New installation and commissioning of 800 mm width x 130 meter long 22KW Viswa make belt conveyor at 11R and 12L to 11R and 17 of (RVIIIB1) Jambad Bottom Seam at Shyamsundarpur Colliery under Bankola Area.

Amount

Item Description/ Heading

New fabrication of Drive frame and base frame

New fabrication of Tail-End set

New fabrication of 2 No Load Table (hopper)

Re fabrication of structure for Discharge unit at UG site including Gas, Oxygen, Welding Rod etc at 11R/12L at Jambad Bottom Seam

Carrying, Transportation and installation with fitting at 11R/12L to 11R/17L (130 Mtrs long Belt Conveyor) i) Fitting of Discharge head (unit) and 10 Nos MS joist (girder) and decking plate chute with scrapper etc. 2.50 MT 18.65 MT ii) Fitting of Drive unit with Gear and Motor (22KW)= 4.50 MT iii) Fitting of pressure Drum= 0.50 MT iv) Fitting of Tail-End 01. Set 1.0 MT v) Fitting of 02 No Load Table (hopper)= 2.00 MT vi) Starter and Switchgears= 1.00 MT vii) Fitting of 130 Mtr conveyor structure (125 mm runner) with Top & Bottom Rollers 130 x 55KG/Mtr=7.15 MT

260 Mtr PVC Belt (800mm width) of transportation & lapping with joint tensioning trial run etc.

Foundation of down hoiding boits of drive unit, discharge base frame & Taii-End

Carrying & laying of electrical cables from (including carrying & layout of pull cord lighting cable and light fitting)

Cleaning of debris before installation of the belt

Drive & Tail-End fencing complete fabrication and fitting

Concrete work for foundation of drive base frame (1:1:5:3)

Dismantling of 3 Pillars (75 mtrs) belt conveyor structure (runner, top bracket & foot stool with top & bottom rollers)

Cleaning of discharge drive side for dismantling purpose

150 Mtrs PVC belt opening

Dismantling of discharge unit

Providing of nut Bolt for conveyor structure fitting , 1. 130 Mtr x 1.25 KG = 162.50 Kg, Drive unit= 25 Kg, Discharge unit=20KG, Hopper & Tail end = 40KG

Oxygen

Welding rod

Total impact of GST for the purpose of CTC

SABIR CONSTRUCTION

SINHA ENTERPRISES