Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹14.6 CrAdmitted-Finance | ₹14.6 Cr | L1 | Admitted-Finance |
| 2 | L2₹17.5 CrAdmitted-Finance PURULIA | WEST BENGAL | 723101 | ₹17.5 Cr | L2 | Admitted-Finance |
| 3 | Rejected-Technical | - | - | Rejected-Technical Reject |
| Sl No | Description | Qty | Unit | CSE CONSTRUCTION (INDIA) PRIVATE LIMITED L2 | Surendra Infrastructure Pvt. Ltd. L1 |
|---|---|---|---|---|---|
| 1.00 | Clearing and Grubbing Road Land
Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201 MORD . including contractors profit & Over head charges, etc., complete. | 28,989 | sq.m | 50 ₹14.5 L | 35 ₹10.1 L |
| 2.00 | BT - SCARIFYING
Scarifying existing granular surface to a depth of 50 mm and spreading scarified material in uniform layers with Tractor grader and compacting with Vibratory Roller to achieve the desired density as per Technical Specification Clause 301.9 of MORD ,including contractors profit & Over head charges, etc., complete. | 4,260 | Sq.m | 50 ₹2.1 L | 25 ₹1.1 L |
| 3.00 | Scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material with all lifts and lead upto 1000 m as per Technical Specification Clause 501.2.2 of MORD including contractors profit & Over head charges,etc., complete. | 33,829.5 | sq.m | 50 ₹16.9 L | 25 ₹8.5 L |
| 4.00 | Wet Mix Macadam
Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with Vibratory Roller 80-100 kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and Technical Specification Clause 406 MORD, including contractors profit & Over head charges etc., complete | 2,895.71 | cu.m | 5,800 ₹1.7 Cr | 4,800 ₹1.4 Cr |
| 5.00 | Prime Coat
Low porosity
Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per Technical Specification Clause 502 MORD (for use on Wet mix macadam & WBM) ,including contractors profit & Over head charges, etc., complete for Prime Coat | 36,589.5 | sq.m | 110 ₹40.2 L | 92 ₹33.7 L |
| 6.00 | TACK COAT
Tack coat on dry and hungry BT surface
Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared dry and hungry bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503. | 20,339.25 | sq.m | 55 ₹11.2 L | 35 ₹7.1 L |
| 7.00 | Tack coat on Granular surface
Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 503 MORD, including contractors profit & Over head charges, etc., complete for Tack Coat | 40,630.5 | sq.m | 55 ₹22.3 L | 35 ₹14.2 L |
| 8.00Bituminous Concrete with shredded waste plastic (Grading-II) Providing and laying bituminous concrete 40 mm compacted thickness (8% of shredded waste plastic) with 40-60 TPH batch type hot mix plant producing an average output of 35 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder VG-30 @ 5.4 to 5.6 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 509 complete in all respects. | |||||
| 8.01 | Note: The Basic Rate of Shredded Waste plastic rates are provided by A&N Administration [Office order No.152, dated 10th January 2019]. | 2,332.91 | cu.m | 23,500 ₹5.5 Cr | 19,000 ₹4.4 Cr |
| 9.00 | SHOULDERS
Excavation in Soil with Dozer with lead upto 100m
Excavation for roadway in soil by mechanical means including cutting and pushing the earth to site of embankment upto a distance of 100 m, including trimming bottom and side slopes in accordance with requirements of lines, grades and cross-sections as per Technical Specification Clause 302.3 MORD. including contractors profit & Over head charges etc., complete | 7,442.33 | cu.m | 305 ₹22.7 L | 235 ₹17.5 L |
Tender Value
₹15.1 Cr
EMD Value
₹25.1 L
Closing Date
12 May 2023, 3:00 pmClosed
Executive Engineer, CD, APWD, Diglipur
Executive Engineer, CD, APWD, Diglipur
Upgradation of Rural Road No. DGRRR0201B, LKPRR0052B, MDPRR0106B, RDNRR0001B, RDNRR0004B, STNRR0152B and SUGRR0257B under Special Financial Assistance SFA at Diglipur Tehsil, North and Middle Andaman
2023_APWD_10044_1
NIT No. 175/Tech/SE(P)/CE/2022-23
Open Tender
Civil Works - Roads
540 days
Diglipur, North Andaman
Please refer Tender documents.
11 documents required · 11 mandatory
₹0
₹25.1 L
Yes
CE Office APWD, Port Blair
17 Jul 2023
11 Apr 2023
12 May 2023
11 Apr 2023
12 May 2023
24 Apr 2023
11 Apr 2023 - 24 Apr 2023
20 Apr 2023
Amount
Clearing and Grubbing Road Land Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201 MORD . including contractors profit & Over head charges, etc., complete.
BT - SCARIFYING Scarifying existing granular surface to a depth of 50 mm and spreading scarified material in uniform layers with Tractor grader and compacting with Vibratory Roller to achieve the desired density as per Technical Specification Clause 301.9 of MORD ,including contractors profit & Over head charges, etc., complete.
Scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material with all lifts and lead upto 1000 m as per Technical Specification Clause 501.2.2 of MORD including contractors profit & Over head charges,etc., complete.
Wet Mix Macadam Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with Vibratory Roller 80-100 kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and Technical Specification Clause 406 MORD, including contractors profit & Over head charges etc., complete
Prime Coat Low porosity Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per Technical Specification Clause 502 MORD (for use on Wet mix macadam & WBM) ,including contractors profit & Over head charges, etc., complete for Prime Coat
TACK COAT Tack coat on dry and hungry BT surface Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared dry and hungry bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503.
Tack coat on Granular surface Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 503 MORD, including contractors profit & Over head charges, etc., complete for Tack Coat
Bituminous Concrete with shredded waste plastic (Grading-II) Providing and laying bituminous concrete 40 mm compacted thickness (8% of shredded waste plastic) with 40-60 TPH batch type hot mix plant producing an average output of 35 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder VG-30 @ 5.4 to 5.6 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 509 complete in all respects.
Note: The Basic Rate of Shredded Waste plastic rates are provided by A&N Administration [Office order No.152, dated 10th January 2019].
SHOULDERS Excavation in Soil with Dozer with lead upto 100m Excavation for roadway in soil by mechanical means including cutting and pushing the earth to site of embankment upto a distance of 100 m, including trimming bottom and side slopes in accordance with requirements of lines, grades and cross-sections as per Technical Specification Clause 302.3 MORD. including contractors profit & Over head charges etc., complete
Granular Sub-base with Well Graded Material (Table 400.1-A) Construction of granular sub-base by providing well graded material(Table 400.1-A) with Grading III Material(HBG M/C +Stone dust) CBR Value not less than 20 and PI Value less than 6 spreading in uniform layers with Tractor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with Vibratory Roller to achieve the desired density, complete as per Technical Specification Clause 401 MORD including contractors profit & Over head charges, etc., complete.
WBM Grading 2 (using Graded Metal) Providing, laying, spreading and compacting stone aggregates of specific sizes for Grading 2 material to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with Vibratory roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 2 as per Technical Specification Clause 405 MORD. For compacted thickness of 75 mm. including contractors profit & Over head charges, GST etc., complete for Grade II
Cement Concrete Pavement Construction of un-reinforced, plain cement concrete pavement, thickness as per design, over a prepared sub base, as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS : 383, maximum size of coarse agregate not exceeding 25mm and cement content in the mix to be 350 kg /cum (Ordinary portland cement ) with minimum water cement ratio of 0.45, mixed in a concrete mixer and appropeiate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 mictron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle, scareed and plate vibrators and finished in continuous operation including provision of contraction and construction joints, applying debonding strips, primer bitumenous sealant, admixers as adopted, curing of concrete slabs for 14- days, curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501.22 MORD including cost of materials, labour charges, conveyance, hire charges of machinaries etc complete as per direction of Engineer in charge for CC pavement inlcuding contractors profit & Over head charges, etc., complete For 160mm thick with 2.50 m joint spacing.
Construction of unlined surface drains of average cross-sectional area 0.40 sqm in soil to specified lines, grades, levels and dimensions. Excavated material to be used in embankment with a lift upto 3m and lead of 50 m (average lead 25 m) as per Technical Specification Clause 307.
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH, including contractors profit & Over head charges, etc., complete- For Foundations
Ordinary soil
Providing concrete for plain concrete M-10 grade in open foundations using 40 mm nominal size hard stone aggregate (HBG), mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 MORD and 1500, 1700 & 2100 MORTH ,including contractors profit & Over head charges, etc., complete For levelling course
P.C.C grade M 10
Reinforced cement concrete M20 grade (Design Mix) using 20 & 10mm metal (HBG) mechanically mixed in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 and 1206 MORD and 1500, 1700 & 2200 MORTH ,including contractors profit & Over head charges, etc., complete (upto 5m height)
For Sub Structure R.C.C. grade M 20 (Design Mix)
Supplying, fitting and placing HYSD bar reinforcement (Fe 415) in substructure complete as per drawings and technical specification Clauses 1001 & 1206 MORD / Sections 1600 & 2200 MORTH for Bars below 36 mm dia including over laps and wastage, where they are not welded ,including contractors profit & Over head charges, etc., complete- For Sub Structures
Plastering with cement mortar (1:4) 15 mm thick, in substructure as per technical specification Clauses 613.4 & 1206 MORD including cost and conveyance of all materials, Overheads & contractor's profit, etc., complete.
Reinforced cement concrete M15 grade kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703 MORD / 804 MORTH including contractors profit & Over head charges, GST etc., complete
5th Kilometre Stone (precast)
Ordinary Kilometer Stone (Precast)
200 m / Hectometer stone (precast)
Painting lines, Dashes, Arrows, etc. on Road in Two Coats on New Work
Painting lines, dashes, arrows, etc. on roads in two coats on new work with ready mixed road marking paint conforming to IS:164 on bituminous/concrete surface, including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control as per drawing and Technical Specification Clause 1702
Providing and fixing of semi-reflective cautionery, mandatory and informatory boards as per IRC:67 made of 1.5mm thick MS sheet duly stove enamelled paint in white colour in front and grey colour on back with red reflective boarder of 65mm width and required letters and figures with reflective engineering grade tape as per clause 1701.3.8 of MORD for rural roads specification of required shade and colour supported and welded on 47x47mm of 12 SWG square tube of 3050mm height duly strenthened by 25x5mm MS flat iron on edges on back firmly fixed to ground by means of properly designed foundations with M-15 grade CC 450x450x600 mm , 600mm below ground level as per approved drawings and technical specification Clause 1701.2.2 of MORD including contractors profit & Over head charges, including CPOH, cess & GST etc., complete with 600X 600 mm size MS sheet
Providing and fixing typical “Citizen’s information Board” with Logo as per NRRDA Specifications and Drawing having two nos. MS plate of 1mm thick 900 x 750mm size each duly welded with 2 nos. vertical and 4 nos. Horizontal M.S. flat 50mm x 6mm size on back, the ends of the M.S. flats to be welded with 2x2450mm x 1150mm frame of M.S. square posts to be embedded in cement concrete M-15 grade of 600mm x 600mm size and 750mm below the ground level and keeping 50mm height above the ground level, two coats of epoxy painting MS square , flats and backside of the the M.S. sheets with a coat of primer and two coats of ready mixed approved brand synthetic oil bound paint over a coat of epoxy coated priming on rear side of the M.S. plates with bands and lettering of different approved shades as directed shown in the approved design with oil bound ready mixed synthetic paint and providing 70mm x 70mm size Logo.( As per Fig(3) of Road Signage published by NRRDA on Dec 06).
Providing and fixing of typical Maintenance Information board with Logo as per MORD Specifications and Drawing. Three MS Plates of 1.6mm thick, top and middle plate duly welded with MS flat iron 25mm x 5mm size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lowermost frame and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The topmost diamond plate will be welded to the middle plate 47mm x47mm of 12 SWG steel plate tube. All MS will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of frame post and steel tube will be painted with primer and two coats of epoxy paint as per Drawing Clause 1701 and Annexure 1700.1. (As per fig. 5 of Road signage published by the NRRDA on Dec'06)
05 Year Maintenance Provision
Routine maintenance cost for 1st Year
Routine maintenance cost for 2nd Year
Routine maintenance cost for 3rd Year
Routine maintenance cost for 4th Year
Routine maintenance cost for 5th Year
CSE CONSTRUCTION (INDIA) PRIVATE LIMITED
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.64 MB
TenderDocumentNIT175CE.pdf
Tender Documents • 2.12 MB
BOQ_10714.xls
BOQ • 0.31 MB
Download all tender documents and submit your bid