Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.4 LAccepted-AOC | L1 | Accepted-AOC Lowest rate quoted | |
| 2 | L2₹39.0 L+₹32,817 (0.85%)Rejected-AOC | L2 | Rejected-AOC Higher rate quoted than L1 | |
| 3 | L3₹39.8 L+₹1.2 L (3.02%)Rejected-AOC | L3 | Rejected-AOC Higher rate quoted than L1 | |
| 4 | L4₹40.7 L+₹2.1 L (5.34%)Rejected-AOC MONIRAMPUR DASPARA P O BARRACKPORE | BARRACKPORE | NORTH 24 PARGANAS | WEST BENGAL | 743101 | L4 | Rejected-AOC Higher rate quoted than L1 | |
| 5 | L5₹40.9 L+₹2.2 L (5.79%)Rejected-AOC SOUTH CANEL PAR PO PANAGARH BAZAR DISTT PASCHIM BARDWAN WB PIN 713148 | PANAGARH BAZAR | PASCHIM BARDWAN | WEST BENGAL | 713148 | L5 | Rejected-AOC Higher rate quoted than L1 |
Tender Value
₹49.6 L
EMD Value
₹99,200
Closing Date
5 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE PANAGARH
GARRISON ENGINEER PANAGARH, MILITARY ENGINEER SERVICES, PO-PANAGARH, DIST-BURDWAN, WEST BENGAL, PIN-713420
All as per BOQ
2022_MES_557880_1
8400-868/E8
Open Tender
Civil Works
Works
210 days
PANAGARH
Class D and Category a (i) (Building)
6 documents required · 6 mandatory
₹500
GE PANAGARH
₹99,200
Yes
8 Dec 2022
15 Oct 2022
7 Nov 2022
15 Oct 2022
5 Nov 2022
29 Oct 2022
Amount
M&L for fly ash brick old size straight or curved on plan.exc 6 mtr mean radius built in CM (1:6) ,including demolition of brick work built in cement mortar including all quoins, arches, pillar etc and removing rubbish off from the premises complete all as specified and directed
Taking down cement plaster from brick walls or concrete surfaces including raking out joints, hacking out for key, scrubbing down with water and removing rubbish off from the premises complete all as specified and directed.
M&L for rendering 15 mm thick on other than fair faces of brick work or concrete surfaces, finished even and smooth (without using extra cement) on walls in cement mortar (1:6), complete all as specified and directed
M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces finished even and smooth on walls in cement mortar (1:4), complete all as specified and directed
Supply only liquid water proofing compound complete all as specified and directed. (Make : Pidilite Industries/ Impermo/Snowcem India Ltd/Sika)
M&L for preparation of new plastered surfaces and applying with three coat of white wash over wall surfaces complete all as specified and directed.
M&L for preparation of new surface and apply two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surface complete all as specified and directed (Make: M/s Apex Ultima of Asian/ Weather Coat all guard of Berger/Xtra Tough of Shalimar).
M&L for complete removal of existing treatment of wall & applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surface complete all as specified and directed (Make: M/s Apex Ultima of Asian/ Weather Coat all guard of Berger/Xtra Tough of Shalimar).
M&L for complete removal of old/existing treatment of wall surfaces of any description and applying two coats of white washing on wall surfaces complete all as specified and directed
Dismantling (corrugated, semi corrugated ) sheet in roof covering complete all as specified and directed.
S&F pre-painted galvalume aluminium zinc coating @ 150 GSM GI based corrugated steel sheet 0.5mm of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
S&F pre-painted galvalume aluminium zinc coating @ 150GSM GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed
S&F hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed
Taking down window chowkhats or frame n.exc 1.5 Sqm each with shutter(s) (without taking off shutters from the frame), including removing to store, complete all as specified and directed
Taking down chowkhats or frame exceeding 1.5 Sqm but n.exc 4 Sqm each with shutter(s) (without taking off shutters from the frame), including removing to store, complete all as specified and directed
S&F powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.
S&F powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, C.P. brass/ stainless steel screws all.complete as per architectural drawings and the directions of Engineer-in-Charge.
S&F 4mm thick figured sheet glass ordinary quality any size and in any type of frame and glazing with oil putty (or beading ) in square n.exc 0.5 Sqm in each panes complete all as specified and directed
S&F solid PVC Door Frame of size 50 mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specified and as directed.
S&F factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C' channel heaving a PVC sheert strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed.
S&F butt hinges, extruded alluminium, with mild steel hinge pin, bright polished and fixed, type 100 mm size B21 complete all as specified and directed.
S&F 150 mm long aluminium alloy handles, fabricated type, anodized complete all as specified and directed
S&F aluminium anodised 150 mm barrel tower bolts of extruded section complete all as specified and directed
S&F bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed
M&L for PCC (1:3:6) type C1 as in bed blocks for hold fast including necessary formwork complete all as specified and directed.
Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and removing serviceable tiles to store yard and rubbish off the premises complete all as specified and directed
M&L for cement concrete 75mm thick 1:4:8, Type D-2 (using 40 mm graded stone aggregates) as in sub base for flooring etc complete all as specified and directed.
M&L for cement concrete type B1 (1:2:4) (using 20mm graded stone aggregate) 50 mm thick as in floor finished even and smooth with using extra cement complete all as specified and directed.
M&L for non-skid joint free coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but n.exc 0.18 sqm in floors etc. set and including 15 mm thick cement mortar (1:4) screed, set and jointed with grey cement slurry & pointed with grout of matching shade complete all as specified and directed
M&L for glazed ceramic coloured tiles in vertical surfaces of size 350x250x7mm/450x350x7mm thick quality not less than group II, straight edge, as in skirting, dados, walls etc set and jointed in neat cement slurry and pointed in white cement with pigment to match the shade of tiles over and including 10mm thick rendering in cement mortar (1:4), complete all as specified and directed.
M& L for 75mm thick PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection finished even and smooth without using extra cement, incl making joints 10mm wide to the full depth of PCC at every 3 meters and at every change of direction and filling the same with and incl bitumen and sand (1:3) by weight complete all as specified and directed.
M&L for cement concrete 1:3:6, Type C-1 (using 20 mm graded stone aggregates) in surface channels and drains complete all as specified and directed
M&L for hardcore of broken stone of gauge n.exc 63mm, deposited, spread and levelled in layers n.exc 15 cm thick, watered and rammed to a true surface complete all as specified and directed
M&L for PCC (1:2:4) type B1 in lintels up to 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed
Dismantling wrought iron or mild steel work of any description not otherwise provided for in any position complete all as specified and directed.
M&L for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Fe-410-W (Gde- E-250) quality-B complete all as specified and directed.
M&L for two coats of synthetic enamel paint as on old steel & iron surfaces of any description, not otherwise described, over 10 cm in width or girth, including preparation of surfaces complete all as specified and directed
M&L for two coats of synthetic enamel paint over & including a coat of red oxide primer over new steel & iron surfaces of any description, not otherwise described, over 10 cm in width or girth, including preparation of surfaces complete all as specified and directed
M&L for 15mm dia GI tubing medium grade with all fittings to walls, ceiling or laid under floors including taking up or down steel tubing and connections 15 mm bore complete all as specified and directed
S&F in repair vitreous China Squatting pan ‘Orissa’ pattern, size 580 X 440mm, white, with integral foot rests and with ‘P’ or ‘S” trap, (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, etc and including provision of lime concrete bedding and make good the disturbed surface, complete all as specified and directed.
S&F vitreous china wash basin, white , flat back , size 550 x400mm (for hospital use) excluding taps, waste, chain and plug and porcelain stopper but including brackets any size, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and directed
S&F viterous China urinals, bowl type (flat back or corner wall type), of size 465 x 355 x 265mm white complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe)
S&F in repairs pillar taps 15 mm bore dia cast copper alloy with capstan heads, chromium plated, fancy type screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shank and fly nut screwed for iron pipes, fancy type complete all as specified and directed
S&F in repair stop valve 15 mm dia cast copper alloy high pressure with crutch or butter fly handle screwed for iron pipe or union and fixed. Chromium plated fancy type complete all as specified and directed
S&F PVC connection 15 mm dia, 600 mm long including check nut complete all as specified and directed
S&F as in repair grating square 150mm size of PTMT(minimum 100 gms) all as specified and directed.
S&F in repairs PVC valve less symphonic action type flushing cistern 10 ltr low level, white with inlet ball valve float and handle including bracket etc complete all as specified and directed
S&F in repair bib tap 15 mm dia cast copper chromium plated alloy with crutch or butter fly handle screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.
S&F flush pipe of polythene of low or high density 32 mm PVC for low level flushing cistern complete all as specified and directed
S&F Towel rail Tubular towel rail 20mm dia 60cm long brass chromium plated complete all as specified and directed.
S&F PTMT shelf any colour with brass chromium plated screws & PVC rawl plugs (Minimum weight 300 gm) complete all as specified and directed
S&F 75mm PVC (SWR) floor trap with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.
S&F PVC (SWR) 75mm bore pipes single socketed in any length with rubber ring joints laid in trenches complete all as specified and directed.
S&F PVC bends plain (any radius) for 75mm bore PVC pipes complete all as specified and directed.
Demolition of cement concrete as in ground floors and pavings n.exc 15 cm thick below or above ground level (unreinforced) and removing rubbish off from the premises complete all as specified and directed.
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc complete all as specified and directed.
M&L for sand filling under floors or in foundations including watering and consolidation and all as specified and directed.
M&L for non-skid ceramic coloured tiles 7mm to 8mm thick, (square or rectangular) area of each tile exc 0.18 Sqm but n.exc 0.38 sqm in floors etc, over & including 15 mm thick cement mortar (1:4) screed etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, including dismantling of floor hearth or wall tiling incl cement mortar bedding complete all as specified and directed
S&F anodised aluminium snap grid 605mm x 605mm Anodised aluminium snap grid frame work for false ceiling with all necessary aluminum angle & Tee arrangement with and incl fixing cleats screws etc including dismantling wall and ceiling boards (firbre, pulp, insulation etc) or insulation boards/slabs/blankets any thickness incl cover fillets complete all as specified and directed
S&F hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long complete all as specified and directed.
S&F 6mm thick 'E' board (non asbestos fibre) designer building boards fixed in aluminum frame work in ceiling flat or sloping with screws complete all as specified and directed
M&L for preparation of new surfaces applying two coats of oil bound distemper over a coat alkali resistant primer on new wall surface including applying 1.5mm thick wall care putty (minimum), on wall surfaces complete all as specified and directed (Make: M/s Tractor Acrylic Distemper of Asian/M/s Bison Acrylic Distemper of Berger, M/s No 1 Premium Acrylic Distemper of Shalimar).
M&L for complete removal of existing treatment of old wall of any description and applying two coats of oil bound distemper over a coat of alkali resistant primer on old surfaces of walls complete all as specified and directed. (Make: M/s Tractor Acrylic Distemper of Asian/M/s Bison Acrylic Distemper of Berger, M/s No 1 Premium Acrylic Distemper of Shalimar).
Demolition of reinforced cement concrete any thickness and removing rubbish off from the premises complete all as specified and directed.
M&L for RCC nominal mix type A-1 (1:1.5:3) (using 20mm graded stone aggregate) as in foundations, including rafts, footings, foundation beams, plinth beams; bases for columns, etc. basement slabs, under-reamed piles and mass concrete complete all as specified and directed
M&L for reinforced cement concrete, nominal Mix type A-1 (1:1.5:3), (using 20 mm graded stone aggregates) as in Beams, cantilevers, bressummers,lintels over 1.5m span complete all as specified and directed
M&L for form work to sides and soffits of floor roof beams, beam haunching, girders, bressummers lintels, cantilevers, shelves including supports, edges, over hangs, etc also splays between floors and beams, etc for flat rough finished surface complete all as specified and directed
Mild steel TMT bars 10 mm dia & over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed
All as per item No 69.00 mentioned here-in-above but 6mm to 8mm dia complete all as specified and directed
All as per item No 69.00 mentioned here-in-above but 5 mm to 10 mm dia, as in strips, spacers complete all as specified and directed
S&F 2nd class hard wood plain solid straight chowkhat and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joint complete all as specified and directed.
S&F framed work such as grills, grating etc. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, railings and similar work confirming to Fe-410-O or Fe-310-O, complete all as specified and directed
S&F factory made, 35 mm thick, panelled shutter second class hard wood, plain framed, hammer marked, (two panel ) with lock rail . The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated ,complete all as specified and directed
S&F 2nd class hard wood 35mm thick Glazed and skelton shutters, open rebated and prepared to receive glass, gauge etc(without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing gauge,etc sizes of member of shutter as specified SSR part-I Section 8 clause 8.24 (a) complete all as specified and directed
S&F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples .
S&F butt hinges, extruded alluminium,with mild steel hinge pin, bright polished and fixed, type 75 mm size C21 complete all as specified and directed.
S&F aluminium anodised 200 mm barrel tower bolts of extruded section complete all as specified and directed
S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.
M&L for preparation of new Wooden surfaces of any description , not otherwise described over 10 cm width or girth and applying 2 coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
S&F drapery rod (conduit) of dia not less than 25 mm having a corrugated virgin PVC extrusion on it & finials of approved shade with standard MS powder coated/ brackets, fixed to walls with rawl plugs and steel screws complete all as specified and directed
M&L for 25mm thick cement concrete type B0 (1:2:4) (using 12.5mm stone graded aggregate) as in sub floor complete all as specified and directed.
