Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹23.0 LAccepted-AOC FLAT NO A 15 ARCHANA GREEN SOCIETY NIBM ROAD KONDHWA PUNE 411048 | PUNE | MAHARASHTRA | 411048 | L1 | Accepted-AOC Lowest | |
| 2 | L2₹25.5 L+₹1.9 L (7.93%)Rejected-Finance N A | NA | NA | 121004 | L2 | Rejected-Finance Not Lowest | |
| 3 | L3₹25.8 L+₹2.2 L (9.35%)Rejected-Finance N A | NA | NA | 121004 | L3 | Rejected-Finance Not Lowest | |
| 4 | L4₹26.1 L+₹2.5 L (10.6%)Rejected-Finance N A | NA | NA | 121004 | L4 | Rejected-Finance Not Lowest | |
| 5 | L5₹26.3 L+₹2.7 L (11.3%)Rejected-Finance MOURYA HEIGHTS SATAVNAGAR HANDEWADI ROAD HADAPSAR PUNE 28 | PUNE | MAHARASHTRA | 411028 | L5 | Rejected-Finance Not Lowest |
Tender Value
₹39.6 L
EMD Value
₹79,300
Closing Date
17 Feb 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NORTH PUNE
Garrison Engineer North General Cariappa Marg Camp Pune 411001
GE (N) P/TOKEN- 91 OF 2023-2024SPL REPAIRS TO BLOCK NO 9 (QTR NO 01 TO 08) AT KOHIMA LINES AND PROVISION OF GRILL AT RS MARG IN THE AREA OF AGE B/R(CENTRAL) UNDER GE(N) PUNE
2024_MES_638680_1
GE (N) P/TOKEN- 91 OF 2023-2024
Open Tender
Civil Works
Item Rate
240 days
GE NORTH PUNE
Refer tender documents.
8 documents required · 8 mandatory
₹500
GE NORTH PUNE
₹79,300
Yes
30 Mar 2024
23 Jan 2024
24 Feb 2024
23 Jan 2024
17 Feb 2024
5 Feb 2024
24 Jan 2024 - 29 Jan 2024
Amount
Dismantling asbestos cement (plain, corrugated, semi corrugated etc.) sheets in roof coverings complete all as specified and as directed.
Dismantling of wall/ceiling board of any description and any thickness including cover fillets etc complete all as specified and as directed.
Dismantling structural steel work including doors, gates, framed truss etc. complete all as specified and as directed.
M&L for PCC (1:2:4), type B1 (using 20mm graded stone aggregates) as in roof kerbs or mud stops rounded or chamfered on edges Coping etc including Demolition of Existing PCC complete all as specified and directed.
Supply and fix 0.50mm thick pre-painted galvalume aluminium zinc coating (AZ-150) GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws complete all as specified and as directed.
Supply and fix 0.50mm thick pre-painted galvalume aluminium zinc coating (AZ-150) GI based plain steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws complete all as specified and as directed.
Material and labour for 8 to 10mm thick PVC prelaminated Gypsum board false ceiling board on and including GI powder coated grid work of size 600 mm x 600 mm with using 32.0 mm x 20 mm x 1.5 mm thick main tee, 23.5 mm x 23.5 mm x 1.28 mm cross tee and 25 mm x 25 mm x 1.5 mm angle fixed to wall for false ceiling including necessary supporting hanger with 3.0 mm dia GI wire and 'J' bolts washer nuts for securing frame work to ceiling, suspended @ 120 cm C/C both ways, size of grid shall be 605 mm x 605 mm complete all as specified and as directed. Make :- Armstrong, Diaken, New Age, Gyprock as approved by GE.
S&F mild steel rolled section as in main cross beams purlins, rafters and running rails fixed independently with angle iron cleats or connecting pieces conforming to Gde Fe-410-W, Gde E-250, quality A complete all as specified and directed.
M&L for preparation of new steel surfaces of any description over 10cm girth or width and applying two coats of synthetic enamel paint over a coat of red oxide primer.
Taking down cement plaster on brick/ stone walling including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.
Material and labour for coloured glazed ceramic tiles of size 450mm x 300mm x 7mm thick as in dado/ skirting of colour and pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in coloured cement to match the colour of tiles over and including 10mm thick backing coat in cement mortar (1:3) complete all as specified and as directed.
Material and labour for Hilighter coloured glazed ceramic tiles of size 450mm x 300mm x 7mm thick as in dado/ skirting of colour and pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in coloured cement to match the colour of tiles over and including 10mm thick backing coat in cement mortar (1:3) complete all as specified and as directed.
M&L for mild steel framed work such as grill, grating, gate etc with ends of bars shouldered or rebated or forged into spike framed guard bars barred iron doors, ladders, framed baluster, walk way, railing; frame work, including pintle hinges, stops, hand-made sliding bolts etc,sliding channels for sliding of gate and similar work conforming to Fe 290 Gde-E-165 complete all as specified & as directed.
S&F GI dash fastener 8 to 10mm dia and 100 to 125mm long with GI Washer of suitable dia and thickness and nut including drilling hole in masonry/ concrete wall by means of electrical driven drill machine complete all as specified and as directed.
Supply and fix for polycarbonate fibre glass reinforced translucent corrugated/ Plain sheeting 6.00 mm thick hollow section fixed with coach screw/bolts and washer in roof, wall etc including dismantling of existing complete all as specified and as directed.
Dismantling of stone masonry in cement mortar, in any position all as directed.
M&L for stone walling of Random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and as directed.
All as per Srl item No. 17 above but except stones
Material and labour for keyed pointing to random or polygonal rubble uncoursed stone masonary walls in cement mortar 1:3 including raking out joints complete all as specified and as directed.
Taking Down Old RCC Lovered Jalli/ Jaffery without harming the exisiting wall of Stone/ Block or Bricks masonry and Refixing the same complete all as specified and directed.
Demolition of brickwork/ block masonry built in cement mortar and rubbish off the premises complete all as specified and directed.
M&L for Pre-cast cement concrete block masonry with solid blocks type C1, exc. 10 cm in width and setting in cement mortar 1:6, complete all as specified and directed
Material and labour for rendering 10mm thick in cement mortar (1:6) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement all as specified and as directed.
Material and labour for rendering 15mm thick in cement mortar (1:4) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.
M&L for preparation of newly plastered surfaces and applying two coats of weather proof exterior emulsion paint ('APEX' brand of Asian or equivalent brand of Berger/Shalimar) over one coat of primer to wall complete all as specified and as directed by Engineer-in-charge.
M&L for preparation of old decorated surfaces of Walls, Parapets etc and applying Two coat of 100% Acrylic exterior emulsion paint over a coat of primer complete all as specified and as directed.
Material and labour for preparation of New plastered wall surface and applying two coats of acrylic distemper oil emulsion over a coat of alakli resistant primer over a thin layer of wall care cementeous putty complete all as specified and as directed.
Supply and fix in repairs for stainless steel sink made of Salem Stainless Steel grade AISI 304 (18/8), 1mm thick,Glossy finish, with drainage board made of 1mm thick sheet, with plug, washers and waste coupling, waste pipe, including bedding in cement mortar to dwarf wall or cast iron cantilever brackets and connecting union to pipe, over all size 915 mm x 460 mm with bowl size 405mm X 355mm X 178mm all as specified and directed. Make :-Blue Star Silver Shine Cat No.SSSB-52 or equivalent from Nirali/Jain Brothers Sanitation Pvt Ltd (Jayna )as approved by GE. Note :- If Cat No. is revised, equivalent cat No. from latest catlauge shall be considered.
Supply and fix in repair for 15 mm bore bib cock chromium plated, fancy type with flange, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule all as per Cat No. 7306 of make Prayag or equivalent complete all as specified and as directed.
Taking up or down 15mm dia steel tubing and connections, including cleaning for re-fixing or removal all as directed.
Taking up or down 20mm dia steel tubing and connections, including cleaning for re-fixing or removal all as directed.
M&L for GI tubing 15mm dia medium grade with all fittings & fixed complete to walls & ceiling or laid in floors in repairs complete all as specified and as directed.
M&L for GI tubing 20mm dia medium grade with all fittings & fixtures complete laid in trenches fixed in repairs complete all as specified and as as diirected.
Supply and fix in repairs for brackets for drapery/ curtain rod, decorative type, stainless steel as per sample kept in GE (N) Pune office complete all as specified and as directed.
Supply and fix in repairs for drapery/ curtain rod of 25mm dia, decorative type, stainless steel complete all as specified and as directed.
Dismantling of stone slabs,cudappah, of any description or thickness in floor/fixed to walls, apron etc laid bedded and pointed in cement mortar complete all as specified.
Material and labour for machine cut cudappah stone slab 20-25 mm thick as in lintels, shelves, vertical supports, fixed with neat cement slurry or arldite, including rubbing and polishing complete all as specified and as directed
M&L for Machine cut kota stone 20-25mm thick over cement screed bed 20mm thick in CM (1:4) laid and jointed with grey cement slurry and pointed with grey cement and pigment to match the shade of the slab including rubbing and polishing complete (mirror polish) as in flooring/steps /slabs complete all as specified and as directed.
Material and labour for 20mm thick granite (of any type) work ( table rubbed and polished) in steps , jambs. pillars, window cills, cooking platforms and like in cement mortar (1:4), pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.
Labour only for full round moulding to 18 to 20mm thick granite slab complete all as specified and as directed.
Supply and fix in repairs aluminium powder coated louvered ventilator with provision of exhaust fan using ‘Jindal” aluminium section or equivalent make as specified including glass 3mm thick ordinary quality, frosted and stainless steel wire mesh 0.36mm dia wire and 1.40mm aperture etc complete all as specified and directed. Section - 63 x 25mm, No- 14001
M&L for complete removal of existing treatment on walls using steel wire brush, sanding machine, rubbing emery papers etc and washing , rubbing down and stopping of distempered and painted surfaces, preparing surfaces plastered or unplastered surfaces ready to receive new finish complete all as specified and directed.
M&L for preparation of old painted steel surfaces of any description over 10cm girth or width and applying one coat of synthetic enamel paint.
M&L for applying wall care putty 1 to 1.5 mm thick on walls surfaces.
M&L for applying one coat of alkali resistant priming paint on wall.
M&L for two coats of acrylic distemper oil emulsion of approved tint on wall surfaces
M&L for preparation of old treated surfaces of wood and wood based material of any description over 10cm width or girth and applying one coat of synthetic enamel paint.
Labour & Equipments for the mirror polish for existing Kota Stone/ Green Marble/ Granite all as per specified and as directed.
Dismantling fencing wire mesh of any type complete all as directed.
Dismantling barbed wire of any description complete all as directed.
Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground.
M&L for PCC 1:3:6, type C-1 (using 20mm graded stone aggregate) as in bed blocks, stops rounded or chamfered on edges complete all as directed.
M&L for Pre-cast cement concrete block masonry using solid blocks of PCC 1:3:6, type C-1, exc 10cm in width and setting in CM 1:6 complete all as speified and directed.
M&L for 15mm thick plastering in CM 1:4 on brick or concrete wall surfaces etc finished even and fair all as specified and directed.
M&L for two coats of Cement Base paint over a coat of primer on newly plastered wall surfaces including prepration of wall surface all as specified and directed.
M&L for preparation of previously treated plastered surface of wall and applying a coat of cement base paint all as specified and directed.
S&F Cast iron grills/gratings of size and shape as approved by GE including welding to steel frames, posts etc complete all as specified and directed.
M&L for two coats of Gold coloured anti rust synthetic enamel paint Rust shield Asian Paints (Apcolite) or equivallent over a coat of red oxide primer on new steel surfaces including preparation of surfaces all as specified and directed.
M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 volts grade, ISI-694 marked drawn through in and including heavy duty, PVC casing caping including all accessories etc, heavy duty ISI marked, with GI sunken /surface boxes 1.2 mm thick, 60 mm deep with earth dolly duly as per site requirment , covered with modular white cover plate with frame suitable for modular switches, or PVC surface mounted modular box, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth with copper lugs and connecting to earth dolly complete all as specified and directed for the following :-
(a) One light point controlled by one, one way switch 5 Amps
(b) One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator
(c) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad.
(d) One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board.
All as per item No. 4 above but with multistranded copper conductor 2.5 Sq mm (nominal area), single core, PVC insulated and unsheathed multistranded FRLSH cable 1100 Volt grade ISI-694 marked for 3 pin, 15 Amp socket outlet, independent, including PVC insulated multistranded copper conductor 2.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth with copper lugs complete and connecting to earth dolly.
Supply and fixing Modular Switch - 6 Amps, Single pole one way, one module complete all as specified and as directed.
Supply and fixing Modular Switch - 16 Amps, Single pole one way, one module complete all as specified and as directed.
S & F Modular socket outlet multipurpose 6 Amps, 5 pin, 2 module, complete all as specified and as directed.
S & F Modular socket outlet multipurpose 16 Amps, 6 pin-shuttered type, 2 module, complete all as specified and as directed.
Supply and fixing modular fan step regulator, 120W - 2 module suitable for ( 48" & 56" fans) supply complete all as specified and as directed.
S & F Ceiling rose, 3 phase / PVC / polycarbonate, complete all as specified and as directed
Supply and fixing 20/22 Watt Inverter LED Battenaluminium body with Opal Diffuser, IP20, Battery back-up & Functioning as per Product TDS with intregrated electronic driver, connector block, holder, decorative end caps, LED tube light etc complete with all accessories prewired and mounting PVC rectangular block, including provision of flexible copper conductor cable of suitable size from ceiling rose to connector and taking down old unserviceable fitting from existing postion for carrying to store, making good disturbed surfaces complete all as specified and as directed. Make Halonix Cat No LED INVERTER BATTEN HLB-08-22-CW-INV or equivalent in Havells, LHEXACP7FNIW020
S & F for recess mounted 2' x 2' square LED panel 36 watts, 596 x 596 x 9mm size, sleek design aluminium housing, polycarbibate diffuser white powder coated finish operating voltage 140 volts - 270 volts, AC, 50 Hz complete all as specified and as directed. Make- Halonix HLFPR22-11-36-CW-37mm, Philips RC383B LED 4000 PSU ODWH PIR, Jaquar LULTU1S036XC.
Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp connecting up with three core flexible copper conductor cable of suitable size from ceiling rose to connector, making good disturbed surfaces complete all as specified and as directed. Make Jaquar cat No -LGLZ01X010XW , Orient Cat No- LBLN-10-C-SQ
Taking down fan, Sealing cable end, dismantling blades and removing fan and blades from site and fixing or Hanging in existing position after proper cleaning , replacing unserviceable fan condenser 2.5 MFD and connecting up including provision of cable from ceiling rose or connector to fan after room plaster, colour complete all as specified and as directed.
Supply and fixing ceiling fans working on single phase input voltage 140-285 , Sweep- 1200 mm, Power 32 W, 345 RPM , with 232 Air delivery CMM (m3 /min), complete with compact BLDC Motor, blades, down rods, electronic regulator and accessories, including making connections with provision of flexible wire 23 /0.0076 twin core copper conductor from ceiling rose/connector to fan complete all as specified & as directed.
S & F for plastic body exhaust fan, AC single phase, 240 V of size 250 mm sweep with louvers (as per Cat Part No -698502 of Make Indo Asian or equivalent Make- Bajaj Maxima DX/ Usha Crispair )including necessary connection and replacement of flexible copper cable from ceiling rose and taking down of old unserviceable fan complete all as specified and as directed
Taking down carefully existing unserviceable main switch /cutout /DBs of any type, capacity and description and removing materials from site and making good disturbed surfaces of walls, floors as per the existing finishes all as specified and as directed.
S & F sheet metal enclosure MCB DB SPN 8 way with 100 Amps rated bus bar 240 Volts double door with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonary etc and making good of disturbed surface to match the existing colour of wall complete all as specified and as directed
S & F for sheet metal enclosure MCB DB SPN 4 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed. Make - Schneider/Legrand/L&T/ABB.
S & F Vertical TPN Distribution Board in sheet metal enclosure double door 4 Way, 415 volts, 50 Hz, suitable for Flush Mounting and surface Mounting & provision for FP MCCB as incomer up to 125 Amps as I/C ( Frame1) and SP/TP MCB's as outgoing (Modules Optium F1+12) , With -100 Amps Copper insulated Busbar assembly for each phase, isolated Neutral bar, 2 Earthbar and Cable ties for cable management, IP 43 - #IK 09 with metal door including necessary cement work and electrical connections complete all as specified and as directed.
Supplied and fixed Four pole MCCB, Thermal Release Range 63-100 Amps, rupturing Breaking Capacity Icu at 415V AC 50Hz. 30 (kA) complete all as specified and as directed
Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) SP 5 To 32 AMP and current carrying capacity in the MCB DB complete with connection testing and commissioning
Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) SPN 32 AMP and current carrying capacity in the MCB DB complete with connection testing and commissioning
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.
Taking down of old unserviceable sub main wiring of any type complete all as specified and as directed.
M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLSH cable with multistranded copper conductor of size 4.0 Sq mm nominal area and drawn through PVC non metallic rigid PVC casing caping as per site requirement and its accessories including one run of PVC insulated 4.0 Sq mm (nominal area) multistranded copper conductor FRLSH cable as earth wire and connected from DB to DB/ main board complete all as specified and as directed.
Note : 1. Performance security:- Refer Condition 22 of Special Conditions. 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site.
J P ASSOCIATES
M/S - R K CONSTRUCTIONS
durga consrtruction
Gauri Associates
GS Associates
N B ENTERPRISES
VIRENDRA FABRICATORS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .