REPAIR TO LT OH LINE, LT UG CABLE, LT PANELS, STREET LIGHTS AND REPAIR/ RENEWAL OF WATER SUPPLY DISTRIBUTION LINE AND ALLIED WORKS AT CERTAIN UNITS UNDER GE(UTILITY) SECUNDERABAD.

Supply, fabrication, installation, and commissioning of a retro-reflective glow sign board for Complaint cell and electrical installations with respective rating and Area, complete in all respects and as specified and directed by the Engineer-in-Charge. The work comprises providing a double-sided sign board of size 2000 mm × 1500 mm made of 2 mm thick Aluminium Composite Panel with 2 mm aluminium skin, incorporating High-Intensity Prismatic Type IV retro-reflective sheeting conforming to IRC:67–2012, with a green background and white computerized cut vinyl reflective lettering as approved by the Engineer-in-Charge, designed to reflect light when illuminated by external sources such as vehicle headlights. The sign board shall be supported on two 40 mm diameter mild steel (MS) pipes of 3 mm thickness conforming to IS:1239, fixed at a height of 3.5 m above ground level, complete with base plates of size 150 mm × 150 mm × 6 mm and anchor bolts. The MS members shall be finished with two coats of anti-corrosive primer followed by two coats of synthetic enamel paint in green colour. The work includes providing PCC M15 (1:2:4) foundations for each pole measuring 0.40 m × 0.40 m × 0.60 m, including excavation, reinforcement with four numbers of 8 mm diameter MS bars conforming to IS:432, centring, formwork, backfilling, and curing. The sign board shall be securely fixed using stainless steel bolts, nuts, and washers (M10) conforming to IS:1367. The job includes all labour, materials, tools, plants, transportation, alignment, levelling, erection, and finishing, complete in accordance with relevant IS standards, IRC specifications, MES practices, and as directed by the Engineer-in-Charge.

Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth, for foundation of PCC/ Steel pole, laying of cable in trenches etc and getting out in hard / dense soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soils complete all as specified and directed.

Removing excavated material (soils) n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

Supplying and laying of following size DWC HDPE pipe for cable protection of 63 mm dia (OD-63 mm & ID-51 mm nominal) ISI marked along with all accessories conforming to IS 16025, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required

All as per item no.5.00 above but 125mm dia (OD-120 mm & ID- 102 mm nominal)

S&F in replacement PVC insulated unarmed/ unsheathed cable with stranded Aluminium conductor 1100 Volts grade, flat twin core service cable of size 4 Sqmm conforming to IS:694/ 1990 with latest amendments ISI including disconnecting/ taking out existing unsv/ damaged old service cable complete all as specified and directed.

M&L in replacement for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area laid in trenches / duct or fixed to wall / passing through pipe on pole with suitable size cable glands, crimping type cable lugs for stranded aluminium conductor of following sizes complete all as specified and directed :- 4C X 10 Sqmm Note:- Excavation and earthwork will be measured and paid separately

All as per item no. 8.00 above but 4 Core X 16Sqmm

All as per item no. 8.00 above but 4 Core X 25 Sqmm