SPECIAL REPAIR TO TOILET AND BATHROOMS OF BLDG NO P-285(OTM ACCN), Bldg No.P-173/01 to 08 (OR Md Accn) and Bldg No P-139/01 and P-139/02 Md Accn in Zone-III area at Jaipur Mil Stn under GE(S) Jaipur

Amount

35/SR/Bldg/19-20/Q3W Taking down cement plaster, any description on brick or stone walls, etc. incl. raking out joints, hacking for key, scrubbing down with water, etc. 35/SR/Bldg/19-20 - 600 37/SR/Bldg/19-20 - 750 34/SR/Bldg/19-20 - 225

M&L rendering 15 mm thick on brick masonary surface or surface other than fair face of concrete brickwork in CM (1:6) finished even and smooth without using extra cement. 35/SR/Bldg/19-20 - 200 34/SR/Bldg/19-20 -175

M&L rendering 15 mm thick on brick masonary surface or surface other than fair face of brickwork in CM (1:4) surface finished even and smooth without using extra cement.

M&L Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM (1:3) in ceiling ,surface finished even and smooth without using extra cement. 35/SR/Bldg/19-20 - 100 37/SR/Bldg/19-20 - 300 34/SR/Bldg/19-20 - 50

Taking down Chowkats or frames not exc 1.5 sq. m each with shutters (without taking off shutters from the frames). 35/SR/Bldg/19-20 - 34 37/SR/Bldg/19-20 - 32 34/SR/Bldg/19-20 - 04

Taking down Chowkats or frames exc 1.5 sqm bur not exc 4 sqm each with shutters (without taking of shutters from the frames). 35/SR/Bldg/19-20 - 03 37/SR/Bldg/19-20 - 06

Taking down shutters exc 1 sqm bur not exc 2 sqm each with shutters. 35/SR/Bldg/19-20 - 12 37/SR/Bldg/19-20 - 16 34/SR/Bldg/19-20 - 10

Providing and fixing 28mm thick factory made PVC Supreme Door Shutter consisting of frame made out of M.S. tubes of 19 gauge thickness nd size of 40mmx20mm for stiles, top and bottom rails having a coat of steel primers of approved make and manufacture. M.S. Frame covered with 4mm thick heat moulded Prelam PVC 'C' Channel of size 28mm thickness,75mm width out of which 60mm shall be flat and 15mm shall be tapered in 45dgree angle on either sides forming stiles, top and bottom rail and 100mm wide Prelam PVC sheet out of which 100mm shall be be flat and 15mm shall be tapered An additional of 5mm thick PVC sheet of 20mm width is to be stuck on the interior side of 'C' Channel using PVC solvent adhesive etc. complete on both sides to form lock rail.Lock rail shall be provided on either side of panel. Panelling of 4mm thick PVC sheet to be fitted in the MS Frame welded/sealed to the stiles with 8mm (4mm + 4mm) x 12mm wide PVC sheet as beading on inner side and 8mm (4mm + 4mm) x 20mm wide PVC sheet as beading on the inner tapered side of lock rails joined together with solvent cement adhesive. An additional of 4mm thick PVC sheet of 20mm width is to be stuck on the interior side of 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer's specification and drawing. 35/SR/Bldg/19-20 - 20 37/SR/Bldg/19-20 - 30 34/SR/Bldg/19-20 - 06

Providing and Fixing Factory made Rajshree Adjustable (PVC) Doorframe Manufactured of the size 65mm x 60mm with a wall thicknes of 4mm, made out of extruded 4mm PVC foam sheet, metre cut at two corners and joined with 2nos. of 150mm long brackets of 15 x 15mm M.S. Square tube. The two vertical door profile are to be reinforced with 40 x 20mm M.S. tube of 19 guage through out the frame. The doorframe shall be fixed to the wall using 65/100mm long M.S. Screw through the frame by using PVC fastners. A minimum of 4 nos. of screws to be provided for each vertical member & minimum 2 nos. for horizontal member etc. complete as per manufacturers specification and direction of Engineer-in-Charge. 35/SR/Bldg/19-20 - 100 37/SR/Bldg/19-20 - 80 34/SR/Bldg/19-20 - 29

35mm thick IInd class hard wood factory made plain, framed, panelled shutter (two panel) with lock rail & panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail & steel as per IS:1003 (Part-I) kiln seasoned & chemically pressure treated. 35/SR/Bldg/19-20 - 12 37/SR/Bldg/19-20 - 8 34/SR/Bldg/19-20 - 12

M/L for Factory made steel ventilators with top hung shutters incl hinge steel peg stay complete incl. taking down old ventilator 35/SR/Bldg/19-20 - 15 37/SR/Bldg/19-20 - 08 34/SR/Bldg/19-20 - 04

Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted or forged into spikes; framed guard bars; barred iron doors ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165

Applying two coats of synthetic enamel paint over one coast of pink primer on wooden surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface complete. 35/SR/Bldg/19-20 - 55 37/SR/Bldg/19-20 - 46 34/SR/Bldg/19-20 - 50

Applying two coats of synthetic enamel paint over a coat of red oxide primer on steel iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface complete. 35/SR/Bldg/19-20 - 50 37/SR/Bldg/19-20 - 08 34/SR/Bldg/19-20 - 06

S&F Butt hinges 100 mm size medium weight cold rolled mild steel. 35/SR/Bldg/19-20 - 51 37/SR/Bldg/19-20 - 75 34/SR/Bldg/19-20 - 60

S&F Mild steel barrel tower bolt 150 mm long stove enamelled black with bright bolt 35/SR/Bldg/19-20 - 34 37/SR/Bldg/19-20 - 48 34/SR/Bldg/19-20 - 50

S&F Mild steel pressed handles 125 mm size oval type stove enamelled black 35/SR/Bldg/19-20 - 34 37/SR/Bldg/19-20 - 48 34/SR/Bldg/19-20 - 50

Mild steel sliding door bolt plate type stove enameled black with bright bolt not less than 12mm dia with & including a minimum of 6 bolt & nut four on bolt plate & 2 on staple plate & fixed length of bolt 300 mm. 35/SR/Bldg/19-20 - 04 37/SR/Bldg/19-20 - 05 34/SR/Bldg/19-20 - 10

S&F Sheet glass 3.0mm thick, ordinary quality & glazing with oil putty in square n exc 0.5 sq.m in each pane

S&F frosted glass 3.0mm thick, pin head type & glazing with oil putty in squares n exc 0.5 sq.m in each pane

S&F in repairs Vitreous China squatting pan, `Orrisa' pattern, water closet of size 580 x440 mm white, with integral foot rests (excluding flushing cistern & flush pipe) closet

S&F in repair PVC valve less syphonic action type low level flushing cistern white with inlet ball valve float and handle incl bracket 10 Lit capacity Make:- slimline / Paryware or as approved by GE

Dismantalling of cast iron or reinforced concrete drain pipe jointed in cement mortar and taking out of trenches if re quired internal dia of pipe 75mm/100 mm

S&F Cast iron 75mm bore Sand cast soil, waste & vent pipes, in any length with or without ears with cement joints, laid in trenches or in floors,

S&F Cast iron 100 mm bore Sand cast soil, waste & vent pipes, in any length with or without ears with cement joints, laid in trenches or in floors,

S&F Cast iron 75 mm bore Sand cast soil, waste & vent pipes, in any length with or without ears with cement joints, fixed to walls,

All as per item No 26 above but 100 mm bore

S&F Cast iron 75 mm bore Bends (any radius),diminishing pieces or tapers (larger bore meassured )

All as per item No 28 but 100 mm bore

S&F cast iron 75 mm bore branches pieces single (equal or unequal )ordianry or inverted (spigot or socket type ) or with paralllel branches

All as per item no 30 but 100 mm bore

S&F cast iron 100 mm bore cowls

M&L cast iron floor trap 75 mm dia with grating incliuding jointing to waste pipe fixed in cement concrete (1:2:4) type B-1, complete.

S&F 1000 Ltrs capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantalling old water tank

S/F in repairs of 25 mm Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed

S&F in repairs Bib taps 15 mm bore, cast copper alloy with crutch or butterfly handle,screwed down, screwed for iron pipe or for brass ferrule fancy type

S&F in repairs Stop valve 15 mm bore, cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions 35/SR/Bldg/19-20 - 12

All as per item no 37 but 20 mm bore 35/SR/Bldg/19-20 - 12 37/SR/Bldg/19-20 - 04 34/SR/Bldg/19-20 - 04

All as per item no 37but 25 mm bore 35/SR/Bldg/19-20 - 12 37/SR/Bldg/19-20 - 04 34/SR/Bldg/19-20 - 04

Dismantling and taking up or down the existing unserviceable GI pipe and M&L for new galvanised 15 mm bore steel water tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors 35/SR/Bldg/19-20 - 70 37/SR/Bldg/19-20 - 50 34/SR/Bldg/19-20 - 25

All as per item no 40 but 20 mm bore 35/SR/Bldg/19-20 - 30 37/SR/Bldg/19-20 - 50 34/SR/Bldg/19-20 - 20

All as per item No 40 but 25 mm bore 35/SR/Bldg/19-20 - 30 37/SR/Bldg/19-20 - 50 34/SR/Bldg/19-20 - 05

M/L for Mild steel angle iron door frame 40x40x6mm conforming to Fe 410.0 incl.12 mm dia deformed bars( Tie bar) for strengthening at bottom of chowkhat incl.cutting floor to accommodate strengthening bar & making good in PCC(1:2:4) type B0.

S&F MS holdfast, hook and pintle hinges, large hasp and staples, clamps, hooks for hanging fans and similar small articles conforming to Fe-290 Gde E-165 including necessary welding etc. and fixed in position.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises. 35/SR/Bldg/19-20 - 350 37/SR/Bldg/19-20 -373 34/SR/Bldg/19-20 - 190

S&F Coloured Glazed ceramic tiles size 300x450mm x 7mm thick edge cut/ joint free , on walls etc in the combination of light and dark shed concept . set & jointed in neat cement slurry & pointed in white/coloured cement to match set over 15mm thick plaster in cement mortar (1:4) Pattern and colour as directed by Engineer-in-Charge.

M&L for coloured Non Skid Ceramic tiles joint free 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm , in floors etc, set and jointed in neat cement slurry or tiles addeshive and pointed in white or coloured cement to match laid over 15 mm thick screed bed in cement mortar (1:4).

S&Fshower arm 15 mm size , 195 mm long with bend of 45 degree with flange of CP fixed in repair

M&L Machine cut kota stone slab flooring 20-25 mm thick laid over 15 mm thick screed bed in CM (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete 35/SR/Bldg/19-20 - 30 34/SR/Bldg/19-20 - 08

Demolition of stone setting paving of any description of any thickness laid ,bedded and pointed in any mortar. 35/SR/Bldg/19-20 - 3.6 34/SR/Bldg/19-20 - 0.8

M/L 50 mm thick stone patti setting and jointed in CM (1:4)

Demolition of cement concrete in roof and floor other than ground floor

M/L for 75 mm thick PCC (1:4:8) type D-2, using 40 mm graded stone aggregate as sub base to floor. 35/SR/Bldg/19-20 - 40 34/SR/Bldg/19-20 - 01

M/L for 40 mm thick PCC (1:2:4) type B-1, using 20 mm graded stone aggregate finishing cement concrete surface even and smooth with out using extra cement.

Applying two coats of oil bound distemper on new wall surface including preparation of surface

Applying three coats of white wash on ceiling surface including preparation of surface

Applying two coats of cement base paint white or tinted on new wall surface including preparation of surface

M&L 50 mm thick PCC type C-1 (1:3:6) using 20 mm graded stone aggregate finished even and smooth without using extra cement as in plinth protection 35/SR/Bldg/19-20 - 70 37/SR/Bldg/19-20 - 75 34/SR/Bldg/19-20 - 15

Demolition of PCC in roof covering, kerbs, roof kerbs, benching, coved fillets etc including old decayed water proofing treatment of any type all as directed by Engineer-in-charge. 35/SR/Bldg/19-20 -12.60 37/SR/Bldg/19-20 - 8.75

M&L for surface preparation by removal of all loose particle to ensure clean, smooth and dry surface and laying 40mm thick PCC type B-0, (1:2:4) using 12.5mm graded stone aggregate finished even & smooth without using extra cement to cover negative slope into prop with WPC @ 3% weight of cement. 35/SR/Bldg/19-20 -310 37/SR/Bldg/19-20 -300

The surface shall be painted with one coat of polymeric primer @ 0.30 Kg per sqm, conforming to IS : 3384. A layer of APP based polymeric membrane, 3 mm thick (min), weighing not less than 3.5 Kg/m2 reinforced with polyster non woven fabric ( weighing not less than 150 gms/ Sqm). Application of polymeric membrane shall be by torch application all as per manufacturer instructions 35/SR/Bldg/19-20 -310 37/SR/Bldg/19-20 -300

M&L applying one coat of silver paint on APP mebrances. 35/SR/Bldg/19-20 -310 37/SR/Bldg/19-20 -300

Supplying only Integral waterproofing compound 35/SR/Bldg/19-20 -50 37/SR/Bldg/19-20 -20

PCC 1:2:4 mix type B-0 (using 12.5 mm graded aggregate ) as in roof kerbs rounded or chamfered on edges

Demolition of Brick work built in cement mortar

Brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM (1:4)

M&L Brickwork with subclass `B' bricks, straight or curved on plan any radius in half brick thick wall, built in CM (1:4)

S&F aluminium anodised floor door stopper overall length 140 mm double legged with rubber shoe, fixed to bottom rail of door as directed.

S&F fixed in repairs MS spring hinges 300 mm, ordinary rat tail rod pattern including roller and roller plate complete fixed to wooden/ angle iron chowkats .

Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan and n exc 1.5m in depth and getting ou in soft/loose soil

M/L Cement concrete (1:4:8 ) type D-2, using 40 mm graded stone aggregates in foundations filling and mass concrete.

Plain cement concrete 1:4:8 type D2 (Using 40mm graded crushed stone aggregates) as in bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested for 150mm bore

Reinforced concrete NP2 drain pipe 150mm internal dia laid in trenches on concrete bed and jointed, complete all as specified. (excavation, earth work and concrete bed and haunching shall be measured and paid for separately)

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc. 25 cm soft / loose soil.

Removing excavated material n exc. 50m and depositing wheredirected at a level n exc. 1.5 m above the starting point

M&L for PCC 1:2:4 type B-1 (20mm graded stone aggregate) as in surface channels and drains all as specified

Extra for forming fair finished drain or channel of manholes inner girth not exceeding 30cm in cement concrete using extra cement including forms, mould mitered stopped ends etc all as specified.

Add or deduct from above ser item No (78) above for each 25mm girth of part of thereof over 30mm

M/L Providing cement concrete in lintels upto 1.5 m clear span, cills, steps: seismic and other similar bands, plinth courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, appex 1:2:4 type B-1( 20 mm graded aggregates)stones, bed plates as directed

M/L 5 cm thick sand stone slabs on manhole covers ,landings, cover stones, templates, etc, n exc. 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and in cement mortar 1:4, complete,5 cm thick

S&F Flush pipe of polyethylene of low or high density of PVC, 32 mm dia, for low level cistern

S&F in repairs PVC connections 15mm size with PTMT nuts of length 450mm

S&F in repairs Vitreous China wash basin, white, flat back, size 550x400mm excluding taps, waste chain & plug & porcelain stopper but including brackets & Waste fittings 32mm bore, brass, CP 35/SR/Bldg/19-20 -12 37/SR/Bldg/19-20 - 8 34/SR/Bldg/19-20 - 2

S&F in repair CP Pillar taps fancy type 15 mm bore, cast copper alloy, with capstan heads screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks & fly-nuts, screwed for iron pipe

S&F PVC Waste Pipe 32 mm bore for WHB

S&F in repairs Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe including PVC pipe (excluding flushing cistern, flush pipe and waste pipe).

37/SR/Bldg/2019-20/Q3W S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted & fixed in position all as specified in SSR Part I 500 Ltrs Capacity including Dismantling water tanks & removing to store 37/SR/Bldg/19-20 - 8 34/SR/Bldg/19-20 - 2

S&F in repairs Ball brass valves 20mm bore, high pressure, with polythene float & flynut complete, screwed for iron pipe or brass ferrule and fixed in repair 37/SR/Bldg/19-20 - 8 34/SR/Bldg/19-20 - 2

Racking out joints / pointing to random rubble masonry or polygonal rubble masonry in cement mortar

Raised pointing to random rubble masonry or polygonal rubble . Uncoursed or brought upto course in cement mortar 1:3

M&L rendering 15 mm thick in CM(1:6) on stone masonry walls or concrete surface, surface finished even and smooth without using extra cement complete all as specified.

35mm thick 2nd class hard wood factory made Glazed and skelton shutters open rebated & prepared to receive glass gauze etc (without sash bars) edges of framing plain chamfered / rounded fitted without & mitred beads for securing glass etc size of members of shutters as specified in SSR Part-I Section 8 Clause 8.2 (a) supplied & fitted to chowkats. 37/SR/Bldg/19-20 - 08 34/SR/Bldg/19-20 - 12

Cutting holes in stone / brick walls built in CM for inserting hold fast & making good dismantled portion in CM (1:3) depth of embaded portion of holdfast n. exc half brick 37/SR/Bldg/19-20 - 56 34/SR/Bldg/19-20 - 30

Hacking out old broken glass pane (any thickness, size, quality/ description) from metal/wood frame including punching or drilling out old glass panes, pins, springs, clips & providing & fixing new ones 3 mm thick plain sheet glass ordinary quality in square not exceeding 0.50 Sqm in each pane. glazed with oil putty. 37/SR/Bldg/19-20 - 20 34/SR/Bldg/19-20 - 10

S&F in repair Sheet glass 4.0mm thick, ordinary quality & glazing with oil putty in square n exc 0.5 sq.m in each pane 37/SR/Bldg/19-20 - 03 34/SR/Bldg/19-20 - 10

S&F Galvanised mild steel wire cloth, 0.56 nominal dia of wire & average width of aperture 1.18mm with tinned tacks, or galvanised wire staples. 37/SR/Bldg/19-20 - 4.8 34/SR/Bldg/19-20 - 6.0

S&F Coloured Glazed ceramic tilessize 300x450mm x 7mm thick edge cut/ joint free , on walls etc. set & jointed in neat cement slurry & pointed in white/coloured cement to match over 15mm thick plaster in CM(1:4) 37/SR/Bldg/19-20 - 253 34/SR/Bldg/19-20 - 100

S&F Coloured Non Skid ceramic tiles 6 to 7mm thick edge cut/ joint free (squares/ rectangular) area of each tile exc. 0.11 sqm but not exc. 0.18 sqm, in floors etc. set & jointed in neat cement slurry & pointed in white or coloured cement to match over 15mm thick screed in CM(1:4). 37/SR/Bldg/19-20 - 120 34/SR/Bldg/19-20 - 90

S&F in repairs sink made of stainless steel 1.0 mm thick for kitchen with plugs, washers and wastes, including bedding in cement mortar on to dwarf wall or with & including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410 x 330 x160 mm including waste pipe of polythelene of low or high density or PVC 32mm dia & waste fitting brass chromium plated for 32mm bore with long screwed shanks and fly nuts including making holes in stone walls for brackets and fixed in CM 1:3 or PCC 1:2:4 type B0 complete. 37/SR/Bldg/19-20 - 08 34/SR/Bldg/19-20 - 02

S&F PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors 37/SR/Bldg/19-20 - 24 34/SR/Bldg/19-20 - 08

S&F PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors 37/SR/Bldg/19-20 - 24 34/SR/Bldg/19-20 - 08

S&F PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints fixed to walls 37/SR/Bldg/19-20 - 28 34/SR/Bldg/19-20 - 10

S&F PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints fixed to walls 37/SR/Bldg/19-20 - 28 34/SR/Bldg/19-20 - 15

S&F PVC (SWR) bends any radius 75mm dia 37/SR/Bldg/19-20 - 15 34/SR/Bldg/19-20 - 04

S&F PVC (SWR) bends any radius 110mm dia 37/SR/Bldg/19-20 - 15 34/SR/Bldg/19-20 - 04

S&F PVC (SWR), junction single, (Single T) equal or unequal 75mm dia 37/SR/Bldg/19-20 - 16 34/SR/Bldg/19-20 - 04

S&F PVC (SWR), junction single, (Single T) equal or unequal 110mm dia 37/SR/Bldg/19-20 - 16 34/SR/Bldg/19-20 - 04

S&F PVC (SWR) vent cowl 110mm dia 37/SR/Bldg/19-20 - 08 34/SR/Bldg/19-20 - 04

S/F in repairs stop valves, cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends fancy type chromium plated with long shank and cup (concealed type), 15 mm 37/SR/Bldg/19-20 - 08

S/F in repairs brass CP Angle stop cock fancy type concealled type long body,15 mm bore. 37/SR/Bldg/19-20 - 16 34/SR/Bldg/19-20 - 10

S/F in repairs Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed-15mm 37/SR/Bldg/19-20 - 08 34/SR/Bldg/19-20 - 02

S/F in repairs Bib taps, cast copper alloy ,screwed down, screwed for iron pipe or for brass ferrule and fixed, fancy type chromium plated long body complete. 37/SR/Bldg/19-20 - 24 34/SR/Bldg/19-20 - 10

S/F in repairs PVC connections 15mm size with PTMT nuts of length 300mm. 37/SR/Bldg/19-20 - 16 34/SR/Bldg/19-20 - 06

M&L Chromium plated Overhead Rain shower with relvoling joint and 115mm long shower arm with wall flange 15 mm bore fancy type any colour half turn (Make-MARC CAT PART NO MOR 1260 & 1240 or equivalent of GEM , JAQUAR) fixed in repair. 37/SR/Bldg/19-20 - 08 34/SR/Bldg/19-20 - 02

S&F in repair PVC valve less syphonic action type low level flushing cistern coloured with inlet ball valve float and handle incl bracket 10 Lit capacity ( Make-HINDWARE CAT PART SLEEK PLUS or equivalent) fixed in repair 37/SR/Bldg/19-20 - 08 34/SR/Bldg/19-20 - 02

S&F in repair Stop valves 20 mm bore, cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions 37/SR/Bldg/19-20 - 04 34/SR/Bldg/19-20 - 04

All as per item No 117 above but of 25mm bore 37/SR/Bldg/19-20 - 04 34/SR/Bldg/19-20 - 04

Dismantling of old U/S grating of any description or size and S&F PVC grating 125mm dia of weight not less than 40gm for floor trap / Nahani trap. 37/SR/Bldg/19-20 - 16 34/SR/Bldg/19-20 - 03

S&F in repairs vitreous china water closet Indian type 580 x 440 mm white with itergal footrest including provn of lime concrete bedding including connections to flushing cistern/pipe and making good disturbed portion to match existing surface complete all as directed including flushing cistern and flushing pipe. 37/SR/Bldg/19-20 - 08 34/SR/Bldg/19-20 - 02

S&F Soap dish vitreous china white approximate size 160 x 160 x 90mm equivalent 37/SR/Bldg/19-20 - 08 34/SR/Bldg/19-20 -02

Preparing new plastered surfaces including scrapping and applying three coat of white wash on ceiling 37/SR/Bldg/19-20 - 300 34/SR/Bldg/19-20 - 100

Preparing new plastered surfaces including scrapping and applying two coat of Dry distemper all as specified and directed by Eng-in-Charge. 37/SR/Bldg/19-20 - 450 34/SR/Bldg/19-20 - 300

Demolition of PCC in ground floors and pavings not exc 15cm thickness (below or above ground level ) 37/SR/Bldg/19-20 - 04 34/SR/Bldg/19-20 - 01

Factory made steel window with side hung shutters incl projecting type hinge with steel handle and steel peg stay complete with glazing bars dovetailed or welded incl. taking down old window. 37/SR/Bldg/19-20 - 08 34/SR/Bldg/19-20 - 06

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, & steel peg stay, complete without glazing bars, dovetailed or welded incl. taking down old window. 37/SR/Bldg/19-20 - 08 34/SR/Bldg/19-20 - 06

S&F Sheet glass 4.0mm thick, ordinary quality & glazing with oil putty in square n exc 0.5 sq.m in each pane. 37/SR/Bldg/19-20 - 08 34/SR/Bldg/19-20 - 08

S&F prosted glass 4.0mm thick, pin head type & glazing with oil putty in squares n exc 0.5 sq.m in each pane 37/SR/Bldg/19-20 - 10 34/SR/Bldg/19-20 - 08

M/L Fancy type MS bracket suitable for curtain rod fixed in repair. 37/SR/Bldg/19-20 - 40 34/SR/Bldg/19-20 - 30

M&l of 20 mm dia Drapery Fancy type curtain rod fixed in repair. 37/SR/Bldg/19-20 - 70 34/SR/Bldg/19-20 - 30

M/L for caps/ side Bulbs PVC suitable for curtain rod fixed in repair. 37/SR/Bldg/19-20 - 40 34/SR/Bldg/19-20 - 30

34/SR/Bldg/19-20 M&L for 75 mmwide/depth patti setting and jointed in CM(1:4)

S&F of pressed steel cup board shutter with frame , the frame shall be made of 1.25 mm thick and shutter made of 1.00mm thick PGI sheet with 6 Nos of 100 mm long steel hinges godrej pattern locking arrangement including 12 mm dia verticle rod all as per TD Drg No CEJZ/TD/2004/29. The surface shall be spary painted with two coats of S/E maint over a coat of zinc chrome primer over cleared surface complete all as specified and shown on drg including taking down old complete all as directed

34/SR/Bldg/19-20 (E/M Portion) Taking down carefully copper/ aluminum point wiring (light, fan, socket or power) complete including all fittings such as switches, ceiling roses, pendants, sockets, lamp holder, fan regulator brackets light fittings tube light fitting, bell/ buzzer etc (excluding fans) and making good disturbed surfaces of wall floors, ceiling etc complete all as specified and as directed by Engr-in-Charge to match with existing surface. E26 34/SR/Bldg/19-20 - 57 35/SR/Bldg/19-20 - 180 37/SR/Bldg/19-20 - 220

M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 1.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and unwelded sunken galvanized pressed steel terminal boxes of thickness not less than 1.2 mm covered with 3 mm thick phenolic laminated white sheet cover for mounting switches, sockets, fan regulators as required for the following :-

One light / fan controlled by one switch. 34/SR/Bldg/19-20 - 32 35/SR/Bldg/19-20 - 120 37/SR/Bldg/19-20 - 128

One socket outlet 6 amp controlled by one switch on the same board with other switches. 34/SR/Bldg/19-20 - 8 35/SR/Bldg/19-20 - 16 37/SR/Bldg/19-20 - 24

One socket outlet 6 amp controlled by one switch on indepdendent board. 34/SR/Bldg/19-20 - 8 35/SR/Bldg/19-20 - 20 37/SR/Bldg/19-20 - 32

One bell point controlled by one bell push. 34/SR/Bldg/19-20 - 2 37/SR/Bldg/19-20 - 8

One light point controlled by two, two way switches. 34/SR/Bldg/19-20 - 1 37/SR/Bldg/19-20 - 4

M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 2.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 2.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and sunken galvanized pressed steel terminal box of thickness not less than 1.2 mm covered with 3 mm thick phenolic laminated white sheet cover for mounting switches, sockets as required for one 16 amp socket outlet point controlled by one switch on independent board. 34/SR/Bldg/19-20 - 06 35/SR/Bldg/19-20 - 24 37/SR/Bldg/19-20 - 24

Supply&.Fixing Switch piaon type 230/ 250V grade on top covers (catered in point wiring above) :-

S&F switch piano flush button single pole one way 6 amp complete. 34/SR/Bldg/19-20 - 48 35/SR/Bldg/19-20 - 156 37/SR/Bldg/19-20 - 184

S&F switch piano flush button single pole one way 16 amp complete. 34/SR/Bldg/19-20 - 06 35/SR/Bldg/19-20 - 24 37/SR/Bldg/19-20 - 24

S&F bell push, flush type, 6 amp 240 volts complete. 34/SR/Bldg/19-20 - 02 37/SR/Bldg/19-20 - 08

S&F switch flush type, 6 amp, single pole, two way complete. 34/SR/Bldg/19-20 - 02 37/SR/Bldg/19-20 - 08

S&Fixing Socket outlet multipurpose use flush mounting type, 230/250 Volts grade(ISI Marked) on top covers (catered in point wiring above) :-

S&F socket outlet 2 in 1, 2 & 3 pin, 6 amp, flush type complete. 34/SR/Bldg/19-20 - 16 35/SR/Bldg/19-20 - 36 37/SR/Bldg/19-20 - 56

S&F socket outlet 2 in 1, 3 pin 6 & 16 amp flush type complete. 34/SR/Bldg/19-20 - 06 35/SR/Bldg/19-20 - 24 37/SR/Bldg/19-20 - 24

S&F angle holder, insulated polycabonate body with back plate complete. 34/SR/Bldg/19-20 - 14 35/SR/Bldg/19-20 - 30 37/SR/Bldg/19-20 - 32

S&F ceiling rose 3 plates polycarbonate body complete. 34/SR/Bldg/19-20 - 18 35/SR/Bldg/19-20 - 48 37/SR/Bldg/19-20 - 72

S&F hum free electronic step fan regulator 120 - 280 volts of 100 watt capacity (socket type) including connecting up complete. 34/SR/Bldg/19-20 - 06 37/SR/Bldg/19-20 - 24

S&F door bell, AC, 240 volts, single pole complete. 34/SR/Bldg/19-20 - 02 37/SR/Bldg/19-20 - 06

Supply & fixing Energy saving envirnmental friendly, LED Light fittings 1 x 20 W 1200mm E lite LED Curve, high lumen batten with efficacy of 100+ lumens , impact proof,surface/wall mounting with PC housing in opal finish suitable for wet location with high brightness LEDs complete with all accessories pre-wired twin core twisted flexible copper conductor cable with suitable size. Make Havells Cat No LHEXBXPNIN1W020 or equivalent in Syska/Crompton/Bajaj 34/SR/Bldg/19-20 - 08 35/SR/Bldg/19-20 - 40 37/SR/Bldg/19-20 - 32

Supply & fixing , LED Light fittings 1 x 10W ,240 volt( size-2 feet/600 mm) , long life, corrosion resistant , surface/wall mounting IP 66 luminaire with PC housing in opal finish suitable for wet location with high brightness LEDs complete with all accessories pre-wired twin core twisted flexible copper conductor cable with suitable size. Make Havells Cat No LHEXARP7PN1W009 or equivalent in Syska/Crompton/Bajaj 34/SR/Bldg/19-20 - 04 35/SR/Bldg/19-20 - 24 37/SR/Bldg/19-20 - 16

Supply & fix wall Bracket light CITY-1 made of polycarbonate body suitable for 15 watt retrofit LED B22 Base including including 10W LED Lamp with all accessories pre-wired twin core twisted flexible copper conductor cable with suitable size. Make Havells Cat No LHDL02160099 or equivelent model in Bajaj/ Philips/Syska 34/SR/Bldg/19-20 - 06 37/SR/Bldg/19-20 - 24

Supply and fix heavy duty exhaust fan 300 mm size ,220/240Volt steel body, 1400 RPM with mounting ring and louvers.including three core flexible PVC insulated multi stranded copper conductor cable of size 1.5 sqmm from ceiling rose/connector to fan Make:- Havells, Model No- turbo force or equivalent of Bajaj/CG 34/SR/Bldg/19-20 - 02 35/SR/Bldg/19-20 - 10 37/SR/Bldg/19-20 - 08

M&L for Sub main wiring with two runs of 6 Sqmm single core FRLS PVC insulated but in unsheathed multi stranded copper conductor cable 1100 volts grade drawn through and including of 25mm dia PVC rigid conduit medium with conduit accessories and fixed to the surface of wall/ceiling as per ISI including 6.0 Sqmm PVC insulated copper conductor earth continuity wire. 34/SR/Bldg/19-20 - 30 35/SR/Bldg/19-20 - 165 37/SR/Bldg/19-20 - 50

S&F Factory made, sheet distribution boards, double door protection class IP-42 suitable for mounting MCB/ MCCB, confirming to IS-13032, IS-8623, BS-5484 of the under mention rating

SP&N12 ways 34/SR/Bldg/19-20 - 02 37/SR/Bldg/19-20 - 08

S&F MCB distribution board, powder coated, CRCA steel sheet, degree of protection IP 43 - IK 09 with reversible double door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces of following ratings & ways. Make - Legrand cat ref no 507611 or equivalent in Schneider or Hager as approved.

SP & N 8 Ways

SP & N 4 Ways

S&F Factory made, sheet distribution boards, double door protection class IP-42 suitable for mounting MCB/ MCCB, confirming to IS-13032, IS-8623, BS-5484 r of the under mention rating

TPN DB 4 way

S&F MCB 10 KA confirming to IS-8828 : 1996, IEC-898 : 1995 rupturing capacity of the under mentioned type and rating :-

SP 5 to 32 amps 34/SR/Bldg/19-20 - 18 37/SR/Bldg/19-20 - 80

SP 32 to 63 amps 34/SR/Bldg/19-20 - 04 37/SR/Bldg/19-20 - 16

TPN 100 Amp 10 KA 37/SR/Bldg/19-20

S&F MCBs of 'C' series having breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs of Single pole 6 to 32 amp ratings. Make - Legrand cat ref no 408587 to 408595 or equivalent in Hager or Schneider as approved 35/SR/Bldg/19-20

S&F MCBs of 'C' series having breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs of Four pole 40 to 63 amp ratings. Make - Legrand cat ref no 408700 to 408702 or equivalent in Hager or Schneider as approved. 35/SR/Bldg/19-20

S & F Ceiling Fan size 1200 mm, 3 blades, white color, single Phase AC 230 volts complete with all accessories pre-wired twin core twisted flexible copper conductor cable with suitable size. 34/SR/Bldg/19-20 - 02 37/SR/Bldg/19-20 - 08

M&L for earthing with galvanised steel earth plate electrode 600 mm x 600 mm x 6 mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4 mm dia by means of steel bolts, nuts, check nuts and washers all as shown in electrical plate no 3 of MES Schedule Part-I connected to earthing point and testing on completion with and including 15 mm bore light grade G.I. protection pipe (upto 7.5 metre beyond outer edge of earth pit) PCC pit in mix 1:3:6 type C1 with RCC 1:2:4 type B-1 40 mm thick cover reinforced with 6 mm dia M.S bars 3 nos both ways with lifting hook made out of 6 mm dia bar, watering arrangement with funnel and wire mesh and 20 mm bore light grade G.I. watering pipe, common salt and charcoal filling, necessary excavation and earth work complete. 35/SR/Bldg/19-20

M&L Earthing complete as per electrical plate No. 5 of MES SSR Part-I with galvanised steel earth plate electrode 60cmx60cmx6.0mm thick, buried directly vertically in ground in a pit depth not less than 2.25 metres below ground level with top edge of earth plate at a depth not less then 1.5 metre below normal ground level connected to and including galvanised iron or steel earth strip 25mm x 4mm by means of bolts, nuts check nuts and washers of galvanised iron or steel. Earthing strip shall be protected by galvanised iron or steel pipe 40mm bore light grade and connected to continuous earth wire on pole / test point. Watering pipe shall be 20 mm bore GI medium grade. The earthing shall be of inclusive of excavation & earth work in any type of soil, charcoal, salt, funnel, PCC(1:2:4) pit and 50 mm RCC(1:1/2:3) cover complete all as specified & tested complete. 37/SR/Bldg/19-20

M/S M.K.Constructions

MSR INFRATECH

Lakshmi Enterprises

J.J.ENGINEERING

Ravi Enterprises

M/S JALANDRA CONSTRUCTIONS

S.R.Enterprises

M/S Mohan Lal Gupta