Providing FHTC to LO house Hold under NSJ under JJM retrofitting to various GWSS under GP Badhal and Barthata Tehsil Jubbal Distt Shimla HP

Amount

Pumping Machinery for Stage 1st. Providing horizontal spindle,horizontal/redial split casing/and suction(Back-full out arrangements single/double/multi stage centrifugal pump or combination of pumps. In series/parallel of recommended make such as Mather and Platt/KSB/Beacon Weir/Kirlosker/BE/Jyoti as per BIS 1520-1980 with upto date ammend-ments read with IS:9137-1978 or latest edition suitable for lifting water for under mentioned characterestics with bronze,impellers/priming funnels,casing ring and shaft sleeves of bronze,shaft of steel grade 4508 FN8 with cast iron casing coupled directly through a flexible coupling on a common MS/Cast steel base plate (base plate to be from the manufacturer of the pumping unit only) to slip ring/ squirrel cage screen protected drip proof induction motor/motors of standard make such as Kirlosker/BHEL/Crompton/NGEF/GEC/Siemens/Jyoti and suitable for operation on 400(+/-)10% volts, 50 cycles /second.3 phase AC electric supply. The power of electric motor/motors should be at +10% in excess of the maximum power required by the pump/pumps in the operation range of (+) 10% and (-)15% of the duty poiint head. The motor/motors as per ISI:325:1978 with upto date ammendments read with IS 900:1972. It should include cost of bearing nuts bolts and painting etc. and should meet the following requirements. (Duty Conditions as per Annexure A)

Providing double flanged CI sluice valve PN1 of Leader/BHEL/Kirlosker/GLEd/Kilburn Fourses / Kartar make and equal to dia of suction pipe and cpable of withstanding the normal seat pressure as per IS:780:1984 with upto date ammendments. Sluice Valve Make Class Seat Pressure.

Providng double flanged cast steel sluice valves ASA 300 of leader/BHEL Kirlosker/Kilburn GLED/fourses/ Kartar make and one step higher then delivery line of pump and capable of withstanding the normal seat pressure and as per BIS standards with upto date ammdnements. Sluice Valve Make Class Seat Pressure Material.

Providing double flanged cast iron reflux valves class PN-I of Leader/BHEL/KILROSKER/Kartar/KILBURN/GLED/FOURSES/ Kartar make and of required dia having delivery side for rising main and capable of withstanding normal seat pressure as per BIS standards with upto date ammendments. Reflux Valve Make Class Seat Pressure Material

Providing double flanged cast iron reflux valves class PN-I of Leader/BHEL/KILROSKER/Kartar/KILBURN/GLED/FOURSES/ Kartar make and of 100mm dia having rising main for rising main and capable of withstanding normal seat pressure as per BIS standards with upto date ammendments. Reflux Valve Make Class Seat Pressure Material

Providing 100mm dia circular dial analog pressure gauge of suitable range of Fiebig /Bourden/ PREGA/precision make complete with all accessories such as stop cock, copper tubing etc.as per IS: 3624-1987 with upto date ammendments. Pressure Gauge Make Range.

Providing discharge meter of standard make to be fixed on the rising main in pump house as per the directions of the Engineer in charge as per Is:2373:1981 with upto date ammendments. Discharge Meter Make Type Range

Installation of all the items apparing at serial No.1 to 9 as per the systematic drawing.

Providing and fixing double flanged MS/GI piping work (Layout to be approved by the Engineer in charge) for suction and delivery pipes suitable to pump(s) offered and common header as per the R/Main respectively complete with all specials such as bends, tees, reducers. Increasers with companions flanges matching with the relevant specifications of the accessories including rubber/asbestos gasket of minimum 3mm thckness as per IS:2712:1979 and required number of nuts and bolts as per Is:1364:1983, The Pipes fittings and joints shall be as per relevant IS code & to withstand 1.5 times total head stipulated under item No.1. The size of the various components to be as under: i) Suction pipe : One dia higher then the suction of pump offered and suitable to keep the velocity of flow from 1 to 1.5M/second in the suction pipe. ii) Delivery pipe: One dia higher then the delivery of the pump offered and suitable to keep the velocity of flow from 1.5 to 2M/second in the delivery pipe. iii) Common header : One dia higher then delivery of pump x 350 mm dia and will extend upto 5 meters from the outer wall of the pump house in the direction to be jointed. Suction Pipe Material Grade Thickness Pressure rating. Delivery oioe and common header Material Grade Thickness Pressure rating.

Providing and laying copper PVC insulated arsoured power cable(One cable carrying all the three phases) of suitable size and capacity to motors and all other electircal equipments as per IS:1554(P-I) 1988 or latest ith upto date ammendments of siemens GLOSTER /IEC /ICC /EICD/NATIONAL/GRANDLAY make including all other accessories such as thinbles, flexible pipes,solders,nuts and bolts cable glands etc. laid in pipes or trenches under floor. Arsoured Power Cable A. Motor Side (from switch to starter and starter to motor) Size Make Type Capacity Core B. Supply Side (from meter to HPSEB to bus bar and switch) Size Make Type Capacity Core

Pumping Machinery for Stage 2nd. Providing horizontal spindle,horizontal/redial split casing/and suction(Back-full out arrangements single/double/multi stage centrifugal pump or combination of pumps. In series/parallel of recommended make such as Mather and Platt/KSB/Beacon Weir/Kirlosker/BE/Jyoti as per BIS 1520-1980 with upto date ammend-ments read with IS:9137-1978 or latest edition suitable for lifting water for under mentioned characterestics with bronze,impellers/priming funnels,casing ring and shaft sleeves of bronze,shaft of steel grade 4508 FN8 with cast iron casing coupled directly through a flexible coupling on a common MS/Cast steel base plate (base plate to be from the manufacturer of the pumping unit only) to slip ring/ squirrel cage screen protected drip proof induction motor/motors of standard make such as Kirlosker/BHEL/Crompton/NGEF/GEC/Siemens/Jyoti and suitable for operation on 400(+/-)10% volts,50 cycles /second.3 phase AC electric supply. The power of electric motor/motors should be at +10% in excess of the maximum power required by the pump/pumps in the operation range of (+) 10% and (-)15% of the duty poiint head. The motor/motors as per ISI:325:1978 with upto date ammendments read with IS 900:1972. It should include cost of bearing nuts bolts and painting etc. and should meet the following requirements. (Duty Conditions as per Annexure B)

Providing double flanged CI sluice valve PN1 of Leader/BHEL/Kirlosker/GLEd/Kilburn Fourses / Kartar make and equal to dia of suction pipe and cpable of withstanding the normal seat pressure as per IS:780:1984 with upto date ammendments. Sluice Valve Make Class Seat Pressure.

Providng double flanged cast steel sluice valves ASA 300 of leader/BHEL Kirlosker/Kilburn GLED/fourses/ Kartar make and one step higher then delivery line of pump and capable of withstanding the normal seat pressure and as per BIS standards with upto date ammdnements. Sluice Valve Make Class Seat Pressure Material.

Providing double flanged cast iron reflux valves class PN-I of Leader/BHEL/KILROSKER/Kartar/KILBURN/GLED/FOURSES/ Kartar make and of required dia having delivery side for rising main and capable of withstanding normal seat pressure as per BIS standards with upto date ammendments. Reflux Valve Make Class Seat Pressure Material

Providing double flanged cast iron reflux valves class PN-I of Leader/BHEL/KILROSKER/Kartar/KILBURN/GLED/FOURSES/ Kartar make and of 100mm dia having rising main for rising main and capable of withstanding normal seat pressure as per BIS standards with upto date ammendments. Reflux Valve Make Class Seat Pressure Material

Providing 100mm dia circular dial analog pressure gauge of suitable range of Fiebig /Bourden/ PREGA/precision make complete with all accessories such as stop cock, copper tubing etc.as per IS: 3624-1987 with upto date ammendments. Pressure Gauge Make Range.

Providing discharge meter of standard make to be fixed on the rising main in pump house as per the directions of the Engineer in charge as per Is:2373:1981 with upto date ammendments. Discharge Meter Make Type Range

Installation of all the items apparing at serial No.1 to 9 as per the systematic drawing.

Providing and fixing double flanged MS/GI piping work (Layout to be approved by the Engineer in charge) for suction and delivery pipes suitable to pump(s) offered and common header as per the R/Main respectively complete with all specials such as bends, tees, reducers. Increasers with companions flanges matching with the relevant specifications of the accessories including rubber/asbestos gasket of minimum 3mm thckness as per IS:2712:1979 and required number of nuts and bolts as per Is:1364:1983, The Pipes fittings and joints shall be as per relevant IS code & to withstand 1.5 times total head stipulated under item No.1. The size of the various components to be as under: i) Suction pipe : One dia higher then the suction of pump offered and suitable to keep the velocity of flow from 1 to 1.5M/second in the suction pipe. ii) Delivery pipe: One dia higher then the delivery of the pump offered and suitable to keep the velocity of flow from 1.5 to 2M/second in the delivery pipe. iii) Common header : One dia higher then delivery of pump x 350 mm dia and will extend upto 5 meters from the outer wall of the pump house in the direction to be jointed. Suction Pipe Material Grade Thickness Pressure rating. Delivery oioe and common header Material Grade Thickness Pressure rating.

Providing and laying copper PVC insulated arsoured power cable(One cable carrying all the three phases) of suitable size and capacity to motors and all other electircal equipments as per IS:1554(P-I) 1988 or latest ith upto date ammendments of siemens GLOSTER /IEC /ICC /EICD/NATIONAL/GRANDLAY make including all other accessories such as thinbles, flexible pipes,solders,nuts and bolts cable glands etc. laid in pipes or trenches under floor. Arsoured Power Cable A. Motor Side (from switch to starter and starter to motor) Size Make Type Capacity Core B. Supply Side (from meter to HPSEB to bus bar and switch) Size Make Type Capacity Core

Automation for stage 1st. Automation system for unmanned operation with SCADA features, PLC, HMI and Level sensor.

PLC (Programmable logic controller) with appropriate digital and analog inputs and outputs to give automatic command to star delta starter oanel/ Energy saving variable frequency sterter panel make aarmation electric/ Bechoff automation/ Rockwell automation.

Electric relay card 8 Channel.

SMPS 4.5 Amps to energise PLC system.

HMI [Human Machine Interface] 7" display for monitoring and controlling pumps make: Armation electric/ bechoff automation/ rockwell.

Control MCB for automation system.

Level Sensor to indicate the water level of tank remotaly.

Shielded data cable for communication of level sensor with PLC.

Supply of mobile app (Android/ IOS) with user ID and password to monitor and control the pumping operation from mobile for 3 users. Make: Aarmation electric/ bechoff Automation/ Rockwell automation.

Cloud gateway for data clouding to server.

SCADA software to be installed in laptop/PC to remotely monitor and control the operation of pumps and also to analyses the pump start and stop history logging, fault status, fault history, power quality parameters like PF, Current, Voltage, KWH, THD etc. make Aarmation electric/ Rockwell automation/ Backoff.

Cloud space for data storage at cloud/ server.

Installation, commissioning and software development.

Automation for stage 1st. Automation system for unmanned operation with SCADA features, PLC, HMI and Level sensor.

PLC (Programmable logic controller) with appropriate digital and analog inputs and outputs to give automatic command to star delta starter oanel/ Energy saving variable frequency sterter panel make aarmation electric/ Bechoff automation/ Rockwell automation.

Electric relay card 8 Channel.

SMPS 4.5 Amps to energise PLC system.

HMI [Human Machine Interface] 7" display for monitoring and controlling pumps make: Armation electric/ bechoff automation/ rockwell.

Control MCB for automation system.

Level Sensor to indicate the water level of tank remotaly.

Shielded data cable for communication of level sensor with PLC.

Supply of mobile app (Android/ IOS) with user ID and password to monitor and control the pumping operation from mobile for 3 users. Make: Aarmation electric/ bechoff Automation/ Rockwell automation.

Cloud gateway for data clouding to server.

SCADA software to be installed in laptop/PC to remotely monitor and control the operation of pumps and also to analyses the pump start and stop history logging, fault status, fault history, power quality parameters like PF, Current, Voltage, KWH, THD etc. make Aarmation electric/ Rockwell automation/ Backoff.

Cloud space for data storage at cloud/ server.

Installation, commissioning and software development.

Thakur Traders

VIRENDER THAKUR CONTRACTOR

HYDRAULIC ENGINEERING COMPANY

sadeep kumar