Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹35.5 LAccepted-AOC FLAT NO S 2 SHRI CHINTAMANI S NO 1 1148 MAHAJAN PETH MODEL COLONY SHIVAJI NAGAR PUNE 411016 | PUNE | PUNE | MAHARASHTRA | 411016 | L1 | Accepted-AOC Bidder quoted L1 rates | |
| 2 | L2₹35.7 L+₹22,148.70 (0.62%)Rejected-Finance | L2 | Rejected-Finance Higher Amount quoted | |
| 3 | L3₹36.6 L+₹1.1 L (3.08%)Rejected-Finance | L3 | Rejected-Finance Higher Amount quoted | |
| 4 | L4₹41.7 L+₹6.2 L (17.5%)Rejected-Finance | L4 | Rejected-Finance Higher Amount quoted | |
| 5 | L5₹41.8 L+₹6.3 L (17.9%)Rejected-Finance | L5 | Rejected-Finance Higher Amount quoted |
Tender Value
Refer Docs
EMD Value
₹87,360
Closing Date
26 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE Pune
CWE Pune 411001
PROVN OF PT INFRA AT VARIOUS PLACES AT NDA KHADAKWASLA UNDER GE KHADAKWASLA
2023_MES_590904_3
81739
Open Tender
Civil Works
Works
180 days
Khadakwasla
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE (NDA) KHADKAWASLA
₹87,360
Yes
11 Sept 2023
6 Jun 2023
28 Jun 2023
6 Jun 2023
26 Jun 2023
13 Jun 2023
Amount
Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in hard dense soil, complete all as specified and directed by the Engineer-in-Charge.
Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft soil complete all as specified and directed by the Engineer-in-Charge.
M&L for RCC M-25 concrete (20mm graded crushed stone aggregate) in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed by the Engineer-in-Charge.
M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter in Rough finished concrete complete all as specified and directed by the Engineer-in-Charge.
M&L for Broken stone Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed by the Engineer-in-Charge.
M&L for Broken bricks bats Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed by the Engineer-in-Charge.
M&L for providing plain cement concrete 1:2:4 type B0 using 12.5 mm grade crusted aggregate as in coping, kerb, bed block complete all as specified and directed by the Engineer-in-Charge.
M&L for providing 50 mm thick plain cement concrete 1:2:4 type B1 using 40mm grade crusted aggregate as in flooring finishing cement concrete surface even and smooth without using extra cement with spike rolling or making impressions of expanded metal complete all as specified and directed by the Engineer-in-Charge.
M&L for providing 75 mm thick plain cement concrete 1:4:8 type D2 using 40mm grade crusted aggregate as in sub base or similar works complete all as specified and directed by the Engineer-in-Charge.
M&L for plain cement concrete type C-2 using 40mm graded stone aggregate (1:3:6) as in foundation, filling and mass concrete works complete all as specified and directed by the Engineer-in-Charge.
M & L for plain cement concrete type D-2 using 40mm graded stone aggregate (1:4:8) as in foundation, filling and mass concrete works complete all as specified and directed by the Engineer-in-Charge.
M & L for Glass dividing strips, 3 mmX38mm width thick complete all as specified and directed by Engineer in charge
M&L for river Sand filling under floors or in foundations including watering and consolidation with size (passing throught 2.36 mm and retained on 600 micron sieve) complete all as specified and directed by the Engineer-in-Charge.
M&L for precast cement concrete block walling exc. 10 cm width with solid block PCC 1:5:8 gre D-5 design mix and setting in cement mortar (1:6) complete all as specified and directed by the Engineer-in-Charge.
M&L for providing rendering 15mm thick on fair faces of brick or concrete surfaces in CM (1:4) finishing even and smooth without using extra cement fair complete all as specified and directed by the Engineer-in-Charge.
M&L for Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe 410 -W (Gde- E- 250) quality-A complete all as specified and directed by the Engineer-in-Charge. (Note: The working height of building is 12 meter (approximately). The tenderer shall be quote accordingly and nothing extra shall be paid on this account.)
S&F in Rolled mild steel in Roof trusses (framed), trussed, purlins, crane gantries, tubular rail (any section and size) and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed by the Engineer-in-Charge. (Note: The working height of building is 12 meter (approximately). The tenderer shall be quote accordingly and nothing extra shall be paid on this account.)
S&F Rolled mild steel in Joist, channel, angle, or tee sections, fixed independently as in Pillar/Girder with connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) Fe 410-W (Gde- E- 250) quality- A complete all as specified and directed by the Engineer-in-Charge. (Note: The working height of building is 12 meter (approximately). The tenderer shall be quote accordingly and nothing extra shall be paid on this account.)
M&L for two coats of cement based paint over one coat of chalk whiting primer on wall surfaces including preparation of new treated surface complete all as specified and directed by the Engineer-in-Charge.
S&F in rolled mild steel in Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe 410 -W (Gde-E- 250) quality-A complete all as specified and directed by the Engineer-in-Charge.
S&F Mild steel bolts/Eye foundation bolt exc 20 mm and n exc 25 mm dia purpose made with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut. exc 30 cm long inserted in concrete or MS structure complete all as specified and directed by the Engineer-in-Charge.
Excavation in trenches n.exc 1.5m deep & n.exc1.5m wide for foundation etc in hard rock (Manjari rock) and getting out in complete all as specified and directed by the Engineer-in-Charge.
Returning filling in soil including spreading levelling, watering & well ramming in layers n. exe 25cm (hard dense soil) complete all as specified and directed by the Engineer-in-Charge.
S&F for 110mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to wall or floor etc using synthetic rubber adhesive cement solvent complete all as specified and directed by Engineer -in-charge
Mild steel bars but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed by the Engineer-in-Charge.
M&L TMT Bars 10mm dia and over cut to length bent to shape required including cranking bending and spirally for hooping for columns hooking ends and binding with ms wire n. less than .9mm dia complete all as specified and directed by the Engineer-in-Charge.
S&F hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed by the Engineer-in-Charge.
M&L for preparing new steel surface and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by the Engineer-in-Charge.
S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by the Engineer-in-Charge. (Note: The working height of building is 12 meter (approximately). The tenderer shall be quote accordingly and nothing extra shall be paid on this account.)
M&L for 1st class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed by the Engineer-in-Charge.
M&L for Cast iron work grade FG 150, machined, in pulleys and similar articles Articles exc 5 kg each complete all as specified and directed by the Engineer-in-Charge.
M&L for preparing new wooden surface of any description and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by the Engineer-in-Charge.
S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by the Engineer-in-Charge.
Removing excavated material exc. 1.50 km but n exc. 5 km and depositing where complete all as specified and directed by the Engineer-in-Charge.
Harish Enterprises
Bharekar Construction
M/S Narendra Construction
Tejas Enterprises
Sayili Enterprises
Mehta and Co.
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .