Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹38.2 LAccepted-Finance | ₹38.2 L | L1 | Accepted-Finance Responsive |
| 2 | Not Admitted-Fee/PreQual/Technical/Finance | - | - | Not Admitted-Fee/PreQual/Technical/Finance Not qualified for AOC |
Tender Value
₹39.8 L
EMD Value
₹79,560
Closing Date
15 Jun 2026, 6:55 pmClosed
Executive Engineer
shalimar
SITC of Passenger Lift for Medical Centre Under Upgradation of Existing Infrastructure Residential Quarters / Labs / Classrooms/Hostels (CAPEX) at Main Campus Shalimar SKUAST-K.
2026_SKUST_310505_1
E-NIT-16 of 2026-27
Open Tender
Electrical Works
Percentage
90 days
main campus shalimar, SKUAST-K
Please refer Tender documents.
6 documents required · 6 mandatory
₹1,000
Assistant comptroller
₹79,560
4 Aug 2026
21 May 2026
16 Jun 2026
21 May 2026
15 Jun 2026
25 May 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Supply, Installation,Testing and commisioning of 15 Passenger Lift with the following Specifications as per IS:-14665 (2000) along with AMC of 3 years.
capacity passenger cum bed lift Machine room less (MRL) Bed lift with regenerative drive as per CPWD General Specification for Electrical Works (Part-III Lift & Escalator) 2003, BIS Codes, NBC 2016 as amended upto date having provision for barrier free access as per Harmonised Guidelines & Standards for Universal Accessibility in India - 2021 of MoHUA, serving different floors in the lift shaft as per detailed specifications enclosed and as under including all other equipment and accessories complete as required :- | 1 | No. | 25,81,451 | ₹25,81,451 |
| 1.01 | Operating Voltage:- 415 Volts 3 Phase
Hoistway size :- 1700mm X 2850 mm
Pit(mm) :- 1800
Capacity (kgs) 1020 Kg, 15 persons
Rise (m ) :17- 22 m Appx. 75-100 m/s
STOPS: 4 Stops With (all opening on the same side) /
Drive :Microprocessor Based V3F Drive.
Machine : P M Gearless (Located in shaft on top of guide rails)
Car Finish :
Rear Mid Panel = SS Honey Comb Rear Corner Panels = SS Honey Comb Side Mid Panels = SS Honey Comb Side Corner Panels = SS Honey Comb Front Panels = SS Honey Comb
False Ceiling Finish: SS Mirror Finish
Hand Rail :Stainless Steel Hair Line Finish Handrails on rear car panel
Ventilation:Cross flow fan
Flooring:Granite Flooring /anti skid /equivalent
Door Operator: DC Door Operator / Telescopic | - | - | - | - |
| 1.02 | Standard Features :
(i) Speed-1.0- 1.5 MPS (ii)Floors-5(G+4) (iii) Travel-17 metres(approx) (iv) Stops & opening : 4 stops and 3 openings (v) Controller: A.C. variable voltage & variable frequency (vi) Automatic rescue device (ARD) complete with dry maintenance free batteries as required. (vii) Operation: Microprocessor based single automatic push button/simplex selective collective/ duplex collective selective with/without attendant (viii) Power-415 Volts+10%, 3 phase, 50 Hz, 4 wires system (ix) Car Enclosure: Stainless steel scratch proof (Moon Rock/Honeycomb/ Hairline Finish) on all sides and stainless steel decorative ceiling with fans (indirect throw) and LED fitting. (x) The car flooring should be smooth and antiskid as approved by engineer-in-charge.
(xi) Type of doors:- (a) Car: Power operated, centre opening horizontal sliding stainless steel scratch proof (Moon Rock/Honeycomb/ Hairline Finish). (b) Landing doors: stainless steel scratch proof . (xii) A hand rail not less that 600mm long at 900mm above floor level to be fixed adjacent to control panel in the lift car. (xiii) Voice announcement system in the car to announce the position of the elevator in the hoist way as the car passes or stops at floor served by the elevator. (xiv) Closed loop Control System, protection against power fluctuation, self diagnostic control, Landing 112 DELHI SCHEDULE OF RATES (E&M)-2025 doors 2 hours Fire rated, Overload detection and protection, Overs peed Governer, Dot Matrix LED D & P Indicators In Car &Landings, BMS Compatibility, tamper proof infrared curtain covering almost the entire height of the lift car door, Alarm horn, Anti Nuisance Operation, CCTV camera system with 4 MP IP camera, suitable NVR and HDD for 30 days storage backup , Firemen switch, 2/3 way intercom, Emergency Stop Switch with battery backup for fan and light fitting for 1 hour, pit ladder. (xv) The lift doors shall have a vision panel to enable persons with hearing impairment to signal for help or assistance in the event of an emergency. (xvi)An appropriate technological support be provided (Through emergency messaging |services or alarms etc.) to respond to the emergency requirements of person with hearing impairment or deafness. (xvii) In case of failure of ARD or other electronic devices, a provision of manual rescue be provided. | - | - | - | - |
| 1.03 | Anti-nuisance Car Call Protection
Control System :- Simplex automatic operation Overload Device Nudging
Floor Annoucement Syatem with Music Emergency Firemen’s Service Emergency Car Light Unit
Infrared Curtain Door Protection
Full Car Operating Panel 8 Press & Speak Phone Door Time Protection
Emergency Alarm Button
Extra Door Time of Lobby & Parking Door Open/Close Button
Automatic Rescue Device with Dry Maintenance Free Batteries Auto Fan Cut Off
Provision of CCTV Camera
Fire Rating of Landing Doors for 2 Hours Floor Annuciator with Music
Provision of 3 way intercom with instrument. Indicators in Car and Landings | - | - | - | - |
| 2 | Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm) | 12 | Rmt | 144 | ₹1,728 |
| 3 | Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required. | 50 | Rmt | 706 | ₹35,300 |
| 4 | S/L of 4 X 16 sq. mm + 2 X 6 sq. mm earth wire and termination works etc in PVC conduit | 50 | mtr | 752 | ₹37,600 |
| 5 | S/I of MCBTPN 63A TPN with enclosure etc | 1 | Job | 5,500 | ₹5,500 |
| 6Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. | |||||
| 6.01 | Group B | 5 | Point | 1,182 | ₹5,910 |
stage.html
html • 0.03 MB
tech_eval.pdf
fin_eval.pdf
finance_1004383.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.52 MB
BOQ_1004383.xls
BOQ • 3.30 MB
ExtensionNotice02.pdf
PDF • 0.48 MB
extension01.pdf
PDF • 0.64 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .