General fund 2023-24 Vettaikaranpudur town panchayat

Amount

Earth work excavation for foundation and depositing on bank with in the initial lead of 10m and a lift of 2m in hard stiff clay, stiff block cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders etc. complete. complying with std. specifications.SS 20 B For 1st depth of 0 m to 2 m

Supply and delivery of DI pipes as per IS Specification including loading, unloading, freight stacking, conveyance to the work site etc., complete 200MM DI K7 Pipe

CI SLUICE VALVES NON RAISING SPINDLE TYPES TO PRESSURE RATING OF 1.6 PN TO BE USED IN PUMP HOUSES (LONG BODY/ LONG FACE TO FACE) Conforming to IS AND WITH 5 YEARS WARRANTY Sluice valve ( 200 mm dia. )

Supply and delivery of Cast Iron double Air valve including specials as per IS 14845/2000 PN 1.0 with ISI marking and with 5 years warranty suitable for use in water supply main including, loading, freight, unloading insurance all taxes and stocking at site. including cost of Specials and all the incidental charges etc., complete and as directed by Departmental officers. Air valve ( 200 mm dia. )

Lowering the following pipes and specials to trench and laying to proper grade and alignment as per standard specifications 200MM DI K7 Pipe

Supply and delivery of DI D/F Gate sluice valves (soft seated) resilient seated soft sealing Gate Valves (Sluice Valves) with body Bonnet of Ductile cast iron ofGrade GGG 40 or equivalent grade, Wedge fully rubber lined with EPDM replaceable spindle nut without gland packing and with 3 O Ring protection on the shaft and seals of NBR and the valves should be of Vacuum tight and100% leak proof with face to face dimensions as per BS 5163-89/ISI 4846-2000/DIN 3202 F4. All the valves should be with electrostatic powder coating both inside and out side with pocket less straight through body passage. All the valves are to be compatible for buried application with pressure rating PN 10/16 and DUCTILE IRON SPECIALS AS PER IS 9523/2000 including unloading ,transporation and stacking charges (Vide Annexures ) DI 100 mm D/F Gate valve in D Mains : Supply and Delivery and fixing of DI D/F Gate Valve including DI Specials and labour charges transpotation charges etc., completed. 200MM dia

Refilling with excavated soil ( other than sand) complying with the standard specification in layers of 15 cm watered well rammed and consolidated after the pipes and specials are laid, jointed and tested etc., and removing and depositing the surplus earth complete as directed by the Engineer - in - charge pipe line

Supply of submersible pumpset suitable for Openwell with ISI mark IS 8034 without Panel board with 2000 LPM x 100mts Head including cost and conveyance of all other labour and material charges to site etc., complete complying with standard specifications.

Supply of 20 H.P 3 Phase ISI Panel board - Star Delta with Two level Guard and Auto Start, the Panel board should be provided as per spcification given in Board circular No: 23/DCE/QATA/2004 Dt.23.08.2004 including cost and conveyance of all labour charges.

Supply of PVC insulated and sheathed 3 core 6 Square mm flat type copper cable conforming to IS 694/1990 including cost and conveyance of all other labour and material charges to site etc., complete complying with standard specifications.

Towards labour charges for the erection of submersible pumpset in borewell/Openwell including fixing and jointing submersible cable withproper clamps upto the starter to required dpth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, voltmeter, Ammeter, three pilot (incating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pimpset and trial run for 10 days.

T.SIVANANTHAN