M&L for chequered cement concrete tiles with mixture of grey cement and pigments 30cm x30cm x 25mm thick, set jointed and pointed in neat cement slurry in floors over and including 15mm thick screed bed in cement mortar 1:6, with grey cement and pigment complete all as specified and directed.
M&L for PCC (1:2:4) type B1 as in kerbs incl necessary form work (cast in situ) etc complete all as specified and directed.
Excavating in trenches, n.exc 1.5 m wide and n.exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc 10 Sqm on plan and n.exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed
M&L for removing excavated soil n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 cm complete all as specified and directed.
M&L for PCC 1:4:8 type D2, (using 40mm graded stone aggregates) as in foundation, filling and mass concrete all as specified and directed.
M&L for brickwork with fly ash bricks, straight or curved on plan exc 6m built in cement mortar (1:6) complete all as specified and directed
M&L for steel work in tubular post/columns including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS-1161-1979 grade ST-240, complete all as specified and directed.
S&F plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed
Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed
Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n.exc 10cm long and dia 12mm complete all as specified and directed
Excavating in post holes (or similar holes) each n.exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25 cm in soft/loose soil complete all as specified and directed.
M&L for moorum filling in floors or pavements, laid in layers n.exc. 15cm thick, spread, levelled and rammed including watering complete all as specified and directed.
M&L for 200 mm thick Kankar or laterite, spread, rolled and consolidated to gradient and camber required complete all as specified and directed
M&L for 100mm thick PCC 1:4:8 type D2 (using 40mm graded crushed stone aggregate) as in sub base complete all as specified and directed
M&L for 100 mm thick PCC 1:2:4 type B2 (using 40mm graded crushed stone aggregate) as in hardstanding laid in panels with and including use and waste of formwork and to divide the area in panels and finishing the surface even and fair complete all as specified and directed
Forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’ when thickness of concrete slab is 100mm complete all as specified and directed.
M&L for excavating over areas, n.exc 1.5 m deep and getting out in soft/loose soil complete all as specified and directed.
S&F in repair 25 mm bore gate valve cast copper alloy screwed down high pressure with clutch handle screwed both ends for Iron pipe complete all as specified and directed
S&F in repair 25 mm bore GI Tubing medium grade in Trenches/ Floor/Pillar and connection including fitting like socket /Union/Tee/Reducer Nipple etc complete all as per specified and directed.
S&F in repair 50 mm bore GI Tubing medium grade in Trenches/ Floor/Pillar and connection including fitting like socket /Union/Tee/Reducer Nipple etc complete all as per specified and directed.
E/M PORTIONS Taking down carefully aluminium conductor point wiring (light,fan,socket or power) complete including fittings such as switches, ceiling roses, pendants, regulators ,sockets etc. and removing (except those to be reused shall be kept in safe custody at the site ) and making good disturbed surfaces of walls, floors etc.to match with the existing complete all as specified and directed
M&L for point wiring for light point/ fan point, one light/fan/exhaust fan point controlled by one, one way switch using 1.5 sqmm nominal cross sectional area multistranded copper conductor ,PVC insulated unsheathed FRLS cables in and including 20 mm dia or higher size PVC concealed conduits and fittings of medium grade, including pressed steel terminal switch boxes, 3 mm thick bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers or modular cover plate with frame of suitable size and 1.5 sqmm nominal cross sectional area multistranded copper conductor FRLS PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed. (Note: Quoted rate deemed to be included for necessary chasing/cutting and making good the surface)
All as per item No 105.00 mentioned here-in-above but One 3 pin 5 Amps socket out let points on independent board complete all as specified and directed
All as per item No 105.00 mentioned here-in-above but 5 Amp socket on same board with other switches complete all as specified and directed.
M&L for wiring for socket out let on independent Boards controlled by one, one way switch using 4.0 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FR cables in and including 20 mm dia or higher size PVC concealed conduits and fittings, including Modular pressed steel terminal switch boxes of different module and 4.0 sqmm nominal cross sectional area multistranded copper conductor , PVC insulated unsheathed FR cable earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed (Note: Quoted rate deemed to be included for necessary chasing/cutting and making good the surface)
S&F switch piano flush type, single pole , 5/6 Amps, one way complete all as specified and directed
S&F switch socket combination 2 in 1 multipurpose 5 pin , (6 Amps ) flush type controlled by one switch complete all as specified and directed
S&F socket outlets 2 in 1, 3 pin, 5/6 Amps flush type230/240 V complete all as specified and as directed .( For Same Board only)
S&F switch socket combination 5 in 1 , 6 pin , (5/16 Amps ) flush type controlled by one switch complete all as specified and directed
S&F ceiling rose surface bakelite 65 mm x 50 mm two to three terminal suitable for 230 Volts AC 6 Amps complete all as specified and directed
S&F stepped type electronic fan regulator flush type 240 Volts ISI marked complete all as specified .
S&F lamp holder, PVC/polycarbonate type with back plate straight or angular suitable for batten fittings including S&F LED bulb 12 watt complete all as specified and directed
S&F security light fittings 25 watts, minimumm lumen output 100 lumen/Watt, made up of pressure dia cast housing with prismatic polycarbonate diffuser and individual LED with secondary optic and IP65 including necessary connection complete suitable for pole dia 25mm complete with all accessories including connected with twin core twisted flexible copper conductor of suitable size complete all as specified and directed.
S&F in repair 18 W LED light fitting wall mounted batten 4'ft , extruded polycarbonate, environmental friendly, heat sink provided for efficient heat dissipation and integrated electronic driver for 18 watt,6000K including necessary connection complete all as specified and directed.
S&F in repairs epoxy powder coated sheet metal enclosure for DBs, double door, Single pole and neutral 240 V, 8 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact complete all as specified and directed.
S&F in repairs MCB SP, 6 to 32 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs including necessary connection complete all as specified and directed. (Note : Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating)
S&F in repairs MCB SPN 6-32 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necessary connection complete all as specified and directed. (Note : Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating)
M&L for earthing complete with galvanised mild steel earth plate electrode 600x600x6.0mm thick, burried directly in ground to a depth not less than 2.25 metres deep below ground level with top edge of earth plate not less than 1.5 metre below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, using GI wire 4 mm dia as earth wire electrode bolted or riveted to earth plate at one end and connected to equipments at another end, GI earth wire encased in and including 15 mm dia GI 'light grade' pipe from upper end of earth plate upto equipments,20 dia bore GI pipe 'light grade' as water pipe from earth chamber to upper edge of earth plate, Test point , GI funnel with wire mesh fixed on water pipe and PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1, duly reinforced with MS round bars 6mm dia @ 100 c/c both ways with 10mm dia MS round bar as in lifting handles, excavation, earth work including laying the GI pipe concealed in floor/wall all as described in electric plate of SSR Part I complete all as specified and directed and testing on completion complete all as specified and directed. (Note :- (i) If the desired earth resistance is not found, earthing shall be redone by the contractor at no extra cost to the department. (ii) Testing to be carried out by the contractor in presence of Engr- in- Charge , entered in the earth testing register, prepared and to be maintained by the contractor & submited to Concerned JE E/M. (iii) T&P and testing instrument(Meger) to be provided by the contractor at own cost).
Taking down of AC ceiling fan of any sweep & any height and opening the fan and oiling, greasing and replacement of unserviceable accessories and servicing, complete overhauling and re-assembling and testing complete for efficient functioning and hanging it back in position including provn of 0.5 Sqmm copper flexible twin twisted cable (length n.exc 0.5 metre) from ceiling rose to fan as directed by the Engr-in-Charge. (Note : Accessories such as gun metal bush and split pin and jam nut shall be measured and paid under relevant here-in-after).
M&L for painting of ceiling fans upto 1400mm sweep carefully, dismantling fan blades and paint with one coat of synthetic enamel paint including filling cavities with filler after cleaning all dust etc complete all as specified and directed.
Supply, laying / fixing / connecting, testing and commissioning of 10 Sqmm x 2.0 core LT under ground cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric cable (heavy duty) with multistranded aluminium conductor,1100 Volts grade in trenches/on wall/poles laid in ducts/inside protection pipe of the cross sectional area including cable glands, lugs and suitable size of MS saddle clips (where ever cable laid in ceilings / walls without cable duct) including taking down old one of any type/size all as directed by the Engr-in-Charge. (Note: Excavation, sand cushioning, brick will be measured and paid separately).
M&L for river sand, washed and screened dry for cushioning to under ground cable in trenches below and around under ground cable including spreading and levelling complete as specified and directed . (Note : Punned thickness 18 cm shall only be considered for payment)
Supply and lay in trenches fly ash bricks, for cable protection all as specified and directed by the Engr-in-Charge.
S&F in repair pipes galvanized, 50 mm bore “light grade”, supplied and laid complete including necessary fittings such as tees, bends, elbows, sockets, reducers etc as per site requirement or specified.
Jaibalaji Enterprise
HIGH HILLS INFRA
M/S MODERN CONSTRUCTION
Hooghly Construction Co.
ROY ENTERPRISE
BABY ENGINEERING ELECTRICAL MECHANICAL STORES
M/s S A TRADING
KAZI SAHABUL ALAM
UNITED BUILDERS
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .