REPAIR AND MAINTENANCE OF DI CI GI PIPE LINE AND CONNECTED ITEMS UNDER GE SAUGOR

Amount

Excavation in trenches in hard/dense soil not exc 1.5m wide & not exc 1.5 deep and getting out for laying of pipe complete all as specified and directed..

Removing excavated material in exc 50 m and depositing where directed of a level n exc 1.5m above the starting point complete all as specified and directed..

Returning filling trenches with excavated earth including spreading leveling watering and well ramming in layer not exc 25 cm thick complete all as specified and directed.. as specified

Taking up or down of old GI tubing and connections of 15mm dia bore pipe complete all as specified and directed

All as per Srl item No.4 above but 20mm dia bore

All as per Srl item No.4 above but 25mm dia bore

All as per Srl item No.4 above but 40mm dia bore

All as per Srl item No.4 above but 50mm dia bore

All as per Srl item No.4 above but 80mm dia bore

Re-fixing/relaying/rerouting only of GI tubing of 15mm bore after cleaning in same location or other location new or old position, in trenches, in walls, ceiling and floor & testing complete all as directed by Engr-in Charge. Note- (i) GI pipe shall be used obtained from Srl item No.4 (ii). GI fittings shall be measured under relevant items (iii). If required, excavation and earth work shall be measured and paid separately

Re-fixing/relaying/Rerouting only of GI tubing of 20mm bore after cleaning in same location or other location new or old position, in trenches, in walls, ceiling and floor & testing complete all as directed by Engr-in Charge Note- (i) GI Pipe shall be used obtained from Srl item No.5 (ii). GI fittings shall be measured under relevant items (iii). If required, excavation and earth work shall be measured and paid separately

Re-fixing/relaying/Rerouting only of GI tubing of 25mm bore after cleaning in same location or other location new or old position, in trenches, in walls, ceiling and floor & testing complete all as directed by Engr-in Charge Note- (i) GI Pipe shall be used obtained from Srl item No.6 (ii). GI fittings shall be measured under relevant items (iii). If required, excavation and earth work shall be measured and paid separately

Re-fixing/relaying/Rerouting only of GI tubing of 40mm bore after cleaning in same location or other location new or old position, in trenches, in walls, ceiling and floor & testing complete all as directed by Engr-in Charge Note- (i) GI Pipe shall be used obtained from Srl item No.7 (ii). GI fittings shall be measured under relevant items (iii). If required, excavation and earth work shall be measured and paid separately

Re-fixing/relaying/Rerouting only of GI tubing of 50mm bore after cleaning in same location or other location new or old position, in trenches, in walls, ceiling and floor & testing complete all as directed by Engr-in Charge Note- (i) GI Pipe shall be used obtained from Srl item No.8 (ii). GI fittings shall be measured under relevant items (iii). If required, excavation and earth work shall be measured and paid separately

Re-fixing/relaying/Rerouting only of GI tubing of 80mm bore after cleaning in same location or other location new or old position, in trenches, in walls, ceiling and floor & testing complete all as directed by Engr-in Charge Note- (i) GI Pipe shall be used obtained from Srl item No.9 (ii). GI fittings shall be measured under relevant items (iii). If required, excavation and earth work shall be measured and paid separately

Supply and laying GI tubing of 15mm bore, medium grade galvanised with all fittings specials such as bend, elbows,tees, short pieces connection, back nuts, diminishig pieces, caps, plugs and unions etc laid in trenches complete all as specified and directed. Note: Excavation and earth work shall be measured and paid seperately

All as per Srl item No.16 above but 20mm bore

All as per Srl item No.16 above but 25mm bore

All as per Srl item No.16 above but 40mm bore

All as per Srl item No.16 above but 50mm bore

All as per Srl item No.16 above but 80mm bore

Supply and laying GI tubing of 15mm bore, medium grade galvanised with all fittings such as bend, elbows,tees, short pieces connection, back nuts, diminishig pieces, caps, plugs and unions etc laid in Walls, ceiling & laid in floor complete all as specified and directed.. Note : The quoted rate shall be deemed to be included for provn suitable clamp with wooden plug alongwith screws in intervals

All as per Srl item No.22 above but 20mm bore

All as per Srl item No.22 above but 25mm bore

All as per Srl item No.22 above but 40mm bore

All as per Srl item No.22 above but 50mm bore

All as per Srl item No.22 above but 80mm bore

Taking down the existing unserviceable Gate valve and supply and fix new gun metal globe valve with iron wheel 15mm dia , screwed both ends for iron pipes approved complete as specified and directed

All as per Srl item No.28 above but 20mm dia

All as per Srl item No.28 above but 25mm dia

All as per Srl item No.28 above but 40mm dia

All as per Srl item No.28 above but 50mm dia

Opening the top of the sluice valve of 80mm dia carefully, taking out the gate & spindle, scraping/cleaning the gate both sides, cleaning/scraping of sluice valve body throughly from inside, refixing / replacing the spindle, gate cheak nut and top of sluice valve including replacement of gland packing rope of suitable size & rubber gasket and Bolt,nut with washers necessary metalling ,grinding and levelling of the valve door seating complete all as specified and directed. Note:-Replacement of check nut/ spindle etc shall be measured and paid separately under relevant items

All as per Srl item No.33 above but 100mm dia

All as per Srl item No.33 above but 150mm dia.

All as per Srl item No.33 above but 200mm dia

All as per Srl item No.33 above but 250mm dia

All as per Srl item No.33 above but 300mm dia

Supply only stainless steel spindle 80mm dia suitable CI sluice valve complete all as specified and directed

All as per Srl item No.39 above but 100mm dia

All as per Srl item No.39 above but 150mm dia.

All as per Srl item No.39 above but 200mm dia

All as per Srl item No.39 above but 250mm dia

All as per Srl item No.39 above but 300mm dia

Supply only sluice valve check nut Gun metal as per sample (Square/rectangle) of 80mm dia complete all as specified and directed

All as per Srl item No.45 above but 100mm dia

All as per Srl item No.45 above but 150mm dia.

All as per Srl item No.45 above but 200mm dia

All as per Srl item No.45 above but 250mm dia

All as per Srl item No.45 above but 300mm dia

M&L for the spigot and socketed CI pipe 80mm bore run lead joint complete for repairs to leakage/repairs by using JCB/Poklane arrange sufficient manpower to arrest leakage/brakedown continue shift wise complete all as specified and directed. (Note : Earth Wrok/PCC & CI/DI Specials shall be measured and paid separately under respective items.

All as per Srl item No.51 above but 100mm bore

All as per Srl item No.51 above but 150mm bore

All as per Srl item No.51 above but 200mm bore

All as per Srl item No.51 above but 250mm bore

All as per Srl item No.51 above but 300mm bore

All as per Srl item No.51 above but 350mm bore

All as per Srl item No.51 above but 400mm bore

All as per Srl item No.51 above but 450mm bore

S&F Cast iron bends (any radius and angle) tappers any type (Straight, bend, increasing, decreasing or double socket) Tee, pieces single branch, “ Y” junction, double branch, cross ( all socket or socket spigot) collars, caps, caps & plugs upto the 150mm dia complete all as specified and directed

S&F Cast iron bends (any radius and angle) tappers any type (Straight, bend, increasing, decreasing or double socket) Tee, pieces single branch, “ Y” junction, double branch, cross ( all socket or socket spigot) collars, caps, caps & plugs of the size of 200 to 300mm dia complete all as specified and directed

M&L for run lead joint for spigot and socket pipes and fittings of 80mm bore including taking out the unserviceable lead joints & spun yarn complete all as specified and directed

All as per Srl item No.62 above but 100mm bore

All as per Srl item No.62 above but 150mm bore

All as per Srl item No.62 above but 200mm bore

All as per Srl item No.62 above but 250mm bore

All as per Srl item No.62 above but 300mm bore

All as per Srl item No.62 above but 350mm bore

All as per Srl item No.62 above but 400mm bore

All as per Srl item No.62 above but 450mm bore

M&L for rewinding of burn motor SP, 220 V, 120W, 960 RPM including dismantling the motor, removing burnt copper winding wire from slots carefully, cleaning the slots, winding the same as per the existing gauge of copper wire, lubricating the bearing, re-assembling and commisioning complete all as specified and directed.

Taking up cast iron/Ductile iron water mains ( including all fittings) with spigot and socket ends/ Tyton joints and lead joints for 80mm bore including burning out joints and recovering lead complete all as specified and directed

All as per Srl item No.72 above but 100mm bore

All as per Srl item No.72 above but 150mm bore

All as per Srl item No.72 above but 200mm bore

All as per Srl item No.72 above but 250mm bore

All as per Srl item No.72 above but 300mm bore

All as per Srl item No.72 above but 350mm bore

All as per Srl item No.72 above but 400mm bore

All as per Srl item No.72 above but 450mm bore

Relaying/re routing only cast iron mains ( including all fittings) with spigot and socket ends , tyton joint and lead joints of 80mm bore omplete all as specified and directed

All as per Srl item No.81 above but 100mm bore

All as per Srl item No.81 above but 150mm bore

All as per Srl item No.81 above but 200mm bore

All as per Srl item No.81 above but 250mm bore

All as per Srl item No.81 above but 300mm bore

All as per Srl item No.81 above but 350mm bore

All as per Srl item No.81 above but 400mm bore

All as per Srl item No.81 above but 450mm bore

Supplying and laying CI pipe with spigot ends centrifugally cast class LA size of 80 mm dia complete all as specified and directed. Make: LANCO/ELECTRO STEEL/TISCO/TATA with ISI Marked

All as per Srl item No.90 above but 100mm bore

All as per Srl item No.90 above but 150mm bore

All as per Srl item No.90 above but 200mm bore

All as per Srl item No.90 above but 250mm bore

All as per Srl item No.90 above but 300mm bore

All as per Srl item No.90 above but 350mm bore

All as per Srl item No.90 above but 400mm bore

Laying only cast iron pipe with spigot and socket ends centrifugally Cast class -B in any length laid in treches of 450 mm dia for repairs of Watersupply line complete all as specified and directed . Note :- CI Pipe shall be issued under Sch 'B' as free for laying

Supplying and laying DI pipe with spigot ends suitable for tyton joints K-7 pipe for the size of 80 mm bore complete all as specified and directed . Make : Electro Steel/TATA/LANCO with ISI Marked

All as per Srl item No.99 above but 100mm bore

All as per Srl item No.99 above but 150mm bore

All as per Srl item No.99 above but 200mm bore

All as per Srl item No.99 above but 250mm bore

All as per Srl item No.99 above but 300mm bore

All as per Srl item No.99 above but 350mm bore

All as per Srl item No.99 above but 400mm bore

All as per Srl item No.99 above but 450mm bore

Taking down of existing unserviceable sluice valve of 50mm dia from the existing pipe line & S&F new sluice valve the following sizes CI body ISI marked class PN 1.6 heavy duty flanged ends cast iron wheel with SS spindle (ISI marked) conforming to IS : 14786 – 2000, short body including nuts ,bolt, washers and gasket complete all as specified and directed. Note: Quoted rate deemed to included for making good the damaged valve chamber

All as per Srl item No.108 above but 80mm dia

All as per Srl item No.108 above but 100mm dia

All as per Srl item No.108 above but 150mm dia

S&F double action flanged Air release valve of size 80 mm dia including taking down the existing unserviceable ARV from the existing pipe line including replacement of bolt, nuts with washers and gasket complete all as specified and directed by Engr-in-Charge. Make: KSB/Kirloskar/Kartar

M&L for cutting of bituminous road/floor/plinth protection for laying pipe not exceeding 1.5mm and 1.5 depth including refiling with excavated material and watering, well ramming/compacting and making good with PCC 100 mm thick complete all as specified and directred. Note: PCC shall be measured and paid separately

M&L for PCC 1:4:8 type B 1 using 20 mm graded aggregate as in filling and making good distrubed surface complete all as specified and directed

Disconnecting cable connection from exsiting unserviceable Soft starter suitable for 240 HP Capacity motor at Berthuma Pump house(New & Old), 415V, 3 Phase,50Hz and including replacement of such a spare parts of Bypass relay and contactor, Plate and stays, USB cable , current transformer, connection kit etc and making serviceable condition testing and commissioning complete all as specified and directed by Engineer -in-Charge Note: Replacement of Spares shall be measured under relevant items

Supply only By Pass relay complete all as specified and directed

Supply only Contactor complete all as specified and directed

Supply only Plate and stays complete all as specified and directed

Supply only Current Trasnformer complete all as specified and directed

Supply only USB Cable complete all as specified and directed

Supply only Connection Kit complete all as specified and directed

Supply only MNX-400 Contactor 400 A, 3 pole, 2NO+n-2NC-CS 94144 complete all as specified and directed. Make:- L&T

Supply only MNX-300 Contactor 300A 3 pole, 2NO+n-2NC complete all as specified and directed . Make:- L&T

Disconnecting & dismantling the cable connection from exiting Soft starter suitable for 135 HP Capacity VT Turbine Pump set at Chittora Pump house, 415V, 3 Phase,50Hz and including replacement of such a spare parts of Bypass relay and contactor, Plate and stays, USB cable , current transformer, connection kit etc and making serviceable condition testing and commissioning complete all as specified and directed by Engineer -in-Charge Note: Replacement of Spares shall be measured under relevant items

Supply only By Pass relay complete all as specified and directed

Supply only Contactor complete all as specified and directed

Supply only Plate and stays complete all as specified and directed

Supply only Current Trasnformer complete all as specified and directed

Supply only USB Cable complete all as specified and directed

Supply only Connection Kit complete all as specified and directed

Taking out the existing Star-delta starter suitable for 10/15/20/30/40/135/240 HP Capacity motor from panel, cleaning the electrnic parts from inside, refixing the OLR, Contactor, NVC,and SPP connecting link wires etc of the following capacity motor complete all as specified and directed by the Engineer-in-charge Note:- : Quoted rate shall be deemed to include to replacement of spares and making serviceable condition

S&F over load relay complete all as specified and directed

S&F No Volt Coil complete all as specified and directed

S&F Single phase preventer complete all as specified and directed

S&F Main Contactor complete all as specified and directed

S&F Star Contractor complete all as specified and directed

S&F Delta Contactor complete all as specified and directed

S&F 12 Contactor` complete all as specified and directed

S&F star delta Starter 3Ph, 415 V suitable for 7.5/10 HP Motor, including replacement of copper lugs as per suitable and making suitable mounting on wall/floor stand with angle bolt,nut with wahsers as per size complete all as specified and directed

All as per item Sl.No. 28 here in before but 20/30 HP Motor

All as per item Sl.No. 28 here in before but 40 HP Motor

S&F DOL starter 415V, 50Hz, 3 Phase suitable for Upto to 7.5 HP Motor, including replacement of copper lugs as per suitable and making suitable mounting on wall/floor stand with angle bolt,nut with wahsers as per size complete all as specified and directed

Taking out the existing DOL Starter suitable for upto 7.5 HP Capacity motor from panel, cleaning the electrnic parts from inside, refixing the OLR, Contactor, NVC,and SPP connecting link wires etc of the following capacity motor complete all as specified and directed by the Engineer-in-charge Note:- Quoted rate shall be deemed to include to replacement of spares and making serviceable condition

S&F Contactor & Coil complete all as specified and directed

S&F Over load relay complete all as specified and directed

S&F Main Contactor complete all as specified and directed

S&F Relay coil contactor complete all as specified and directed

S&F Thermal over load Relay complete all as specified and directed

S&F Pressing start bush complete all as specified and directed

S&F Relase Start bush complete all as specified and directed

S&F Pushing stop bush complete all as specified and directed

S&F in repair PVC insulated unsheathed wire copper conductor 1100 volt grade multistrandred 1100 Volts grade, cross sectional area 150 sqmm with single core in PVC adepteble trunking system for installations with all accesories complete all as specified and directed .Make:- Havells/Finolex/Polycab

All as per Srl item No. 152 above but 95 Sqmm

S&F in replacement rotational moulded polyethylene water stroage tanks 500 Ltr Capacity (Cylinderical vertical with closed top) three layered wall construction hoisted and fixed in position complete all as specified and directed. Make:- Sintex/Rotex/Polywell

Taking out unserviceable ball valve (Float valve) high pressurre of PTMT with epoxy coated Aluminium tod& high density plastic ball screwed for iron pipe and fixed (Mini Weight 15 mm -142 gms) of size 15 mm dia complete all as specified and directed. Make:- Prayag/Leader

All as per srl item No.155 above but 20 mm dia (Ball weight 210 gms)

All as per srl item No.155 above but but 25 mm dia (Ball weight 455 gms)

S&F mechanical Joint suitable for (T Joints) CI/DI Pipe of 80mm bore including for rubber 'O' rings and bolt,nut with washers complete all as specified and directed

All as per Srl item No.158 above but 100mm bore

All as per Srl item No.158 above but 150mm bore

All as per Srl item No.158 above but 200mm bore

All as per Srl item No.158 above but 250mm bore

All as per Srl item No.158 above but 450mm bore

Supply and fixed in repairs including leak proof of GI socket 15mm bore, ISI marked, laid in trenches/floors etc complete all as specified and directed. Note: Excavation and earth work shall be measured and paid seperately

All as per Srl item No.164 above but GI Union 15mm bore

All as per Srl item No.164 above but GI elbow 15mm bore

All as per Srl item No.164 above but GI Socket 20 mm bore

All as per Srl item No.164 above but GI Union 20 mm bore

All as per Srl item No.164 above but GI Elbow 20 mm bore

All as per Srl item No.164 above but GI Socket 25 mm bore

All as per Srl item No.164 above but GI Union 25 mm bore

All as per Srl item No.164 above but GI Elbow 25 mm bore

All as per Srl item No.164 above but GI Socket 40 mm bore

All as per Srl item No.164 above but GI Union 40 mm bore

All as per Srl item No.164 above but GI Elbow 40 mm bore

All as per Srl item No.164 above but GI Socket 50 mm bore

All as per Srl item No.164 above but GI Union 50 mm bore

All as per Srl item No.164 above but GI Elbow 50 mm bore

All as per Srl item No.164 above but GI Socket 80 mm bore

All as per Srl item No.164 above but GI Union 80 mm bore

All as per Srl item No.164 above but GI Elbow 80 mm bore

All as per Srl item No.164 above but GI Pipe Nipple 15 mm dia 3" long

All as per Srl item No.164 above but GI Pipe Nipple 15 mm dia 6" long

All as per Srl item No.164 above but GI Pipe Nipple 20 mm dia 3" long

All as per Srl item No.164 above but GI Pipe Nipple 20 mm dia 6" long

All as per Srl item No.164 above but GI Pipe Nipple 25 mm dia 3" long

All as per Srl item No.164 above but GI Pipe Nipple 25 mm dia 6" long

All as per Srl item No.164 above but GI Pipe Nipple 40 mm dia 3" long

All as per Srl item No.164 above but GI Pipe Nipple 40 mm dia 6" long

All as per Srl item No.164 above but GI Pipe Nipple 50 mm dia 3" long

All as per Srl item No.164 above but GI Pipe Nipple 50 mm dia 6" long

All as per Srl item No.164 above but GI Pipe Nipple 80 mm dia 3" long

All as per Srl item No.164 above but GI Pipe Nipple 80 mm dia 6" long

All as per Srl item No.164 above but GI Tee Equal 15 mm dia

All as per Srl item No.164 above but GI Tee Equal 20 mm dia

All as per Srl item No.164 above but GI Tee Equal 25 mm dia

All as per Srl item No.164 above but GI Socket reducer 20x15 mm

All as per Srl item No.164 above but GI Socket reducer 25x15 mm

All as per Srl item No.164 above but GI Socket reducer 25x20 mm

M&L for Shellac Bottle 50ml complete all as directed.

Supply only PVC Flexible Green Suction and Delivery hose 100 mm dia complete all as directed.

Supply only PVC Flexible Green Suction and Delivery hose 80 mm dia complete all as directed.

Supply only GI Adjustable Hose Clamp suitable for 100 mm dia Hose pipe complete all as directed.

Supply only GI Adjustable Hose Clamp suitable for 80 mm dia Hose pipe complete all as directed.

Supply only CI Adapter suitable for 100 mm dia pipe complete all as directed.

Supply only CI Adapter suitable for 80 mm dia pipe complete all as directed.

Supply only CI Hose nipple suitable for 100 mm dia flange/bend complete all as directed.

Supply only Rubber insertion sheet 2 mm thick complete all as directed.

Supply only Rubber insertion sheet 4 mm thick complete all as directed.

Supply only Rubber insertion sheet 6 mm thick complete all as directed.

Supply only Aluminium sulphate(non ferric alum) with Al2O3 - 16 % in the form of 20 Kg - 22 Kg slab suitable for water purification and drinking purpose complete all as specified and directed

Supply only TCCA -90 (Trichloroisocyabnuric acid) for Swimming pool complete all as specified and directed

Supply only calcium based granular high strength disinfectant chlorinating chemical for treatment of Drinking water complete all as directed by Engineer-in-Charge. Make:-AQUAFIT /DECLIBAC Note:-(i) Brand name, Batch no and complete particulars of mananufacturer sholud be printed on the container/packing (ii) Necessary test certificate shall be provided from authorized laboratory (iii) Material shall be ordered one month in advance by the department

Material and labour for repair/servicing of Aqua fit dozing system high pressure single head adjustable 5Kg/cm2 max out put dozing pumps electrically operated single phase 220V 50Hz, 960 RPM, 120W including replacement of unservieable spares and recommissiong and testing after repair complete all a specified and directed Note:-Spares requird for servicing shall be measured and paid seperately under relevent items mentioned below.

Supply only special flexible nylon suction tubing 15 mm dia to with standwater pressure minimum 10Kg/cm square suitable for existing chemical dozing pumps

Supply only suction valve Non-metallic suitable for existing chemical dozing pumps

Supply only injection/check valve non metallic suitable for existing chemical dozing pumps

Supply only PCB for chemical dozing pump complete all as directed

Supply only chemical level sensing automatic shout down switch complete all as directed

SHRI RAM ELECTRICALS ENTERPRISES