Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.6 LAccepted-AOC | L1 | Accepted-AOC AOC | |
| 2 | L2₹37.4 L+₹3.5 L (10.2%)Rejected-Finance 6TH CROSS STREET KAMARAJ NAGAR PALAYAMKOTTAI | PALAYAMKOTTAI | TIRUNELVELI | TAMIL NADU | 627002 | L2 | Rejected-Finance Not Lowest | |
| 3 | L3₹39.8 L+₹5.8 L (17.1%)Rejected-Finance | L3 | Rejected-Finance Not Lowest |
Tender Value
₹38 L
EMD Value
₹76,000
Closing Date
12 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE North Bangalore
GARRISON ENGINEER NORTH BANGALORE T 64 MEANEE LINES MEG AND CENTRE BANGALORE 560042
REPAIRS TO SUNKEN FLOORS IN TOILETS REPLASTERING AND KITCHEN CUPBOARD IN MD ACCN BUILDINGS OF FMME ASSAYE MEANEE MANDLAY DEO NCC MESS ECHS AND RC LINE UNDER THE AOR OF AGE B R MEG UNDER GE NORTH BANGALORE
2023_MES_595948_1
8391
Open Tender
Civil Works
Item Rate
180 days
BENGALURU
as per NIT
8 documents required · 8 mandatory
₹500
Yes
GARRISON ENGINEER NORTH BANGALORE
₹76,000
Yes
20 Jun 2023
16 May 2023
14 Jun 2023
16 May 2023
12 Jun 2023
29 May 2023
Amount
Taking down chowkat or frame with shutters (without taking of shutter from the frame) not exc 1.5 sqm each including making good the disturbed surface in PCC 1:2:4 type B0 or CM 1:3 all as specified and directed
Taking down chowkats or frames with shutters (without taking off shutter from frames) exc. 1.5 Sqm but n exc 4 Sqm each, including cutting holes for removing the hold fast etc (Disturbed surface of wall shall be make good by the contractor etc complete all as specified and as directed
Taking down shutters of any description exc 1 Sqm but not exc 2 Sqm each all as specified and as directed
M&L Solid PVC door frame (Single rebated) of size 60 mm x 30 mm made out of solid foam with homogenious fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100x8 sheet metal CSK screws complete all as specified and as shown on drawing (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life) complete all as specified and directed
M & L for factory made solid PVC moulded door shutter , 28 to 30mm thick (stiles) wuth 2,4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face & 2mm plain colour PVC sheet on back face supplying and fixing in frame at site as per specification & drawing with wood free EPS .
S&F Flush door shutters 35mm thick, factory made as per IS:2202 (Part-I 1999) solid core construction, with block board core with decorative face veneer both faces with lipping / frame to match as per drawing fixed to chowkhats all as speified and directed
S&F framed work as in doors or gates of angle or other sections with gusset plates, rails braces, etc complete drilled for fixing of steel sheeting or other covering, doors etc, to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings(exclusive of steel sheeting or other covering, running rails and guides) and hanging ; also fastening and fixing complete all as specied and directed
S& F framed work such as grills, gratings, guard bars etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railing; framework of water tanks and similar work conforming to Fe-290 Gde-E-165 complete all as specified and directed.
M & L applying two coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces over 10 cm width or girth including preparation of new steel surfaces
S & F Butt hinges stainless steel 100mm long and fixed to door frame and shutter duly welded / screwed complete all as specified and as directed
S & F Butt hinges medium weight, cold rolled mild steel 100mm long and fixed to door frame and shutter duly welded/screwed complete all as specified and as directed
S&F Aluminium anodised tower bolt 150mm long of extruded section etc complete all as specified and as directed
S&F Aluminium anodised tower bolt 200 mm long of extruded section etc complete all as specified and as directed
S&F 150 mm long aluminium handle, cast type, anodised etc complete all as specified and as directed
S&F aluminium alloy, anodised sliding door bolt 300 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy etc complete all as specified and as directed
S & F 150 mm floor door stopper of aluminium alloy powder coated, with hard down steel spring all as specified and as directed.
S&F in repair mild steel 300mm, ordinary rat tail rod pattern springs,including roller and roller plate complete
S&F Anodised aluminum powder coated (of any shade/colour as approved by GE ) ventilators with adjustable 4mm thick figured glass louvers, fixed in qtr portion, without sash bars, aluminum section weighing not.less than 0.55 kg/m including necessary jointing cleats, glazing clips, rubber packing, anodised aluminum snap beading, screws, including stainless steel wire cloth 0.36 nominal dia of wire and average width of aperture 1.18mm including complete etc all as specified and directed by the Engineer-in-charge (Size of Ventilators = 600 x 900 mm)
S&F Anodised Aluminum Powder coated three track sliding aluminum window including Frame and shutters consisitng of 2xglazed shutter (thickness of glass not less than 5mm) & 1xGauged shutter(stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperature 1.40mm), Aluminum sections weighing not.less than 0.55 kg/m including necessary jointing cleats, glazing clips, rubber packing, anodised aluminum snap beading, screws, anodised aluminum fittings such as peg stays, self closing clips, handles etc all as specified and directed
S&F in repairs stainless steel decorative curtain rod of 25 mm bore with wood finishes (weight not less 400 gms per running meter) incl fancy finale caps etc complete all as specified and as directed
S&F in repair Bracket for curtain rod of dia 25 mm dia made out of SS Flat not less than 20 mm wide 1.50 mm thick and overall length not less than 160 mm fixed with screws min 2 Nos with Rawl Plug of size not less than 50 mm long incl wooden base etc complete etc complete all as specified and as directed
Taking down shutters of any description exc 1 Sqm but not exc 2 Sqm and Re-fixing in same opening complete all as specified and directed
S & F in repairs 18/19mm THICK Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work,fixed in kitchen Cabinet or cupboards all as specified.
M&L for Plain fillets square, rectangular or triangular in section clean sawn , secured with nails or brads of second class hard wood fixed to cupboard shutter Not Exc 3 sqcm cross section area all as specified and directed.
S & F in repairs 18mm thick, PVC sheet one side prelaminated of approved texture ("Celuca Ply of Rajshree make or equivalent as approved by GE) as in Kitchen cabinet (with shelves and partitions) including necessary fittings & fixtures as per manufacturer's instructions complete all as specified and directed.
S&F in repairs stainless steel kitchen basket in various type of basket , plain basket height 4" Thali basket 8" height Cup saucer 4" heigt and perforated cutlury basket 4" height all as specified and directed.
S&F in repairs Stainless steel channel for basket sizes 600mm long and 46mm wide all as specified and directed (Make : Hettich / Godrej)
S&F in repairs stainless steel handle for basket size 6" all as specified and directed
S&F in repairs stainless steel Auto closing concealed hinges 9.5 cranks for half overlay doors with opening angle 95* (14-32mm) with integrated overlay adjustment +_ 2.50mm & depth adjustment 4mm complete all as specified. Make : Godrej / Hettich.
S & F grid suspended false ceiling GI grid system of size 600 x 600mm with main runner, cross tee, and wall angle of sutiable sizes as per manufactures instruction. Ceiling suspended with 3 mm dia GI wire hanger fixed with steel dash fastener, butterfly clips, hold down clips etc (Main runner, cross tee and wall angle of MS galvanized with PPPCGS) including 4mm thick HPSC self textured design pre primered non asbestos fibre cement building board fixed to false ceiling complete including taking down old ceiling inculding grids of any description complete all as specified complete all as specified.
Demolition of cement concrete and paving not exc 15 cm thick (below or above ground level) complete all as specified and as directed.
Demolition of brick work / stone masonry / pcc block masonry built in cement mortar of any description all as specified and directed.
M&L for Pre-cast cement concrete block masonry, Type C1 1:3:6 (20 mm graded stone aggregate) with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6 complete all as specified and as directed
M & L cement concrete type B0 1:2:4 (using 12.5 mm graded stone aggregate) 25mm thick as in levelling concrete finished even and fair complete all as specified and directed.
Dismantling the existing unserviceable floor / hearth or wall tilling incl cement mortar bedding (but not backing) and removing rubbish off from premises and providing M&L for Non Skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including screed bed of 15mm thick in CM(1:6) complete all as specified and directed
Dismantling the existing unserviceable floor/hearth or wall tilling incl cement mortar bedding (but not backing) and removing rubbish off from premises and providing M & L for Glazed coloured ceramic tiles in vertical surfaces 300x450x7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including rendering of 10mm thick in CM(1:3) on Brick work or stone masonry surface as backing coat of tiles complete all as specified and directed
Dismantling the existing unserviceable floor/hearth or wall tilling incl cement mortar bedding (but not backing) and removing rubbish off from premises and providing M&L for vitrified ceramic tiles light colour 8-10mm thick (square/rectangular)polished, area of each tiles not exc 0.36sqm in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including screed bed of 15mm thick in CM(1:6) complete all as specified and directed
Dismantling the existing unserviceable floor / hearth or wall tilling incl cement mortar bedding (but not backing) and removing rubbish off from premises and providing M&L for vitrified ceramic tiles 8-10mm thick (square / rectangular) polished, area of each tiles not exc 0.36sqm in vertical surfaces such as skirting / dados, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including rendering of 10mm thick in CM(1:3) on Brick work or stone masonry surface as backing coat of tiles complete all as specified.
