Minor civil repair and plumbing work at Ground Floor of Ladies Toilet at Main Telephone Exchange Building, Chhindwara MP 2nd call

Amount

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : (a)1:2:4 (1 cement : 2 coarse sand(zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :(a) 1:3:6 (1 Cement : 3 coarse sand(zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources).

Providing and fixing ISI marked, IS : 1341, M.S. heavy weight butt hinges with necessary screws etc. complete :(a) 100x75x3.50 mm

Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : (a)300x16 mm

Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete :(a)300x10 mm

Providing and fixing aluminium handles ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : (a)125 mm

Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding, and joints filled with acid and/or alkali resisting cement as perish : 4457, complete as per the direction of Engineer-in- Charge. (a) In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand).(i)Acid and alkali resistant tile.

(b) In dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand). (i)Acid and alkali resistant tile.

Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. (a)Two or more coats on new work.

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :(a)Water thinnable cement primer.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : (a)Two or more coats on new work.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground , all complete as per directions of Engineer-In-Charge. (a)With cement mortar 1:4 (1 cement : 4 fine sand).

Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge.

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. (a)Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. (a)For thickness of tiles 10 mm to 25 mm

Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge :(a)15 mm to 40 mm nominal bore

Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metre lead as per direction of Engineer-in-charge: (a)Up to 150 mm diameter

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead:(a)Of area beyond 3 sq. metres

Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: (a)White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.(a)Semi rigid pipe (i)32 mm dia

Providing and fixing soil, waste and vent pipes : (a)100 mm dia. (i)Sand cast iron S&S pipe as per IS: 1729.

Providing and filling the joints with spun yarn, cement slurry and cement mortar 1:2 ( 1 cement : 2 fine sand) in S.C.I./ C.I. Pipes : (a)100 mm dia pipe

Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and includingcement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc. : (a)For 100 mm dia. Pipe

Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.(a)100 mm dia (i)Sand cast iron S&S as per IS - 1729

Cutting chases in brick masonry walls for following diameter sand cast iron/centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 ( 1 cement : 3 coarse sand :6graded stone aggregate 12.5 mm nominal size), including necessary plaster and pointing in cement mortar 1:4 (1 cement : 4 coarse sand) : (a)100 mm dia.

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. : Internal work – Exposed on wall. (a)15 mm dia. nominal bore

(b)20 mm dia. nominal bore

(c)25 mm dia. nominal bore

Providing and fixing uplasticised PVC connection pipe with brass unions : (a)30 cm length (i)15 mm nominal bore

Providing and fixing PTMT bib cock of approved quality and colour. (a)15mm nominal bore, 86 mm long. Weighing not less than 88 gms.

Providing and fixing PTMT stop cock of approved quality and colour. (i)15 mm nominal bore, 86 mm long. Weighing not less than 88 gms.

Providing and fixing PTMT pillar cock of approved quality and colour . (a)15mm nominal bore, 107 mm long. Weighing not less than 110 gms.

Dismantling bib cock or stop cock

Cleaning wash basin/ sink with acid.

Dismantling pillar cock of wash basin.

Removing chokage of H.C.I. or S.W. pipe with split bamboo.(a) Underground

(b) Over ground

Dismantling & Refixing pit cover

Cleaning silt of inspection pit.

Easing door and windows.

Cleaning I.P.W.C. with acid.

Removing chokage of water closet.

Cleaning glazed tiles with acid.

Removing chokage in G.I. pipe including cleaning pipe.(i)15mm

(iii)25mm

Credit value of unserviceable materials :(a)G.I. Pipe(i)15 mm dia

(iii)25mm

(b)Stop Cock/ Bib Cock- 15 mm dia

(c)C.P Pillar cock- 15 mm dia

(d)All type of scraped steel/iron item e.g. reinfocement bar, structural members,doo bolts,tower bolt,handle etc