RENOVATION /UPGRADATION OF UG CABLE AND FEEDER PILLORS INSTALLED AT STS BSF NOW CEDCO BSF BANGLORE

Amount

Supplying and fixing of 630 Amp, MCCB, 4 pole, 36KA Breaking Capacity as per IEC 60947-2, 100% Icu as per IEC 60947-2 in existing panel of Schneider make, Model - LV563309 or equivalent make Legrand /L&T.

Supplying and fixing of 250 Amp, MCCB, 4 pole, 25KA Breaking Capacity as per IEC 60947-2, 100% Icu as per IEC 60947-2 in existing panel of Schneider make, Model - LV525313 or equivalent make Legrand /L&T.

Supplying and fixing of 200 Amp, MCCB, 4 pole, 25KA Breaking Capacity as per IEC 60947-2, 100% Icu as per IEC 60947-2 in existing panel of Schneider make, Model - LV525312 or equivalent make Legrand /L&T.

Supplying and fixing of 160 Amp, MCCB, 4 pole, 25KA Breaking Capacity as per IEC 60947-2, 100% Icu as per IEC 60947-2 in existing panel of Schneider make, Model - LV516313 or equivalent make Legrand /L&T.

Supplying and fixing of 100 Amp, MCCB, 4 pole, 25KA Breaking Capacity as per IEC 60947-2, 100% Icu as per IEC 60947-2 in existing panel of Schneider make, Model - LV510317 or equivalent make Legrand /L&T.

Supplying and fixing of 63 Amp, MCCB, 4 pole, 25KA Breaking Capacity as per IEC 60947-2, 100% Icu as per IEC 60947-2 in existing panel of Schneider make, Model - LV510315 or equivalent make Legrand /L&T.

Supplying and fixing of 630 Amp, On Load Changeover Switches(without Enclosure), 4 pole, Conforms to IEC 947-3, EN - 60947-3 AC-23A, Front operated 415V, 50Hz in existing panel of HPL make, Model - C06304POAV or equivalent make Schneider/Legrand /Crompton.

SITC of HT 11 KV switch Air Break Gang operated triple pole ,,horizontal type double break mechanically operated mounted on insulators and steel frame with operating mechanism system of Jaipuria/Mysore electrical industries/Pactil/Rashtriya Electrical make.

SITC of Horn Gap fuse two post insulator of 400 Amp capacity suitable for 11/0.415 KV, 400 Kva transformer per phase complete with GI channel mounting as required of High tension switch gear limited/Jaipuria /Mysore electrical industries/Pactil/Rashtriya Electrical make.

Dehydration of transformer Oil of 400 Kva, 11/0.415 KV transformer at site.

supplying and filling transformer oil in the existing 11/0.415 KV transformer of Transoil/IOC/HP/BP make.

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

3½ X 35 sq. mm (32mm)

3½ X 50 sq. mm (35mm)

3½ X 70 sq. mm (38mm)

3½ X 95 sq. mm (45mm)

3½ X 120 sq. mm (45mm)

3½ X 240 sq. mm (62mm)

3½ X 300 sq. mm (70mm)

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.

Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. , complete as required.

63 mm dia (OD-160 mm & ID-135 mm nominal)

160 mm dia (OD-160 mm & ID-135 mm nominal)