WBPWD/EE/KNHED/e-NIQ-35/2nd Call /(Revised)/25-26

SITC of Automatic Lift for IPD Building ( as per manufacturer design & as per detailed specification below conforming to IS ) and putting into operation after final testing in the existing lift shaft complete with all accessories and repairing the damage wall / floor if any etc to complete as reqd. Make : OTIS / KONE/SCHINDLER Type: Deeper Car Passenger Lift . Load : 15 Passenger Control: Microprocessor based with AC variable voltage & variable frequency ( VVVF) Machine:-Energy efficient machine, Gearless, With Machine Room Position of Machine Room: Above shaft Speed:1 Mtrs./ Sec Floor served: G+3 Landing: 4, all on same side Total Rise :14 Mtr (Approx) (Bidder should visit the site)

Operation: Microprocessor based simplex full collective with or without attendant. Signals: LCD car position indicator,car travels direction indicator in car & at all landing with call registration indicator. Leveling accuracy:±5 mm(Micro levelling arrangement )

CAR Car inside :1000 mm (W) x 2400 (D) mm x 2200mm(H) suitable for Strecher accomodation or as per standard design of Awardee Agency satisfying IS code. Car Entrance : Clear Opening 900 mm Wide x 2100 mm High protected with car door Car Enclosure: Stainless Steel sheet (20 SWG) with Hairline finish with hand rail Car Ceiling & Lighting: Stainless Steel with hairline finish with LED lighting and Fan Car Ventilation: Pressure fan with anodised aluminium grill. Car Flooring : Decorative granite flooring (As per direcion of EIC and according to this Department's Order).

Car Door: Stainless Steel Centre Opening automatic door with controlled door drive system Landing Door: Stainless Steel Centre Opening/ Side Opening automatic door with controlled door drive system & synchronizing operation with car door. Door Opening: Automatic power operated door with full length Photocell assembly light curtain sensor

PROTECTIVE DEVICES & OTHER ACESSORIES ARD: Automatic rescue device complete with dry maintenance free batteries as required.for automatic evacuation to the nearest floor in case of power failure / single phasing/others. Overload Protection:Fully loaded with overload protection.On overloading the lift car will not start with door remaining open and give audio display indication Emergency lighting in car: Battery operated emergency lighting in the lift car. Intercom system: Battery operated intercom system in Lift Car, Machine Room & Control Room Emergency Alarm: Battery operated alarm bell system in lift car and control room

Fireman switch:Fireman switch at main landing terminal. a)Two Hrs Fire rated and provision of the NBC Part IV 2016 b)The Lift are design as "Fire Lift" and Shall be conspicuously indicated/marked. Voice Synthesizer: Voice announcement system (Voice Synthesizer) in the car to announce the position of the elevator in the hoist way as the car passes or stops at a floor served by the elevator. Coated steel belt - As per manufacturer's standard conforming to IS

DIMENSION OF SHAFT & POWER SUPPLY Available Shaft Dimension : 2200 mm (W) X 2850 mm(D) Pit Depth : 1360 mm (Bidder should visit the site) Overhead : 4800 mm (Bidder should visit the site) Electric power supply: AC 415 Volt 3phase, 50 Hz, terminated in machine room as per IS N.B. Rates should be quoted with minor civil works, wall cutting and mending good the damages to the original finish.

SITC of Automatic Lift ( as per manufacturer design & as per detailed specification below conforming to IS ) and putting into operation after final testing in the existing lift shaft complete with all accessories and repairing the damage wall / floor if any etc to complete as reqd. Make : OTIS / KONE/SCHINDLER Type: Deeper Car Passenger Lift . Load : 15 Passenger / 1020 Kg Control: Microprocessor based with AC variable voltage & variable frequency ( VVVF) Machine:- Energy efficient machine, Gearless, With Machine Room

Position of Machine Room: Above shaft Speed:1 Mtrs./ Sec Floor served: G+3 Landing: 4, all on same side Total Rise :14 Mtr (Approx) (Bidder should visit the site) Operation: Microprocessor based duplex full collective with or without attendant. Signals: LCD car position indicator,car travels direction indicator in car & at all landing with call registration indicator. Leveling accuracy:±5 mm(Micro levelling arrangement )

CAR Car inside :1000 mm (W) x 2400 (D) mm x 2200mm(H) suitable for Strecher accomodation or as per standard design of Awardee Agency satisfying IS code. Car Entrance : Clear Opening (a)800 mm Wide x 2100 mm (b)800mmx2100 mmHigh protected with car door Car Enclosure: Stainless Steel sheet (20 SWG) with Hairline finish with hand rail Car Ceiling & Lighting: Stainless Steel with hairline finish with LED lighting and Fan Car Ventilation: Pressure fan with anodised aluminium grill. Car Flooring : Decorative granite flooring (As per direcion of EIC and according to this Department's Order).

Car Door: Stainless Steel Centre Opening automatic door with controlled door drive system Landing Door: Stainless Steel Centre Opening / Side Opening automatic door with controlled door drive system & synchronizing operation with car door. Door Opening: Automatic power oprated door with full length Photocell assembly light curtain sensor

PROTECTIVE DEVICES & OTHER ACESSORIES ARD: Automatic rescue device complete with dry maintenance free batteries as required.for automatic evacuation to the nearest floor in case of power failure / single phasing/others. Overload Protection:Fully loaded with overload protection.On overloading the lift car will not start with door remaining open and give audio display indication Emergency lighting in car: Battery operated emergency lighting in the lift car. Intercom system: Battery operated intercom system in Lift Car, Machine Room & Control Room

Emergency Alarm: Battery operated alarm bell system in lift car and control room Fireman switch:Fireman switch at main landing terminal. a)Two Hrs Fire rated and provision of the NBC Part IV 2016 b)The Lift are design as "Fire Lift" and Shall be conspicuously indicated/marked. Voice Synthesizer: Voice announcement system (Voice Synthesizer) in the car to announce the position of the elevator in the hoist way as the car passes or stops at a floor served by the elevator. Coated steel belt - As per manufacturer's standard conforming to IS

DIMENSION OF SHAFT & POWER SUPPLY Available Shaft Dimension : (a) 1650 mm (W) X 2750 mm(D) (b)1650 mm (W) X 2750 mm Pit Depth : 1200 mm (Bidder should visit the site) Overhead : 4400 mm (Bidder should visit the site)(Both are Same) Electric power supply: AC 415 Volt 3phase, 50 Hz, terminated in machine room as per IS N.B. Rates should be quoted with minor civil works, wall cutting and mending good the damages to the original finish.

Cost of dismaintling from the existing 3 nos lift well & removal from the well along with its all Bracket,Rope,Rail,Car,Machine and Gate and all Other accessories

Less Cost of dismantled & unserviceable Materials

TERMS & CONDITIONS

Any other item or items left out from the BOQ but essentially required for successful completion of the work may be raised for inclusion in the scope of work during pre-bid meeting. Otherwise bidder has to consider left out items deemed to be included in the scope of work. Bidders are advised to physically visit the site and quote the price accordingly.

Defect Liability period 1 (One) Year

(Rates should be Quoted inclusive of all taxes & duities and GST and 1% LWC)