SPECIAL REPAIR/ REPLACEMENT OF WOODEN CUPBOARD IN BEDROOMS AND KITCHEN OF JUNIOR COMMISSIONED OFFICERS AND OTHER RANK MARRIED ACCN AT J-1 LOC UNDER GE (EAST) JALANDHAR CANTT

Amount

Supply and fixing solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed.

Supply and fixing factory made PVC cupboards shutter laminated flush type of 30mm thickness consisting of panel of hollow PVC profile of 19mm thickness consisting of MS frame made out of MS tubes of 19 gauge thickness and size of 19mm x 19mm inserted all around the hollow profile section and insert one 19mm x 19mm MS tube in the centre of this section and lipped with 10mm (5mm x 2) thick and 19mm wide on stiles and rails using solvent cement. The inner panel shall be laminated with 5mm thick termite proof, water proof and fire retardant laminated PVC sheet using solvent cement on both the side of the panel. The front side of the panel visible in the front of the shutter to be edge bonded using 20mm wide x 1mm thick PVC leeping on both the edges etc. complete all as specified and directed, manufacturers specification and drawings

Supply and fixing factory made PVC cupboards shelves shutter flush type of 30mm thickness consisting of panel of hollow PVC profile of 19mm thickness consisting of MS frame made out of MS tubes of 19 gauge thickness and size of 19mm x 19mm inserted all around the hollow profile section and insert one 19mm x 19mm MS tube in the centre of this section and lipped with 10mm (5mm x 2) thick and 19mm wide on stiles and rails using solvent cement. The inner panel shall be laminated with 5mm thick termite proof, water proof and fire retardant laminated PVC sheet using solvent cement on both the side of the panel. The front side of the panel visible in the front of the shutter to be edge bonded using 20mm wide x 1mm thick PVC leeping on both the edges etc. complete all as specified and directed, manufacturers specification and drawings

Supply and fixing 100mm size butt hinges extruded aluminium alloy with mild steel hinge pin anodized and fixed complete all as specified and directed.

Supply and fixing 100mm aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.

Supply and fixing 150mm aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.

Supply and fixing aluminium handle cast type anodised 100mm long complete all as specified and directed.

Supply and fixing aluminium handle cast type anodised 150mm long complete all as specified and directed.

Supply and fixing aluminium stainless steel handle cast type 100mm long complete all as specified and directed.

Supply and fixing stainless steel soft close hydraulic clip on concealed hinges for full overlay (0 degree crank) for kitchen cupboard, complete all as specified and directed.

Supply and fixing stainless steel magnetic catcher of any colour of size 48mm x 14mm x 14mm berrum ferrite magnet of size 25mm x 10mm x 6mm, abs vergin plastic, fitted with 02 Nos screw of 13mm x 4mm csk head with zinc plated, complete all as specified and directed.

Taking down cement plaster on brick wall of any description thickness including racking out joints hacking for key, scrubbing down with water and prepared to receive plaster complete all as specified and directed.

Material and labour for 15mm thick cement plaster on brick or concrete surfaces in cement mortar (1:6) mixed with integral water proofing compound in the proportion recommended by manufacturer, surfaces finished fair and even complete all as specified and directed. (WPC shall be measured and paid separately under appropriate item of this BOQ).

Material and labour for preparation of new plastered or un-plastered surface of wall and applying two coats of oil emulsion distemper over a coat of primer complete all as specified and directed.

Taking down chowkhats or frame with shutter (without taking off shutter from the frame) area n. exc. 1.5 Sqm each for doors and windows complete all as specified and directed.

Taking down chowkhats or frame with shutter (without taking off shutter from the frame) area exc. 1.5 Sqm but n. exc. 4 sqm each for doors and windows complete all as specified and directed.

Dismantling boarding, any description, fixed in any position all as specified and directed