REPAIRS/ REPLACEMENT TO UG CABLE, MAINT AND REPLACEMENT OF LT PANEL/CAPACITOR BANK AND CONNECTED ITEMS OF DISTRIBUTION SYSTEMS IN MICTS, 414 ASC, R LINES FTP KAMPTEE AND NAGPUR AREA UNDER GE KAMPTEE

Amount

Excavation in trenches in any type of soil not exceeding 1.5 meter wide and not exceeding 1.5M in depth for laying of Cables,poles, stay and getting out of excavated material complete all as specified and directed.

Excavation in trenches in any type of hard/ dense soil/ hard standing not exceeding 1.5 meter wide and not exceeding 1.5M in depth for laying of Cables, poles, stay and getting out of excavated material complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick each, excavated soil in trenches after the cables have been laid and tested complete all as specified and directed

Removal of surplus soil to a distance not exc. 50m and deposited where directed at a level not exc. 1.5 m above the starting point all as specified and as directed.

S&F Double wall Corrugated High Density Polymer Ethyl (HDPE) pipe For laying of Electric cable of size 50mm outer diameter and 38 mm inner Diameter with IS 14930 (part 2):2001 & IS: 16205 Part -24 laid in trenches, wall, floor, pole including bends, sockets and other connected accessories complete all as specified and directed Make:- Dura. Line/ Tijaria/ REX/ Ketron

S&F Double wall Corrugated High Density Polymer Ethyl (HDPE) pipe For laying of Electric cable of size 63 mm outer diameter and 51 mm inner Diameter with IS 14930 (part 2):2001 laid in trenches, wall, floor, pole including bends, sockets and other connected accessories complete all as specified and directed Make:- Dura Line/ Tijaria/ REX/ Ketron

M&L for RCC Slab Type B0 (1:2:4) for cable route indicators of size Length 0.9 mtr x 0.3mtr x 0.065 mtr duly writing "MES LT/HT Cabe" duly painted with Weather coat paint embeded in PCC (1:4:6) under ground at depth 0.45 mtr all as directed.

Taking down the unserviceable LT cable of any size from tranches/ walls /floor etc complete all as specified and as directed. Note:- laying of cable route is same as old cable route.

Supply and laying in trenches or fixing in walls / poles or drawing through pipe XLPE insulated, screened, PVC bedded, galvanised steel strip, electric power cables ( heavy duty) with aluminium conductor, 1100 volts, grade cross sectional area 120 sq mm, 3.5 core including testing after laid and jointed all as specified and as directed. Make:- Gloster/ Polycab/ Havells Note:- Excavation and earth work, cable protection shall be measured and paid separetely.

All as per item No. 9 above but cable size 95 sq mm 3.5 core all as specified and as directed.

All as per item No. 9 above but cable size 35 sq mm 3.5 core all as specified and as directed.

All as per item No. 9 above but cable size 16 sq mm 4 core all as specified and as directed.

M&L for earthing complete with galvanized steel earth plate electrode 600 x 600 x 6mm thick buried directly in ground vertically to a depth not less than 2.25m below ground level with top edge of earth plate not less than 1.5m below ground level connected to galvanized iron earth strip 30 x 5 mm by means of bolts, nuts, check nuts, washers of galvanized iron and connected to main switch/control board upto 7.5m away from the earth electrode including excavation earth work, PCC chamber, RCC cover slab char coal, watering pipe, wire mesh lugs, earth lead protection pipe 40mm bore, light grade 7.5m long as applicable and as per plate No. 5 of SSR 2009 and all as specified. (a) Excavation and earth work in any type of soil. (b) Drilling of holes in electrode (c) PCC pit in cement concrete (1:2:4) type B-1 (d) 40 mm thick Pre-cast RCC cover with suitable handle. (e) Funnel with watering pipe of GI 20 mm nominal bore ,medium grade & copper lug etc. (f). 40mm nominal bore medium grade GI protection pipe 7.50 m long for protection of earthing lead. (g) Requisite quantity of charcoal and common salt. (h) Connection to earthing test point and testing on completion.

S&F Heat shrinkable straight through cable jointing kit for 1100 Volts grade cable joint complete with jointing material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 150 to 185 Sq mm. Note :- Any Excavation and earth work, Returning and filling, Removing involved shall be measured and paid separately. Make:- Birla 3 M / Raychem / Mahindra

All as per item No. 14 above but cable size 70 - 120 sq mm cable size complete all as specified and directed. Make:- Birla 3 M / Raychem / Mahindra

All as per item No. 14 above but cable size 25 - 50 sq mm cable size complete all as specified and directed. Make:- Birla 3 M / Raychem / Mahindra

Supply, erecting & fixing steel tubular swaged pole complete with base plate, pole cap, nut bolt washer etc 8.5 meters long type 410 SP-22 swaged poles conforming to IS 2713 (Part-I to III) 1980 all as specified including two coats of black bitumen paint through out internally and externally upto planting depth and applying two coats of aluminum paint over one coat of red oxide primer (externally) and Numbering of poles as directed including excavation /earth work, PCC (1:4:8) type D-2 using 40mm aggregate for pole foundations of size 600x600x1500mm height upto ground level and using PCC (1:2:4) B-1 for coping with size 450x450x300mm including necessary formwork complete with taking down old unserviceable pole all as specified and as directed.

S&F in repairs thermoplastic cable entry junction boxes of size 250 x 220 x 135 mm and IP-65 protection level with metric knock out fixed on poles with MS clamps, nuts, bolts and washers including MCB SPN, 5-32 amps, 'C' series, breaking capacity 10 KA, 'C' curve 240 volts, 50Hz including necessary incoming and outgoing electric connection with suitable size of copper lugs etc., separate (detachable) gland plate, bakelite connector 4 way 20 amp, dust and vermin proof, front door opening with hinges and locking arrangement, complete all as specified and as directed. Make:- Cat No: GSMB-2522 of Sintex or Neptune / Hensel

S&F LED street light luminaires of capcity 45 watts with pressure die cast aluminium housing heat resistance toughened glass, IP 66 protection complete with driver, 2.5 sqmm 2 core multistranded Aluminium wire for connection from street light fitting to OH line or junction box, and fixing accessories including taking down old unserviceable fitting complete all as specified and directed. Make:- Cat No. SSK-SLF-BO-45W of Syska LED / Crompton/ Philips/ Bajaj.

S&F LED driver for 60W LED street light fittings complete all as specified and as directed. Make : As per sample

S&F LED driver for 45W LED street light fittings complete all as specified and as directed. Make : As per sample

Taking down the unserviceable LT Panel of any size complete with all accessories complete all as specified and as directed.

Supply, install, test and commissioning of LT panel board / feeder pillar box, outdoor cubicle type, vermin proof, dust proof (of CPRI approved manufacturer), fixed on 50x50x5mm MS angle iron frame fixed 300mm above ground level and 450mm below the ground level grouted in and including PCC (1:3:6) type C1 (using 20mm grade stone aggregate) and plane made out of 3.00 mm thick CRCA sheet for both outer shell and 2.00mm hick for inner shell both side open able supported on and including ISMC 75 X 40mm powder coated steel frame and totally powder coated with epoxy siemen grey colour from inside and outside with locking arrangement and fixing arrangement i.e nuts, bolts, washers, clamps etc, with naturally air cooled epoxy insulated aluminium busbar TPN suitable for 300 Amps with detachable gland plate for incoming and outgoing cable including termination of cable ends both incoming and outgoing with sufficient working space inside complete,all control cables shall be of 2.5 Sqmm copper multi stranded conductors and shall be properly bunched with suitable size binding materials, ferruled for proper identification of colour codes and crimped with adequate size of lugs also to accommodate and consisting of the following items, all as specified and as directed. (a) Busbar chamebr for 3 phase & nuetral of capacity 300 Amps (30mm x 10mm) alumunium bus bar duly insulated with heat shrink sleeve (b) Multifunctioning meter to measure Voltage, ampere, KWH, PF -1 Nos (c) one set of pilot lamp. (d) Incoming MCCB 160 amps 4 Pole 415 volts 25 KA thermal magnetic setting type- 1 Nos (e) Outgoing MCCB 63 amps 3 pole 415 volts 10 KA thermal magnetic setting - 5 Nos (f) Outgoing Type MCB 63 amps 3 Pole 415 volts 10 KA - 2 Nos

Dismantling cross arms of M.S. channel or angle sections etc. complete and setting aside for re-use with in 50m complete all as specified and directed.

Dismantling insulators any type, any size complete all as specified and directed.

Dismantling stay assembly complete all as specified and directed. Note:- Demolition of concrete, etc. and excavation measured separatey.

Dismantling of ACSR or AAC conductors complete all as specified and directed.

S&F MCCB 4 Pole, 415 V, Adjustable type, 160 Amps with breaking capacity 36 KA complete all as specified and directed. Make: Legrand / Siemens / ABB

S&F MCCB 4 Pole, 415 V, Adjustable type, 200 Amps with breaking capacity 36 KA complete all as specified and directed. Make: Legrand / Siemens / ABB

S&F MCCB 4 Pole, 415 V, Adjustable type, 350 Amps with breaking capacity 36 KA complete all as specified and directed. Make: Legrand / Siemens / ABB

M&L for Hi- Voltage Insulating Mat, Class C, W. V.- 33 KV (33000 Volts), ISI Marked (Nos.), Anti-Skid Surface and Pastable Type, ERDA/ CPRI/ BIS Approved, ISI mark, embossed at every meter on Top Side of Mat Confirming to IS:15652 Cat-III, Thickness-3.0 mm, 2mtr X 1 mtr size Colour- Black. Flame Retardant, Acid/ Alkali/ Diesel and Oil Resistant. Suitable for Trolley movement. complete all as specified and directed. Make:- Vardhman.

M&L for PCC (1:2:4) with 20mm aggregate in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, complete all as specified and directed.

M&L for PCC (1:2:4) with 40mm aggregate in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, complete all as specified and directed.

M&L for rendering 15mm thick plaster on fair faces of brickwork or concrete surfaces in CM (1:6) all as finishing the surface complete all as specified and directed.

M&L for mild steel fabrication works such as angle / FI clamp, Ms pipe nuts, bolts, washers welding, bending cold or hot drilling holes for bolts in any shape and size etc including two coats of synthetic enamel paint cover a coat of red oxide primer complete all as specified and directed.

Cleaning of sub station area by uprooting all types vegitation, shrubs, weeds, saplings and creepers of unwanted trees complete with the help of spade, axes, crowbars and other mechanical means after taking necessary electrical shutdown from concerned incharge of various sub stns of military station Kamptee complete all as specified and directed.

Trimming of tree branches touching of Over head Elecctrical Lines upto 2.5 mtr distance from conductors after taking necessary shutdown from concerned incharge complete all as specified and directed. (Note: Space between poles will be measured as one unit irrespective of nos of conductors.)

M&L for horizontal boring in road/hard surface not exceeding 20 mtr in one strech and not exceeing 1.5 mtr depth for passing LT cable complete all as specified and directed.

M&L for Loose filling with aggregates of gauge 40 to 80 mm crushed stone back colour suitable for spreading in electrical sub stn after preparation site by removing all type of debris, removing unwanted soil, and spreading lime powdwer beneath the aggregate complete all as specified and directed.

NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs.50,350.00]

Paragon Electrotechnics

Chinmaya Enteprises

Bidder Name

Paragon Electrotechnics

Chinmaya Enteprises

Vaidehi E Link