REPAIR MAINT OF WATER SUPPLY SYSTEM LEANING OF UG OH TANKS AND REPAIR MAINTENANCE OF RAISING MAIN DI CI G MS PIPE LINES, VALVES,E DEVELOPMENT OF BOREWELL PUMPS MOTORS R AND D OTHER CONNECTED WORKS AT TECHNICAL AREA UNDER GE I RCI HYDERABAD

Amount

Taking up or down 20mm bore steel tubing along with connections and all fittings from trenches / walls / floors complete all as directed.

All as per item No 1 above but 25mm bore of pipe.

All as per item No 1 above but 40mm bore of pipe.

All as per item No 1 above but 50mm bore of pipe

All as per item No 1 above but 80mm bore of pipe.

All as per item No 1 above but 100mm bore of pipe Note for item No 1 to 6: Excavation and earthwork if any will be measured and paid separately.

S&F, 20mm bore steel water tubing, medium grade, ISI marked, galvanized, including all fittings such as bends, tees, elbows, reducers, unions, plugs, sockets etc., laid in trenches or fixed to walls and ceilings or concealed in walls, ducts/ceilings or laid in floors complete all as specified and directed.

All as per item No 7 above but 25mm bore of pipe.

All as per item No 7 above but 40mm bore of pipe.

All as per item No 7 above but 50mm bore of pipe.

All as per item No 7 above but 80mm bore of pipe.

All as per item No 7 above but 100mm bore of pipe.

S&F in repairs, 15mm dia Gun metal, globe or gate valves with iron wheel head, ISI marked screwed both ends for iron/GI pipe and fixed complete all as specified and as directed.

All as per item No 13 above but 20mm dia globe or gate valve.

All as per item No 13 above but 25mm dia globe or gate valve.

All as per item No 13 above but 40mm dia globe or gate valve.

All as per item No 13 above but 50mm dia globe or gate valve.

Taking up or down CI/DI pipes of 100mm bore with all pipe fittings from trenches, supports etc., complete all as directed.

All as per item No 18 above but 150mm bore of pipe.

All as per item No 18 above but 200mm bore of pipe. Note for item No 18 to 20 Excavation and earthwork will be measured and paid separately.

Supply, laying, jointing and testing 100mm bore Ductile Iron pipes with spigot and socketed ends, centrifugally cast, class K-9, conforming to IS in any length with blue epoxy coating laid in trenches complete including jointing by using elastomeric gasket all as specified and directed.

All as per item No 21 above but 150mm bore of pipe.

All as per item No 21 above but 200mm bore of pipe.

M&L, DI fittings for pipes upto 200mm bore such as bends (any type, radius and angle) tapers any type, (straight, bend, increasing, decreasing or double socket etc.) Tee pieces single branch. 'Y' junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs complete all as specified and as directed.

Supply, install, test and commissioning of 80mm bore CI Sluice Valve in repairs, Class PN-1.6, both ends flanged and drilled type with stainless steel spindle including wheel, suitable rubber gasket for flanged joints, ISI marked, including provision of necessary jointing materials nuts and bolts, washers etc., complete all as specified and directed.

All as per item No 25 above but 100mm bore Sluice Valve.

All as per item No 25 above but 150mm bore Sluice Valve.

All as per item No 25 above but 200mm bore Sluice Valve.

S&F in repairs, 50mm bore, PN-1.0 Non Return valve in CI body with bypass arrangement, ISI marked including bolts, nuts & washers and packing material complete all as specified and as directed.

All as per item No 29 above but 80mm bore Non Return Valve.

All as per item No 29 above but 100mm bore Non Return Valve.

Cleaning of over head service tanks (RCC /PVC) of 500litres capacity positioned over roof of buildings by removing the ball valves, plugging inlet, draining out water, removing all mud, silt accumulated at bottom of tank, cleaning thoroughly and washing with chlorine solution for antibacterial disinfections and refixing the ball valves and marking the date of cleaning, next due date of cleaning with white synthetic enamel paint over black background complete all as directed.

All as per item No 32 above but tank of 750litres capacity

All as per item No 32 above but tank of 1000litres capacity

All as per item No 32 above but tank of 2000litres capacity

All as per item No 32 above but tank of 3000litres capacity

S&F in repairs, 20mm bore premium PTMT Ball valves, high pressure, with epoxy coated aluminium rod and high density plastic ball and fly nut complete, screwed for iron/GI pipe or brass ferrule complete all as specified and directed. Make:Prayag CAT No152 or equivalent as approved by GE

S&F in repairs, 25mm bore premium PTMT Ball valves, high pressure, with epoxy coated aluminium rod and high density plastic ball and fly nut complete, screwed for iron/GI pipe or brass ferrule complete all as specified and directed. Make:Prayag CAT No153 or equivalent as approved by GE

S&F in repairs, PVC cover suitable for 500/750/1000 /2000 litres capacity water tanks complete all as specified and directed.

Bailing out the water from the semi underground sump 10,000 litres capacity at CMCD and Carbon Carbon Pump House without causing any interruption to regular water supply, cleaning the walls, roof and floor thoroughly by using scrapper, removing the deposited scales/ fungus/ sludge/dirt etc., cleaning thoroughly with water and bleaching powder, finally cleaning with chlorine solution for complete anti bacterial disinfections complete including removing and disposing of the rubbish materials of the site and writing date of cleaning of the sump on the black ground/board with white synthetic enamel paint complete all as specified and directed.

All as per item No. 40 above but 50,000 Litres capacity UG sump at MEMS pump house

All as per item No. 40 above but 1,90,000 Litres capacity UG sump at CMCD pump house

All as per item No. 40 above but 2,00,000 Litres capacity UG sump at Main pump house at RCI

All as per item No. 40 above but 2,25,000 Litres capacity UG sump at New CMCD pump house

All as per item No. 40 above but 3,00,000 Litres capacity UG sump at main pump house, RCI

All as per item No. 40 above but 4,60,000 Litres capacity UG sump at main pump house, RCI

All as per item No. 40 above but 18,00,000 Litres capacity UG sump at main pump house, RCI

Draining out the water from the Over Head Reservoir (OHR) 10,000 Litres capacity on 10metres staging at CMCD and CCTW without causing interruption in regular water supply, cleaning the walls, roof and floor of tank complete by scrapping thoroughly with wire brush and removing dirt/dust/scales/sludge etc., cleaning the tank thoroughly with water and bleaching powder, finally cleaning with chlorine solution for complete antibacterial disinfections including removing and disposing off the rubbish out of tank off as directed and writing date of cleaning on the tank on black ground/board with white synthetic enamel paint complete all as specified and directed.

All as per item No 48 above but 25,000 Litres capacity OHR on 16m staging at Carbon Carbon.

All as per item No 48 above but 40,000 Litres capacity OHR on 15m staging at CMCD

All as per item No 48 above but 50,000 Litres capacity OHR on 25m & 55M staging at near AVC building

All as per item No 48 above but 1,30,000 Litres capacity OHR on 54m staging at Carbon

All as per item No 48 above but 1,50,000 Litres capacity OHR on 40m staging at CMCD

All as per item No 48 above but 2,00,000 Litres capacity OHR on 31m staging at Technical area

Disconnecting electrical connection from the centrifugal pump motor main housing of 75HP capacity and taking out from the installed position, transporting for repairs/ servicing to an approved workshop and transporting back after carrying out repairs, servicing/overhauling, assembling, installing in its original position and connecting up all electrical connections, testing and commissioning complete all as specified and directed. Note: 1) Unit rate quoted shall be deemed to be include the cost of packing materials. 2) Spares replaced will be measured and paid for separately as Supply only.

All as per item No 55 above but 60HP Pumpset.

All as per item No 55 above but 40HP Pumpset.

All as per item No 55 above but 25HP Pumpset.

All as per item No 55 above but 15HP Pumpset.

All as per item No 55 above but 7.5HP Pumpset.

All as per item No 55 above but 5HP Pumpset.

Disconnecting water and mechanical connection from the impeller and casing of centrifugal pumpset of 75HP capacity and taking out from the installed position, transporting for repairs/servicing to an approved workshop and transporting back after carrying out repairs, servicing/ overhauling, assembling, installing in its original position and connecting up all mechanical and water connections, testing and commissioning complete all as specified and directed. Note: 1) Unit rate quoted shall be deemed to be include the cost of packing materials. 2) Spares replaced will be measured and paid for separately as Supply only.

All as per item No 62 above but 60HP Pumpset.

All as per item No 62 above but 40HP Pumpset.

All as per item No 62 above but 25HP Pumpset.

All as per item No 62 above but 15HP Pumpset.

All as per item No 62 above but 7.5HP Pumpset.

All as per item No 62 above but 5HP Pumpset.

Cutting and taking out the burnt out winding from the stator carefully, cleaning the stator from the deposits of burnt copper and carbon using necessary cleaning agent and applying slot insulation with Melinex paper and rewinding the stator with super enamelled copper wire of same gauge and same number of turns as that of existing carefully and tying the winding free from induction vibrations and bring the winding to operate on 415 volts three phase AC supply of 50 Hz, preheating in oven and applying the insulating varnish and post heating for attaining proper insulating strength for Pump motor of capacity 75HP complete all as specified and directed.

All as per item No 69 above but 60HP Pump motor.

All as per item No 69 above but 40HP Pumpset.

All as per item No 69 above but 25HP Pumpset.

All as per item No 69 above but 15HP Pump motor.

All as per item No 69 above but 7.5 HP Pump motor.

All as per item No 69 above but 5 HP Pump motor.

Supply only DE bearing of 75HP pump motor as that of existing make and model including applying bearing grease complete all as specified.

All as per item No 76 above but 60HP Pump.

All as per item No 76 above but 40HP Pumpset.

All as per item No 76 above but 25HP Pump.

All as per item No 76 above but 15HP Pump.

All as per item No 76 above but 7.5HP Pump.

All as per item No 76 above but 5HP Pump.

Supply only impellor of 75HP pump motor as that of existing make and model including applying grease complete all as specified.

All as per item No 83 above but 60HP Pump.

All as per item No 83 above but 40HP Pumpset.

All as per item No 83 above but 25HP Pump.

All as per item No 83 above but 15HP Pump.

All as per item No 83 above but 7.5HP Pump.

All as per item No 83 above but 5HP Pump.

Supply only pump shaft made of carbon steel for 75HP pumpset as that of existing make and model including applying grease complete all as specified.

All as per item No 90 above but 60HP Pump.

All as per item No 90 above but 40HP Pumpset.

All as per item No 90 above but 25HP Pump.

All as per item No 90 above but 15HP Pump.

All as per item No 90 above but 7.5HP Pump.

All as per item No 90 above but 5HP Pump.

Supply only bush for 75HP pumpset as that of existing make and model complete all as specified.

All as per item No 97 above but 60HP Pump.

All as per item No 97 above but 40HP Pumpset.

All as per item No 97 above but 25HP Pump.

All as per item No 97 above but 15HP Pump.

All as per item No 97 above but 7.5HP Pump.

All as per item No 97 above but 5HP Pump.

S&F in repairs, DOL Starter in sheet steel enclosure, max motor output at 415volts 3 phase of 5HP, complete all as specified and directed.

S&F in repairs, DOL Starter in sheet steel enclosure, max motor output at 415volts 3 phase of 7.5HP, complete all as specified and directed.

Supply only column pipe of GI tubing of 50mm bore heavy duty class 'C' including GI fittings for connecting from submersible pump to level to borewell ( Each pipe shall not be less than 3 mtr in length) and all as specified and directed. Make : JINDAL/TATA/PRAKASH

M&L, Construction of brick masonry valve chamber, 1000 x 1000 x 1000mm (Internal dimensions) with PCC foundation 1:4:8 type D2 using 40mm graded stone aggregate 150mm thick, 100mm wide offsets alround over 100mm thick hard core, brick masonry walls built in CM 1:6, 50mm thick coping and floor in PCC 1:2:4 type B-1 using 20mm graded stone aggregate, finished even and smooth, rendering 15mm thick in cement mortar 1:4, finished even and smooth without using extra cement internally and externally upto 150mm below GL including top of floor including excavation earthwork in any type of soil, 3mm thick mild steel sheet cover fixed on 40mmx40mmx6mm thick angle iron frame with hold fasts embedded in PCC coping with locking arrangement, mild steel handles and painting to steel surfaces with two coats of synthetic enamel paint over one coat of primer including disposal of surplus soil to a distance not exceeding 50m etc., complete all as specified and directed.

S&F in repairs, 500litres capacity triple layered rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position including connecting up of existing inlet and outlet pipes and ball valve complete all as specified and as directed.

S&F in repairs, 750litres capacity triple layered rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position including connecting up of existing inlet and outlet pipes and ball valve complete all as specified and as directed.

S&F in repairs, 1000litres capacity triple layered rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position including connecting up of existing inlet and outlet pipes and ball valve complete all as specified and as directed.

Opening the submersible pump and motor of any capacity for inspection/repairs and reassembling the same after carrying out repairs/replacement of worn out/ unserviceable spares with new ones, including cleaning exposed steel surfaces and applying one coat of approved spray painting and replacing packing bolts, mild steel clamps etc., with new ones and making the pump and motor fully functional including necessary machining work, testing and commissioning complete all as specified and as directed. NOTES: (a) Spares parts required will be measured and paid under relevant items of this BOQ as SUPPLY ONLY (b) Rewinding of motor, if required will be measured and paid separately as M&L.

Lowering the submersible pumpset removed under Sl item No. 2 above after carrying out repairs to the pumpset including connecting up of all electrical and water connections, testing complete all as specified and as directed.

Flushing of bore well to any depth with the compressed air continuously to remove complete loose soil, silt, sludge etc., till clear water is obtained to the entire satisfaction of Engineer-in-Charge complete all as specified and as directed.

Rewinding of submersible motor of 5 HP capacity with super enamelled copper winding wire of same gauge and same number of turns as that of existing including tying the winding and connecting the coils and bringing the connections as that of existing complete all as specified and as directed.

Rewinding of submersible motor of 7HP to 12.5 HP capacity with super enamelled copper winding wire of same gauge and same number of turns as that of existing including tying the winding and connecting the coils and bringing the connections as that of existing complete all as specified and as directed.

SUPPLY ONLY thrust bearing suitable for the submersible pump set of 7.5 HP capacity of 5 to 20 staging complete all as specified and as directed.

SUPPLY ONLY impeller PVC/FRP suitable for the submersible pump set of 5.0 HP capacity of 5 to 20 staging complete all as specified and as directed.

SUPPLY ONLY shaft suitable for the submersible pump set of 5.0 HP capacity of 5 to 20 staging complete all as specified and as directed.

Supply only Calicum Hypo Chlorite with 65-70% chlorine content( Calicum based ganular disinfectant for water treatment) complete all as specified. Make : PuriChlor

Excavation in trenches not exceeding 1.50m wide and not exceeding 1.50m depth for foundation, for laying of pipes/cables/poles etc., forming bottom surfaces to required slope/gradient where pipe are laid and getting out in any type of soil complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick each layer as in soil complete all as specified and as directed.

Removing excavated material/soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed.

S&F in repairs single phase preventor complete all as directed. Make : L&T/Minilax

Richcon Engineers

sanjar enterprises

shyam engineerings

BHAGYARAM ENTERPRISES

M/S GDR CONSTRUCTIONS

Bismi Engineering