SPECIAL REPAIR /REPLACEMENT OF RUSTED WATER SUPPLY PIPE LINE, UNSV TANKS INTO NEW IN THE AOR OF THE GRC UNDER GE (W) JABALPUR

Amount

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation etc or for shaft, wells, cesspits, manholes, pier holes etc not exceeding 10 sqm on plan and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in, including spreading, leveling watering and well ramming in layers not exc 25 cm with excavated soil complete all as specified and directed.

Removing excavated material soils, not exc 50m and depositing where directed at level not exc 1.5m above the starting point complete all as specified and directed.

Taking down or taking up steel water tubing , galvanised from trenches / walls / floors including all fittings, segregatting and stacking the serviceable pipes and fittings properly at site for re-use all as specified and directed for following bore of pipe : - Note Excavation and earth work shall be meassured and paid under relevant item of schedule separately.

(a) 15mm Dia

(b) 20mm Dia

(c) 25mm Dia

(e ) 80mm Dia

Taking down MS/DI water tubing from trenches/floors including all fittings properly at site of size 200mm complete all as specified and as directed.

Taking down MS/DI water tubing from trenches/floors including all fittings properly at site of size 100/150mm complete all as specified and as directed.

Supply and laying of GI steel tubing 80mm bore medium grade with replacement of US fitting laid in tranches/wall/floor and joined icluding necessary fittings such as bends, elbows , tees, sockets etc including necessary saddles and clamps complete all as specified and directed. Make: Jindal/Tata Steel/Approved by GE

Supply and laying of GI steel tubing 50mm bore medium grade with replacement of US fitting laid in tranches/wall/floor and joined icluding necessary fittings such as bends, elbows , tees, sockets etc including necessary saddles and clamps complete all as specified and directed. Make: Jindal/Tata Steel/Approved by GE

Supply and laying of GI steel tubing 40mm bore medium grade with replacement of US fitting laid in tranches/wall/floor and joined icluding necessary fittings such as bends, elbows , tees, sockets etc including necessary saddles and clamps complete all as specified and directed. Make:Jindal/Tata Steel/Approved By GE

Supply and laying of GI steel tubing 25mm bore medium grade with replacement of US fitting laid in tranches/wall/floor and joined icluding necessary fittings such as bends, elbows , tees, sockets etc including necessary saddles and clamps complete all as specified and directed. Make: Jindal/Tata Steel/Approved by GE

Supply and laying of GI steel tubing 20mm bore medium grade with replacement of US fitting laid in tranches/wall/floor and joined icluding necessary fittings such as bends, elbows , tees, sockets etc including necessary saddles and clamps complete all as specified and directed. Make: Jindal/Tata Steel/Approved by GE

Supply and laying of GI steel tubing 15mm bore medium grade with replacement of US fitting laid in tranches/wall/floor and joined icluding necessary fittings such as bends, elbows , tees, sockets etc including necessary saddles and clamps complete all as specified and directed. Make: Jindal/Tata Steel/Approved by GE

M&L in replacement Gun metal globe/ gate valve (ISI Marked) with iron wheel head, screwed both ends for pipes or for unions for 40mm bore dia steel tubing complete all as specified. Make: Zoloto/Astral/Approved by GE

M&L in replacement Gun metal globe/ gate valve (ISI Marked) with iron wheel head, screwed both ends for pipes or for unions for 50mm bore dia steel tubing complete all as specified. Make: Zoloto/Astral/Approved by GE

M&L in replacement Gun metal globe/ gate valve (ISI Marked) with iron wheel head, screwed both ends for pipes or for unions for 25mm bore dia steel tubing complete all as specified. Make: Zoloto/Astral/Approved by GE

M&L in replacement Gun metal globe/ gate valve (ISI Marked) with iron wheel head, screwed both ends for pipes or for unions for 20mm bore dia steel tubing complete all as specified. Make: Zoloto/Astral/Approved by GE

S&F Ductile iron pipe class K-9 ISI marked with internal cement mortar lining and external zinc and bitumen coated pipes 200mm bore with all required DI fittings complete with push on rubber gasket joint, complete all as specified and directed.

S&F Ductile iron pipe class K-9 ISI marked with internal cement mortar lining and external zinc and bitumen coated pipes 150mm bore with all required DI fittings complete with push on rubber gasket joint, complete all as specified and directed.

S&F Ductile iron pipe class K-9 ISI marked with internal cement mortar lining and external zinc and bitumen coated pipes 100mm bore with all required DI fittings complete with push on rubber gasket joint, complete all as specified and directed.

