mahasainik stage repairing

Amount

ESTIMATE FOR PROPOSED REPAIRING OF STAGE AT MAHASAINIK HALL/LAWN, GHORPADI, PUNE

Exavation for foundation in earth,soil of all types, sand gravel and soft murum, including removing the excavated material upto a distance of 50 m. beyond the building area and stacking spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc complete (Lift upto 1.5 m) By mechanical means (DSR 2021-22 P No 115, 21.02)

Providing soling using 80mm size trap metal in 10 cm layer including filling voids with crushed sand/grit, ramming, watering etc complete(DSR 2021-22 P No 118, 21.40)

Providing and laying cast in situ/ready mix cement concrete in 10 cm layer in M-10 of trap/granite/quartzite/gneiss metal for foundation and bedding including bailing out water, formwork , laying/pumping compacting, roughening them if special finish is to be provided, finishing if required and curing complete(DSR 2021-22 P No 131, 24.01)

Providing and fixing factory made Hydraulically pressed Mechanically vibrated and compacted pre cast inter locking cement concrete paving blocks 60mm thick including cost of all materials, Manufacturing, curing transporatation of blocks to work site including loading , unloading and stacking as directed, laying paving blocks in position over prepared bed of natural sand/ crushed sand of 50mm thickness including necessary excavation in all strata’s spreading blindge of fine sand over the prepared bed, compacting blocks by plate vibrator etc complete. (DSR 2021-22 P No 37, 5.20)

Providing and laying cast in situ/ready mix cement concrete M-20 of trap/granite/quartzite/gneiss metal for RCC columnsand beams as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete (Excluding reincorcement and structural steel) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (DSR 2021-22 P No 134, 25.31)

Providing and fixing in position TMT FE 500 bar reinforcement of various diameters for RCC pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjaj, lintels pardis, copings, fins arches etc, as per detailed designs, drawings and schedules, including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete(DSR 2021-22 P No 139, 26.33)

Provikding second class Burnt Brick masonry with conventional /IS type brcks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete B) First Floor(DSR 2021-22 P No 144, 27.05)

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 Kilogamper cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc. complete (DSR 2021-22 P No 151, 32.11)

Providing and laying cast in situ/ready Mix cement concrete in 10cm layer in M-20 of trap/granite/quartzite/gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping compacting, roughening them if special finish is to be provided, finishing if required and curing complete for stage floor(DSR 2021-22 P No 133, 25.11)

Filling available excavated earth as well as (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeing 20cm in depth consolidating each deposited layer by ramming and watering(DSR 2021-22 P No 117, 21.37)