.
S&F for precast RCC 1:2:4 manhole covers slabs any size , thickness with 3 mm thick FI around cover slab including with frame and reinforcement as per manufacturers design complete all as specified and directed.
M&L for Extra for forming fair finished drain or drain channel 30 cm inner girth in cement concrete using extra cement including forms moulds mitred stopped ends etc. complete all as specified and directed.
M&L for add or deduct over item 83 for each 25 mm girth or part thereof over or under 30 cm inner girth
Material and labour for point wiring with PVC insulated unsheathed multi stranded, single core, FRLS, copper conductor cable of size 1.5 sqmm 1100 Volts including one run of PVC insulated unsheathed multi stranded, single core, FRLS , copper conductor cable of size 1.5 sqmm as earth continuity conductor connected to common earth dolly drawing in and including PVC concealed conduit including provision of galvanised modular concealed box with suitable back & front plate for housing the modular switches, sockets & fan regulators for the following :- Note : - PVC conduit must be laid during LGSF structure framing only.
One light/fan point controlled by one No., one way switch Complete all as specified and directed.
One 6 Amp socket outlet point controlled by one No., one way switch on same board complete all as specified and directed.
One 6 Amp socket outlet point controlled by one No., one way switch on independent board complete all as specified and directed.
One bell/ buzzer point controlled by one push button on independent board complete all as specified and directed.
Material and labour for point wiring with PVC insulated unsheathed multi stranded, single core, FRLS, copper conductor cable of size 2.5 sqmm 1100 Volts including one run of PVC insulated unsheathed multi stranded, single core, FRLS , copper conductor cable of size 2.5 sqmm as earth continuity conductor connected to common earth dolly drawing in and including PVC concealed conduit including provision of galvanised modular concealed box with suitable back & front plate for housing the modular switches, sockets & fan regulators for One 16 Amp socket outlet point controlled by one No., one way switch on independent board complete all as specified and as directed. Note : - PVC conduit shall be laid during LGSF structure framing only.
S&F coloured modular switch matching with the colour scheme one way 6 Amp, SP, one module 230 volts AC complete all as specified and as directed.
S&F coloured modular switch matching with the colour scheme one way 16 Amp, SP, one module 230 volts AC complete all as specified and as directed.
S&F coloured modular socket outlet matching with the colour scheme 2/3 pin combined 6 Amp, 230 volts two module AC complete all as specified and as directed.
S&F coloured modular socket outlet matching with the colour scheme 2/3 pin combined 6/16 Amp, 230 volts two module AC complete all as specified and as directed.
S & F coloured Modular Bell push matching with the colour scheme 6A 1 module complete all as specified and as directed.
S&F coloured modular type electronic fan step regulator matching with the colour scheme 120W, modular type 2 module complete all as specified and as directed.
S & F bollard light 8 watt LED ,metallic type of 2 feet length water proof and rust resistance complete all as specified and directed.
S & F 15 watt warm white downlighter recess mounted ,white colour PVC body aluminium powder coated suitable to give glare free lights complete all as specified & directed make :Philips Cat part No 15WRWW2/ Havells Cat part No 15WDL/ Bajaj Cat part No BPSLR15WWH complete all as specified and as directed.
S & F 12 watt warm white downlighter recess mounted white colour PVC body aluminium powder coated suitable to give glare free lights complete all as specified and directed Make: Philips Cat part No 59137/ CG Cat part No LSDRM-12W-WW/ Havells Cat part No 9 WDL complete all as specified and as directed.
S&F warm white picture lights 8 watt white colour pvc body aluminium powder coated suitable to give glare free lights complete all as specified and directed.
S&F 28W LED Warm White Strip LED Light with driver, each Pack of 5RM, suitable to put under cove and give glare free lights complete all as specified and directed. Make :- Philips Cat part No 59439/ Jaguar Cat part No WW LSTP03X005XW/ Wipro Cat part No DF72827
Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed. Make :CG Cat part No LCPL-36W-CDL/ Polyvab Cat part No PCGLLL36 57/ Jaquar Cat part No JQM-WHT-LSKL01S036XC
S & F HANGING TABLE LAMP 9 watt LED made of PVC body and metallic finished paint ,equipped with spring type hanging wire and roller to adjust the height of the light complete all as specified and directed.
S & F Buzzer, Ding Dong AC. 230 volts, single pole complete all as specified and as directed.
S & F engagement light led type RED and green set of two bulb fixed into metallic box and visible through a transparent glass fixed on the front facing of the box complete all as specified and directed.
Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300 mm complete all as specified and as directed. Make : Bajaj Cat part No B00IW09Z5Q/ CG Cat part No -B00k838ZNS/ Havells Cat part No B00B4BC8TU.
M & L for Sub main wiring with 2 run of 6 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in to & including PVC conduit with and including 6 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB to sub main DB complete all as specified and directed. Note :-(i) Two run of 6.0 sqmm copper conductor cable, one run of 6 sqmm copper cable and one run of PVC conduit shall be measured as one unit length. (ii) PVC conduit shall be laid during LGSF structure framing only.
M & L for Sub main wiring with 2 run of 4 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in to & including PVC conduit with and including 4 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB to sub main DB complete all as specified and directed. Note :- (i) Two run of 4.0 sqmm copper conductor cable, one run of 4 sqmm copper cable and one run of PVC conduit shall be measured as one unit length. (ii) PVC conduit shall be laid during LGSF structure framing only.
Supply and fix factory made concealed sheet steel distribution boards, double door, SPN, 8 way, 230 volts AC, IP 43 with suitable busbar, neutral link, earth link suitable for MCB, DP/SPN as incomer & MCB SP as outgoing complete all as specified and directed. Make : Legrand Cat part No 507611/ Havells Cat part No B07BH526RO/ Indoasian Cat part No 811807”
Supply and Fix factory made 8 way load line DB with 125 Amp MCCB TPN, double door made out of CRCA mild steel sheet with insulating materials like polyester epoxy coated surface mounting 8 way TPN 415 Volts, IP 43 with suitable busbar, neutral link & earth link suitable for MCCB TP as incomer & MCB SP/TP as outgoing complete all as specified and directed. Make :Legrand Cat part No 507727/ Anchor Cat part No 98667/ Indoasian Cat part No 811890 Note : Rate of MCCB TPN 125 Amp shall be deemed to be included in the quoted rate.
Supply and fix MCB SP 5-32 Amp, 10kA ,c curve complete all as specified and directed. Make : Legrand Cat part No 408595/ Anchor Cat part No 98006/ Indoasian Cat part No 811129
Supply and fix MCB SPN 40-63 Amp, 10kA ,c curve complete all as specified and directed. Make :Legrand Cat part No 408618/ Anchor Cat part No 98015/ Indoasian Cat part No 811152
Supply & FIX Modular AC box complete with MCB 20-32 Amp, 230 volts AC complete all as specified and directed.
Supply and fix ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor including fixing of ceiling fan with 5 feet tie rod, canopy, U clamp, copper wounded motor, white colour complete all as specified and directed. Make : Havells Cat part No FHCMZSTWHT48/ Bajaj Cat part No 251162/ Crompton Cat part No RIV48OPW
Supply and fix instant Geyser 5 Ltr Capacity made of PVC outer cover, Stainless steel inner tank suitable for auto cut control system 5 star rating complete all as specified and directed.
S & F wall fan 400 mm (16 inch) 60 watt Oscillating wall fan (KD white) wall mounted speed 1350 RPM complete all as specified and directed. Make : Bajaj/ Crompton/ Havells
S & F conduit pipe 20mm for LAN/TV/telephone/internet wires concealed into wall or above the fall ceiling for each computer table as per the site requirement complete all as specified and directed
S& F modular type socket for LAN connection/telephone connection /USB connection complete all as specified and directed. NOTE : (i) Make and module of socket must be same as that of switch boards. (ii) Conduit must be laid during formation of structure frame
Supply, installation, testing and commissioning of Hot and Cold Cassette type Air-conditioner of cooling capacity 2 TR consisting air cooled copper condenser coil, Inbuilt Stabilizer, 3D Airflow, PM 2.5 filter, Anti-corrosion treatment for better air quality, Indoor sound level less than 48 DB, Display on Indoor unit, cordless LED/ LCD remote control ON/Off and other parameters, hermetically sealed compressor, fan motors with fan/blower, DX cooling coil, air filter, safety Controls/overload protection ,electrical wiring, first charge of Refrigerant (Non CFC) and Oil etc. with 4 – star BEE rating & ISEER not less then 4.39 suitable for working on single phase 230V, 50Hz power supply etc. complete all as specified & directed. Note : Copper refrigerant pipe, 3 core wire, stand for out door and indoor, making of holes into LGSF Structure to connect indoor and outdoor and other connected accessories included in the quoted rate ,
Supply, installation, testing and commissioning of Inverter type Hot and Cold Split Air-conditioner Hi wall Model of cooling capacity 1.5 TR consisting air cooled copper condenser coil, Inbuilt Stabilizer, 3D Airflow, PM 2.5 filter, Anti-corrosion treatment for better air quality, Indoor sound level less than 48 DB, Display on Indoor unit, cordless LED/ LCD remote control ON/Off and other parameters, hermetically sealed compressor, fan motors with fan/blower, DX cooling coil, air filter, safety Controls/overload protection ,electrical wiring, first charge of Refrigerant (Non CFC) and Oil etc. with 4 – star BEE rating & ISEER not less then 4.39 suitable for working on single phase 230V, 50Hz power supply etc. complete all as specified & directed Note : Copper refrigerant pipe, 3 core wire, stand for out door and indoor, making of holes into LGSF Structure to connect indoor and outdoor and other connected accessories shall be deemed to be included in the quoted rate
S & f voltage stabilizer 3 KVA copper wounded complete all as specified & directed.
M&L for laying of XLPE PVC sheathed armoured cable 120 sqmm 4 core, fixing of cable to the wall or on surface with saddle and u shaped clips complete all as specified and as directed.
supply and fix Raceway cable tray made of GI (dimensions width 300 mm to 600 mm and depth 150 mm to 300 mm ) suitable to put under flooring for laying LAN/TV cable and other electric wires complete all as specified and directed.
M&L for making way to fix cable Raceway under flooring by cutting the floor tiles/PCC using suitable tools and maintain the surface as per existing complete all as specified and directed. Note : If the plaster or PCC work required to maintain the surface will be done by contractor as per site requirement without any extra cost.
Supply and fix GI water tubing 25 mm bore, galvanised, medium grade with all fittings, laid in trenches in old/new position, fixed complete to walls, ceiling, post or laid in floors etc. with providing necessary fixing clamps, saddles etc. as required in new/old positions, complete as specified and as directed.
S & F PVC water tank of capacity 500 litre triple layered including 25 mm ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe complete all as specified & directed.
S&F voltage stabilizer 5 KVA copper wounded complete all as specified and directed.
M &L for laying of XLPE PVC sheathed armoured cable 35 sqmm 4 core fixed to wall or on surface with saddle and U shaped clips complete all as specified and directed.
S & F PVC water tank of capacity 1000 litre triple layered including 25 mm ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe complete all as specified & directed.
supply and fix factory made load line DB with 160 Amp MCCB TPN, double door made out of CRCA mild steel sheet with insulating materials like polyester epoxy coated surface mounting 12 way TPN 415 volts ,IP 43 with suitable bus bar, neutral link and earth link suitable for MCCB TP as incomer and MCB SP/TP as outgoing complete all as specified and directed. Make :Indoasian 811873/ Legrand 507728/ Anchor 98664 Note :Rate of MCCB 160 amp shall be deemed to be included in the quoted rate.
BEHAL TRADERS
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .