PROVN OF DRAINAGE, FALSE CEILING, COVER SHED, VEH PARKING SHED AND SPL REP TO SECURITY FENCE, 12 X ROLLING SHUTER AT FOD UNDER AGE B/R-I OF GE BENGDUBI MIL STN

Amount

SCHEDULE 'A' PART-I (B/R WORKS)

Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified and directed.

S&F 1.25 mm thick steel rolling shutters, without ball bearing, as specified including top cover, anchoring rod hasp and staple and one shop coat of primer erected in position as indicated, complete with gear operated type with bevel gear box and crank handle all as specified and as directed.

M&L Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed.

M&L ball bearing for rolling shutters complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of red oxide, zinc chrome complete all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion in natural ground and making good disturbed ground complete all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion in concrete and making good disturbed ground complete all as specified and directed.

Dismantling old barbed wire fencing fixed with ms wire all as specified and directed.

Surface excavation n exc 15cm deep all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out in soft/loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and directed.

Excavation in trenches not exceeding 1.50 mtr wide and not exceeding 1.5 mtr deep for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc and getting out in soft/loose soil complete all as specified.

Removing excavated material (soil) to a distance exc 50m and depositing where directed at a level n. exc. 1.5 m above the starting point complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 cm thick in soft / loose soil complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundation filling & mass concrete complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in foundation filling & mass concrete complete all as specified and directed.

S&F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed.

M&L for posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc.,and similar work conforming to Fe-290 Gde E-165 complete as specified and directed.

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm long but n exc 10cm long, 11 to 15 mm dia of shank complete all as specified and directed.

Supply only mild steel round bars in available lengths conforming to FE 410 W (Gde E-250) quality-A all as specified and as directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire all as specified and as directed.

Supply only chain link MS galvanised fencing 100x100mm mesh (10 gauge) all as specified and as directed.

M&L for PCC 1:2:4 type B-2 (using 40mm graded crushed stone aggregate) as in foundation filling & mass concrete complete all as specified and directed.

M&L for hardcore of gauge not exc. 63mm, deposited, spread and levelling in layers not exc. 15 cm thick, watered and rammed to true surface with broken stone or boulder complete all as specified and directed.

M&L 75 mm thick PCC 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in sub base of flooring complete all as specified and directed.

M&L for Virified ceramic tiles 7 to 8 mm thick ( square / rectangular polished, area of each tiles exc 0.18Sqm but n.exc 38 Sqm, in floor etc. set and jointed and incl 20mm thick screed bed in CM(1:6) set jointed in neat cement slurry and pointed with colour cement to match the tiles complete complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4 Type B-0 (using 12.5mm graded stone aggregates) cement concrete as in flooring, finished surface even and smooth with out using extra cement complete all as specified and directed.

M&L for 40mm thick PCC 1:2:4 Type B-1 (using 20mm graded stone aggregates) cement concrete as in flooring, finished surface even and smooth with out using extra cement complete all as specified and directed.

S&F MS Square tubes (square hollow sections) medium grade as in truss, purlin, rafters, post etc fixed with and including angle cleat, MS plate etc including necessary welding, fittings etc conforming to I. S.1161 1979 grade St.-240 complete all as specified and directed.

S&F Pre-painted coloured trapezoidal profiled galvalume/Zincalume sheet thickness of 0.50 mm TCT confirming to IS-513 (AZ-150 GSM, Al Zn alloy mettalic coating with 550MPA yield stress as per AS-1397) as in roof covering/cladding to wall fixed with self tapping screws(12-14 x 55 with EPDM seals), colour /exterior coat of silicon modified polyster/BHP x RW paint system 20 micron top coat applied over 5 micron primer and 5 micron polyster back coat applied over 5 micron primer complete all as specified and directed.

M&L for Fly ash brick work with old size bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for Fly ash brick work with old size bricks, straight or curved on plan to any radius half brick thick built in In cement mortar 1:4 complete all as specified and directed.

M&L for Rendering 15 mm thick on other than fair faces of brick work or concrete surface in cement mortar (1:4) surface finished even & smooth without using extra cement complete all as specified and directed.

M&L for preparation of new surface of wall and three coat of white wash complete all as specified and directed.

M&L Forming construction (Dummy) joint 75mm deep x10mm wide filling with sealing compound type Grade 'A' all as specified and directed.

S&F S & F PVC False consisting of 600 X 600, 5mm(+-0.25) thick Plain embossed PVC sheet of 600kg/cbm Density manufactured by an ISO-9001-2008 certified Company, used as panel insert in a frame work made using anodised aluminium T-section of size 1"x1" (25x25mm, 19 gauge or 1mm thick) in square pattern of grid sizes 2'X2'(600X600). The aluminium frame work is supported from the ceiling with the help of J hook and G.I wire/6mm M.S rods of required sizes to maintain proper level etc. The aluminium framework is supported on side wall with the use of aluminum L-section size 1"x1" (25x25mm) angles etc. complete all as per specified and directed.

M&L for PCC 1:3:6 type C-2 using 20mm graded crushed stone aggregate as in surface channels and drains including formwork complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate in lintel upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs, fixing of hold fast and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete all as specified.

(Note : The Scope of Work contained in 'Sch of Credit' amounting to Rs. 1,60,720.00 (refer Tender Srl Page No 23). The Quoted sum shall be arrived at after deducting the amount of “Sch of Credit” from the total amount of the ‘BoQ’

M/S BOSE CONSTRUCTION

M/S UTTAM ENTERPRISES

Paritosh Saha

M/S JANATA CONSTRUCTION

M/S G D CONSTRUCTION