S&F in replacement Cast Iron sluice valve, ISI Marked 200mm bore flanged of class 1.6 PN having spindle made out of gun metal, operating wheel, nuts, bolts, packing complete all as specified and directed.

S&F in replacement Cast Iron sluice valve, ISI Marked 150mm bore flanged of class 1.6 PN having spindle made out of gun metal, operating wheel, nuts, bolts, packing complete all as specified and directed.

S&F in replacement Cast Iron sluice valve, ISI Marked 100mm bore flanged of class 1.6 PN having spindle made out of gun metal, operating wheel, nuts, bolts, packing complete all as specified and directed.

S&F in replacement Cast Iron sluice valve, ISI Marked 80mm bore flanged of class 1.6 PN having spindle made out of gun metal, operating wheel, nuts, bolts, packing complete all as specified and directed.

Material & labour brick masonry valve pit of size 90cm x 90cm x 90cm (internal size) with mild steel cover 6mm thick and angle iron frame of size 50cm x 50cm x 6mm duly painted with two coats of synthetic enamel paint over a red oxide primer including locking arrangement, brick work and all inner surfaces of pit and exposed portion of out side shall be plastered in cement motor (1:4) complete all as specified and directed.

Material & labour brick masonry valve pit of size 50cm x 50cm x 50cm (internal size) with mild steel cover 6mm thick and angle iron frame of size 50cm x 50cm x 6mm duly painted with two coats of synthetic enamel paint over a red oxide primer including locking arrangement, brick work and all inner surfaces of pit and exposed portion of out side shall be plastered in cement motor (1:4) complete all as specified and directed.

Material and labour for cutting, drilling and taping cast iron/ Ductile iron water mains (in position) for branch connection of the internal dia 150 to 200mm including necessary fittingd such as ferrules, nipple short pipe etc complete all as specified.

M&L for 25mm thick cement concrete (1:2:4) type B1, using 20mm graded stone aggregate laid over roof as in platforms for water tanks, finished even and smooth without using extra cement complete all as specified and directed.

Dismantling water tanks capacity exc 250 ltr and n exc 500 ltr and removing from site all as specified and directed by Engr-in-charge.

Dismantling water tanks of capacity exc 500 ltr and n exc 1000 ltr and removing from site all complete as specified and directed by Engr-in-charge.

Dismantling water tanks of capacity exc 1000 ltr and n exc 5000 ltr and removing from site complete all as specified and directed by Engr-in-charge.

Supplying, fixing & Hoisting and fixing in position and connecting 500 litres capacity rotational moulded polythylene water storage tank (cylindrical, vertical with closed top thred type) 2 layer fixing arrangement for inlet/outlet/over flow and vent pipe of standard size all as sepecified in SSR Part-I complete all as specified and directed.

Supplying, fixing & Hoisting and fixing in position and connecting 1000 litres capacity rotational moulded polythylene water storage tank (cylindrical, vertical with closed top thred type) 2 layer fixing arrangement for inlet/outlet/over flow and vent pipe of standard size all as sepecified in SSR Part-I complete all as specified and directed.

Supplying, fixing & Hoisting and fixing in position and connecting 2000 litres capacity rotational moulded polythylene water storage tank (cylindrical, vertical with closed top thred type) 2 layer fixing arrangement for inlet/outlet/over flow and vent pipe of standard size all as sepecified in SSR Part-I complete all as specified and directed.

Supplying, fixing & Hoisting and fixing in position and connecting 5000 litres capacity rotational moulded polythylene water storage tank (cylindrical, vertical with closed top thred type) 2 layer fixing arrangement for inlet/outlet/over flow and vent pipe of standard size all as sepecified in SSR Part-I complete all as specified and directed.

S&F, 20mm bore, Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed. Make: Prayag/Shakti/Appoved By GE

S&F, 25mm bore, Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed. Make: Prayag/Shakti/Appoved By GE

S&F, 40mm bore, Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed. Make: Prayag/Shakti/Appoved By GE

S&F DI fitting for spigot socketed cast iron pipes 80 to 300mm bore such as bends (any type, radius and angle), tapers any type straight, bend, increasing, decreasing or double socket etc), tee pieces, single branch, 'Y' junction, double branch, cross (all sockets and spigot), collars, caps and plugs complete all as specified and directed.

Materials and labour for road cutting, including excavation, returning filling in, spreading, leveling, well ramming in layers, soiling with broken bounders/ stones, thick coarse aggregate received from dismenting the existing road, premix, carpeting 25mm thick using ready mix patchmate material, rolled and compacted for road patch, PCC repair work complete all as specified and directed.

shri krishna traders

Haryana EngineerService