Dismantling of old Stone set paving of any description (Laid bedded and pointed in any cement mortar) incl removing off the premises and providing M&L Pre-polished Machine cut Granite stone slab 18-20mm thick with edge rounded one side laid over and including 15mm thick cement mortar 1:4 screed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including complete all as specified and directed.
S & F kitchen sink with drainage board made of stainless steel 1mm thick kitchen or laborotry with plugs, washers and wastes including bedding in mortar on to dwarf wall or including fixing cantilever brackets and connecting union pipes overall size 915x460mm bowl size 410x330x160mm complete in repairs including Dismantling of old sink .
S&F of kitchen sink made of stainless steel 1mm thick kitchen with plugs, washers and wastes: including bedding in cement mortar to dwarf wall or including fixing cantilever brackets or fixing in granite slab and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete including Dismantling of old sink
S&F in repairs stainless steel plate rack of 0.63mm thick sheet, size 800mm x 600mm complete all as specified and as directed
S & F vitreous china wash basin white flat back size550x400mm excl chain and plug and porcelain stopper but incl CI bracket. waste fittings, brass chromium plated for glazed ware sinks, basins etc with long screwed shanks and flynuts, flange end bedded in red lead cement and other end fixed, PVC waste pipe 75 cm long complete all as specified and directed fixed in repairs
S & F vitreous china wash down water closet pan (Pedestal Pan) including fixing bolts, flush pipe anti syphonage pipe, plastic water closet seat back closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device etc complete of cera model cat pt no. 2008 incl plastic EWC seat cover, coloured closed pattern with flat bottom and cover of cera model cat pt 2308 and mild steel chromium plated or aluminised hinging device as in repairs complete all as specified and directed
S&F Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including PVC SWR P trap connecting to flush pipe and to anti syphonage pipe, etc. complete including making good to floor, fixed in repairs complete all as specified and directed.
S&F PVC valveless, syphonic action type, flushing cistern 10ltr capacity,low level, white, with inlet, ball valve, float and handle including brackets, connections to pipes and fixing of chain and pull, or lever, fixed in repairs complete all as specified and directed.
Supply & laying 20 mm outer dia CPVC pipes SDR 11 ( Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including all fittings and specials complete all as specified and directed including taking down old unserviceable pipe lines of any type.
Supply & laying 25 mm outer dia CPVC pipes SDR 11 ( Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including all fittings and specials complete all as specified including taking down old unserviceable pipe lines of any type.
S&F 20mm dia GI tubing medium grade and fixed complete to walls and ceiling or laid in floors complete all as specified and directed including taking down old unserviceable pipe lines of any type.
S&F 25mm dia GI tubing medium grade and fixed complete to walls and ceiling or laid in floors complete all as specified and directed including taking down old unserviceable pipe lines of any type.
S&F in repairs Brass CP wall mixer for mixing hot and cold water screwed down for iron pipe and fixed complete all as specified and directed (Cat No-6875 Marcus series of Prayag or equivalent make in Jaguar/ Hindware)
S & F in repairs 15 mm Centre hole Basin mixture W/o Pop Up all as specified and as directed. (Cat No 6850 Marcus series of Prayag or equivalent make in Jaguar/ Hindware)
S & F in repairs 15 mm Sink mixture with regular spout W/M all as specified and as directed. (Cat No 6855 Marcus series of Prayag or equivalent make in Jaguar/ Hindware)
S & F in repairs 15 mm pillar taps swan neck type, chromium plated cast copper alloy fancy type complete all as specified and as directed.(Cat No 6814 Marcus series of Prayag or equivalent make in Jaguar/ Hindware)
S & F in repairs 15 mm pillar cock, chromium plated cast copper alloy fancy type complete all as specified and as directed.(Cat No 6802 Marcus series of Prayag or equivalent make in Jaguar/ Hindware)
S&F in repairs 100mm (4") overhead shower ABS with brass Arm (225mm) & flange including fixing to steel pipe or union complete all as specified and as directed. (Cat No BOS-92 of Prayag or equivalent make in Jaguar/ Hindware)
S & F in repairs 15mm angle cock CP cast copper alloy screwed down high pressure with capstan head handle screwed both ends or for unions etc . (Cat No 6810 Marcus series of Prayag or equivalent make in Jaguar/ Hindware)
S & F Bib Cock 2 way double handle with CP flange as fixed in repair all as specified and as directed. (Cat No-6812 Marcus series of Prayag or equivalent make in Jaguar/ Hindware)
S & F chromium plated long body bib tap 15mm dia with CP flange as fixed in repair all as specified and as directed. (Cat No-6808 Marcus series of Prayag or equivalent make in Jaguar/ Hindware)
S & F chromium plated bib tap 15mm dia with CP flange as fixed in repair all as specified and as directed. (Cat No-6806 Marcus series of Prayag or equivalent make in Jaguar/ Hindware)
S&F in repairs Health faucet, brass body with 1mtr SS braided tube & wall hook complete all as specified and as directed (Cat No-BEA-41 of Prayag or equivalent make in Jaguar/ Hindware)
S & F in repairs Towel rail 500mm long stainless steel glossy finish complete all as specified and as directed. (Cat No-BA10S of prayag or equivalent make in Jaguar/ Hindware)
S&F in repairs Towel rack Brass glossy finish complete all as specified and directed. (Cat No BA-03 of Prayag or equivalent make in Jaguar/ Hindware)
S&F in repairs Towel ring Brass glossy finish complete all as specified and directed. (Cat No BA-02 of Prayag or equivalent make in Jaguar/ Hindware)
S&F in repairs Soap dish chromium plated brass fixed in wall as per manufacturers instruction.Cat Part No BA-45 of Prayag or equivalent make in Jaguar/ Hindware)
S & F in repairs Mirror 600x450 x 5-6mm thick with frame complete all as specified and directed . cat No BLM-01F of PRAYAG or equivalent make in Jaguar/ Hindware)
S&F in repairs PVC Mirror cabinet of size 400x500 mm complete all as specified and as directed.(Cat No 554 of Prayag or equivalent make in Jaguar/ Hindware)
S&F in repairs Unbreakable (Square) wall mounted shelf 500mm complete all as specified and directed(Cat No BEA-191A of Prayag or equivalent make in Jaguar/ Hindware))
S&F in repairs Unbreakable corner shelf (3Pcs set i.e 8"-1, 10"-1 & 12"-1)complete all as specified and directed (Cat No BEA-44A of Prayag or equivalent make in Jaguar/ Hindware)
S&F in repairs peg set of six fixed in wall as per manufacturers instruction(Cat No BEA 30 of Prayag or equivalent make in Jaguar/ Hindware)
S&F in repairs Toilet paper holder fixed in wall as per manufacturers instructions (Cat No BA-88 of Prayag or equivalent make in Jaguar/ Hindware)
S & F in repair PVC connection (Suitable for Cold Water Supply) 15 mm size with PTMT nuts of length 450 mm, all as specified and as directed.
S & F in repair PVC connection (Suitable for HOT Water Supply) 15 mm size with PTMT nuts of length 450 mm, all as specified and as directed.
S & F in repair 75mm dia PVC(SWR) Multi floor trap, plain with grating including jointing with solvent cement all as specified and as directed.
S & F in repair grating doom 100 mm dia of PTMT complete all as specified and as directed
S&F in repair 15mm dia Bib tap PTMT fancy type any colour screwed, for iron pipe and fixed
S&F in repair 15mm dia Pillar tap PTMT fancy type any colour screwed, for iron pipe and fixed
S&F in repair 15mm dia angle stop valve of PTMT any colour pressed screwed, for iron pipe and fixed
M & L rotational moulded polythene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I capacity of tank 500 ltrs including dismantling/taking down old unserviceable tanks complete all as specified and directed
M & L rotational moulded polythene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I capacity of tank 1000 ltrs including dismantling/taking down old unserviceable tankscomplete all as specified and directed
S & F in repairs 20 mm dia of bore ball float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and as directed [Minimum weight for 20 mm – 210 gms] .
S & F in repairs 20 mm gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe and including taking down old gate valve all as specified and as directed.
S & F in repairs 25 mm gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe and including taking down old gate valve all as specified and as directed.
Taking down cement plaster of any description hacking for key or raking out joint on old brick work / stone / concrete surface
M&L for rendering 15 mm thick on fairfaces of brick work or concrete surfaces in cement mortar 1:6 finished plastered surface even and smooth without using extra cement
M&L for rendering 15 mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:4 with WPC, finished plastered surface even and smooth without using extra cement Note :- WPC will be measured and paid separately
Supply only liquid water proofing compound
M&L for rendering 5 mm thick on ceiling /RCC surfaces in cement mortar 1:3, finished plastered surface even and smooth without using extra cement
M&L Preparation of newly plastered surfaces and applying two coat of oil bound distemper over a coat of alkali resistent primer complete all as specified and directed
M & L preparation of newly plastered surface of wall and applying two coats of cement base paint over one coat of primer complete all as specified and as directed.
M & L for preparing newly plastered ceiling surfaces and applying three coat of white wash complete all as specified & as directed.
M&L for providing and laying water proofing treatment to sunken portion of WCs, bathroom and kitchen etc by applying cement slurry mixed with two component Elastomeric Acrylic based polymer modified cementitious composite compound coating of make as approved in TI 5/2003 including demolition and removal the same from site of existing treatment of any type. The following procedures to be adopted during the execution of work :- (i) Demolition of existing treatment of any type including cleaning and removal of debris from site. (ii) First layer of slurry of cement @ 0.488 kg/sqm mixed with Acrylic based polymer modified cementitious composite compound @ 0.253 kg/sqm. The layer will be allowed to air cure for 4 hours. (iii) Second layer of slurry of cement @ 0.242 kg/sqm mixed with with Acrylic based polymer modified cementitious composite compound @ 0.126 kg/sqm. The layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. Contd/-- 94
Contd/-- 93 (iv) 20mm thick screed in cement mortar 1:3 mixed with liquid water proofing compound as per manufacturers instructions above the treated area. (v) Ponding the treated portion atleast 48 hours. if any leakage/seepage observed the entire procedures will be repeated without any extra cost. (vi) Provide 40mm dia light grade GI spout at the lowest point with 30cm projection beyond the out face of the wall. (vii) Sunken portion shall be filled with lean concrete 1:5:10 type E-2(using 40mm graded stone aggregate). Note :- (i) The sunken slab sloped towards outer face so as the drain the water to GI Spout pipe. (ii) Coving shall be provided at the junction of slab with the wall. (iii) Nahni trap shall be 10mm below finished floor level. Ensure the drain of pipe dia is larger than the nahni trap size. (iv) The outer end of the spout should be chamfered.
Demolition of existing roof treatment of any type including screed bed of any type/thick and providing screed bed/rendering 10mm thick in CM (1:3) mixed with and including supply of approved water proofing compound as per manufacturers instructions by removing all loose gravel, dirt, oil, grease and foreign materials by jet or dry air, cleaning the surfaces mechanically or by grinding to make it smooth and applying APP modified water proofing membrane as per IS 1654-2017/IS 16352-2017 , 3mm thick and weighing not less than 3.60kg/Sqm reinforced with non woven polyster/HMHDPE matt black finished over compatible primer/bonding bitumen @ 0.40 Litr/Sqm and torch applications of membrane with 75mm side overlap and 100mm end lap after necessary preparation of surface complete as per manufacturer's instructions and applying a coat of solar reflective bituminous aluminum paint on top @ 0.10 litre/sqm complete all as specified and directed.
M&L providing cement concrete type B0 1:2:4 (12.50mm graded stone aggregate) in copings, parapets and railing upto 60cm height, leveling concrete for Roof slab, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating as directed
Material and labour for spraying antiweed / non toxic solution / chemicals containing Glyphosate as per manufacture instructions and removing the weed including the roots after ensuring complete de-germification of plant / weed and cutting down the plant/trees off from roof / top sides of external walls of bldgs, in chajjas, wall junctions, junctions of GI / CI / AC / PVC pipes and taking out roots entered in wall/slabs, including making good the surface using PCC 1:2:4 type B1 or cement mortar (1:2) or brick work in CM(1:4) plastered with CM(1:4) to match with existing surface and repairing the pipes and joints which was affected by cutting down/taking out process all as specified and as directed for plants / trees located in the buildings upto four storey high, complete all as specified and directed by Engineer-in-charge. NOTE:- Contractor has to execute the work of de-generated plant/weeds as per the prior approval and directions of Engineer-in-charge. Rate includes cost of scaffolding as per site requirement.
S & F in repair 75 mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including necessary fittings all as specified and as directed.
As per item No 98 above but 110 mm dia .
S&F in repair 75mm dia PVC (SWR) Bends with access door of any radius
As per item No 100 above but 110mm dia
S&F in repair 75mm dia PVC (SWR) junction single (single T) equal or unequal with access door
As per item No 102 above but 110mm dia
S&F in repair 110mm dia PVC(SWR) brach piece, single (single Y) equal or un equal with access door
As per item No 104 above but 75mm dia
S&F in repair 110mm dia PVC(SWR) branch piece, (double Y) equal or un equal with access door
As per item No 106 above but 75mm dia
S&F in repair 75mm dia PVC(SWR) vent cowl
As per item No 108 above but 110mm dia
M/S POTHIRAJ AND CO
Atom Engineers and Builders
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .