Providing Electrical works for shifting of IFA and CAO(TA) office from CSC Bldg. to Admin Block at CTO Compound, Agra.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. (a) Group 'A'

Wiring for circuit/submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. (a) 2 x 1.5 sq. mm + 1 x 1.5 sq. mm earth wire

2 x 2.5 sq.mm. + 1 x 2.5 sq. mm earth wire

2 x 4 sq.mm. + 1 x 4 sq. mm earth wire

2 x 6 sq.mm. + 1 x 6 sq. mm earth wire

Supplying and drawing following size of FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel / PVC conduit etc as required. (a) 2 x 1.5 Sq. mm

4 x 1.5 Sq. mm

2 x 2.5 Sq. mm

2 x 4 Sq. mm

Supplying and fixing of following size of steel conduit along with accessories in surface / recess i/c painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit etc as required. (a) 20 mm

Supplying and Fixing of following piano type switch/ socket in place of faulty components in existing switch board , Power points i/c connections etc as required. a) 5/6 Amp single way Switch

b) 3Pin 5/6 Amp Socket outlet

c) 15/16 Amp Switch

d) 6 pin 15/16 Amp Socket outlet

e) 3pin 5Amp Ceiling Rose

f) 200mmx250mmx60 deep MS box i/c phenolic laminated sheet cover etc

g) Phenolic laminated sheet cover in front suitable for 250mmx300mm x 60 mm deep MS box etc

h) Phenolic laminated sheet cover in front suitable for 180mmx100mm x60 mm deep MS box etc

S/Fixing 20 watt LED 4 feet tube fitting suitable for single phase, 230 volts AC supply system connection etc complete as required.(M/s Cromption/ Philips or S.S make)

Replacement of following faulty components in existing fitting and fans i/c connections etc as required . a) 40W. 1200mm Flou. Tube (Philips/Crompton Make)

b) 40 W. Electronic Ballast (Philips/Crompton Make)

c) Starter for Flou. Tobe Light

d) 12 watt LED lamp

c) Brass Batten Holder

g) Electronic fan regulator ISI Marked

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.

Supply & Fixing metal box of 180mm x 100mm x 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front i/c providing and fixing 6 pin 5/6 & 15/16 Amps socket outlet and 15/16 Amps piano type switch connection, painting etc. as required.

SITC of 400 mm Sweep oscillating type cabin fan suitable for operation on 230 volts 50 Hz. A.C. supply complete with accessories etc (M/s Havells/Crompton/Khaitan make)

Supplying and fixing 2 waysheet steel enclosure dust protected, duly powder painted with 20 amps "C" curve, SP&N MCB on surface or in recess complete with connections, testing and commissioning etc. as required.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. a) Upto 35 sq. mm

S/M end termination with brass compression gland and aluminum luges for the following size PVC insulated and sheathed aluminum conductor cable of 1.1 KV grade etc. as reqd. a) 3½ X 25 sq. mm (28mm)

a) 3½ X 25 sq. mm (28mm) without gland

Shifting of 02 Nos. existing window A/c units from Ist Floor of CSC Bldg. to Ground Floor of Admn. Block i/c loading, unloading, transportation, dismentalling and ITC of window A/c units in existing opening and making good the damages etc. complete as reqd.

S/Fixing following way distribution board made of sheet steel on surface/ recess having IP 42 & 43 protection double metal door complete with all standard accessories, inter connection i/c painting earthing etc. as required. (a) 4 Way TPN DB [M/s Legrand Cat No. 5076 70 or ss Make]

Supplyng & Fixing of following rating MCBs/ Isolators in the existing MCB DBs complete with connections, testing and commissioning etc. as required. (a) 06-32 Amp SP MCB (M/s Legrand or ss Make)

63 Amp TPN MCB ( M/s Legrand or ss Make )

bindal electricals & engineers