REPAIRS PAINTING TO STEEL FURNITURE, REPLACEMENT OF PLYWOOD TOP OF CHARPOY BED HARDBOARD DOUBLE BUNK CHARPOY UNDER GE CENTRAL BANGALORE

Amount

Almirah large/medium steel FD- 67 /1031 /68/1032 (a) Supply and fixing in repairs 125mm long steel chromium plated handle for Almirah medium/large(steel) in position complete all as shown on drg No FD- 67 /1031 /68 /1032 and as directed by Engineer-in-Charge.

(b) Supply and fixing in repairs MS lock 65mm replaced with brass lock and 6 levers with two keys of suitable pattern suitable for Almirah medium/large steel in position complete all as shown on drg No FD-67/1031/68/1032 and as directed by Engineer-in-Charge.

(c) Supply and fixing in repairs cover made out of 1mm thick MS sheet made to size and shape as per drawing No FD-67/1031 suitable for three way locking device and fixed with new suitable size of MS screws to Almirah large steel including applying two coats of first quality synthetic enamel paint olive green by spray painting machine over a coat of Red Oxide primer after preparation of new steel surface complete all as directed by Engineer-in-Charge.

(d) Supply and fixing in repairs cover made out of 1mm thick MS sheet made to size and shape as per drawing No FD-68/1032 suitable for three way locking device and fixed with new suitable size of MS screws to Almirah medium steel including applying with two coats of first quality synthetic enamel paint olive green by spray painting over a coat of Red Oxide primer after preparation of new steel surface complete all as directed by Engineer-in-Charge.

(e) Dismantling carefully and taking out the old unservicerable/damaged shelf of Almirah large steel and supply and fixing of new shelf made out of MS sheet 1mm thick bent to shape and welding the same properly in position all as per Drg No FD-67/1031 including applying two coats of first quality synthetic enamel paint olive green by spray painting over a coat of Red Oxide Primer after necessary preparation of surface complete all as directed by Engineer-in-Charge.

(f) Dismantling carefully and taking out the old unservicerable/damaged shelf of Almirah medium steel and supply and fixing of new shelf made out of MS sheet 1mm thick bent to shape and welding the same properly in position all as per Drg No FD-68/1032 including applying two coats of first quality synthetic enamel paint olive green by spray painting over a coat of Red Oxide Primer after necessary preparation of surface complete all as directed by Engineer-in-Charge.

(g) Dismantling carefully and taking out unserviceable/damanged door single leaf of Almirah medium steel and supply and fixing new door single leaf made out of MS Sheet 1mm thick made to size and shape as per drawing No FD-68/1032 including painting the new steel surfaceby applying two coats of first quality synthetic enamel paint olive green by spray painting over a coat of Red Oxide Primer after necessary preparation of surface complete all as directed by Engineer-in-Charge.

(h) Dismantling carefully and taking out unserviceable/damanged door single leaf of Almirah large steel and supply and fixing new door single leaf made out of MS Sheet 1mm thick made to size and shape as per drawing No FD-67/1031 including painting the new steel surface by applying two coats of first quality synthetic enamel paint olive green by spray painting over a coat of Red Oxide Primer after necessary preparation of surface complete all as directed by Engineer-in-Charge.

(j) Removing of unserviceable worn out legs of Almirah large steel of size 485mm x 70mm x 100mm by denting and providing with new legs fabricated out of 1mm thick MS Sheet made to shape and size and fixed in position by means of welding all as per Drg No FD-67/1031 including painting the new steel surface with two coats of first quality synthetic enamel paint olive green by spray painting over a coat of Red Oxide Primer after necessary preparation of surface all as directed

(k) Removing of unserviceable worn out legs of Almirah Medium steel of size 420 x 70 x 100mm by denting and providing with new legs fabricated out of 1mm thick MS Sheet made to shape and size and fixed in position by means of welding all as per Drg No FD-68/1032 including painting the new steel surface with two coats of first quality synthetic enamel paint olive green by spray painting over a coat of Red Oxide Primer after necessary preparation of surface all as directed by Engineer-in-Charge.

Bed Steel Hard FD/E6/MAP/08( R) (a) Removing the unserviceable plywood from bed steel and Supply & fix 12mm thick (7 ply) ply wood top of size 1950mm x 900mm (single piece) BWR, type 'BB', Grade ISI Mark with MS screws as specified all as shown on drg and as directed by Eng-in-Charge.

(b) Removing the unserviceable prelaminated particle board head side & foot side from bed steel and Supply & fix in 18mm thick prelaminated particle board (exterior grade) head side & foot side with MS screws as specified all as shown on drg and as directed by Eng-in-Charge. Note :- Particle board shall be one side decorative choice lamination & other side balancing white lamination.

(c) Removing the unserviceable PVC Shoes from bed steel and Supply & fix in new PVC shoes Four Nos fixed to bottom of legs as specified all as shown on drg and as directed by Eng-in-Charge.

Book Case steel (e) Dismantling carefully and taking out the old unservicerable/damaged shelf of Book case steel and supply and fixing of new shelf made out of MS sheet 1mm thick bent to shape and welding the same properly in position all as per Drg. including applying two coats of first quality synthetic enamel paint of approved colour by spray painting over a coat of Red Oxide Primer after necessary preparation of surface complete all as directed by Engineer-in-Charge.

Charpoy steel OR'S plywood top CWE/FD/77 ( R ) (a) Removing the UNSV plywood from charpoy steel Supply and fix in repairs 12mm thick ply wood top of size 1950mm x 900mm (single piece) BWR Grade bearing ISI Mark with MS screws as specified all as shown on drg and as directed by Eng-in-Charge.

(b) Supply and fixing legs of charpoy steel with MS 32mm Square tube 1.6mm thick 400 mm long , two support rail and clamp for MNF fixed by continuous welding to long & short rail of charpoy OR's to suit with the existing components including painting the entire new exposed steel surface with two coats of synthetic enamel paint over a coat of primer complete made of superior quality all as per drawing and as directed by Engineer-in-Charge.

(c) Removing the UNSV PVC Shoes from charpoy steel Supply and fix in new PVC shoes Four Nos fixed to bottom of legs as specified all as shown on drg and as directed by Eng-in-Charge.

Charpoy steel JCO'S plywood top CECZ/FD/726 (a) Removing the unserviceable plywood from charpoy steel and Supply & fix 12mm thick (7 ply) ply wood top of size 1950mm x 900mm (single piece) BWR, type 'BB', Grade bearing ISI Mark with MS screws as specified all as shown on drg and as directed by Eng-in-Charge.

(b) Removing the unserviceable prelaminated particle board head side from bed steel and Supply & fix in 18mm thick prelaminated particle board (exterior grade) head side with MS screws as specified all as shown on drg and as directed by Eng-in-Charge. Note :- Particle board shall be one side decorative choice lamination & other side balancing white lamination.

(c) Removing the UNSV PVC Shoes from charpoy steel Supply and fix in new PVC shoes Four Nos fixed to bottom legs as specified all as shown on drg and as directed by Eng-in-Charge.

Chair computer & Chair writing with cushion .FD/E6/MAP/01 & FD/E6/MAP/01 (a) Removing the existing unserviceable seat and back cushion from chair computer/chair revolving and supply and fix new seat and back 12mm thick hot pressed ply wood, upholstered with fabric and moulded polyurethane foam with PVC lipping all around to them complete all as drawing and all as directed by Engineer-in-Charge.

(b) Removing the existing unserviceable seat and back cushion from chair revoling executive high back and supply and fix new seat and back 12mm thick hot pressed ply wood, upholstered with fabric and moulded polyurethane foam with PVC lipping all around to them complete all as drawing and all as directed by Engineer-in-Charge.

(c) Removing the existing unserviceable seat and back cushion from chair steel with cushioned seat & back contineous arms and supply and fix new seat and back 12mm thick hot pressed ply wood, upholstered with fabric and moulded polyurethane foam with PVC lipping all around to them complete all as drawing No and all as directed by Engineer-in-Charge.

(d) Supply and fix in repairs new bottom gas lift (Hydraulic) with pouch of size 38mm dia and 2mm thick for revolving chairs and computer chairs. It shall have 100mm stroke length and gas pressure of 300n force. Note : Adjustable tilting mechanism to be designed with the following mechanism- Forward tilt self regulating tilt tension+manual override, 4 position tilt lock. Anti shock back mechanism to prevent back rest from hiting the user when the lock released . 360 swivel mechanism to allow fluid lateral movement all as directed by Engineer-in-Charge.

(e) Removing the existing broken twin caster wheel from revolving chairs, computer chairs, etc and supply and fix new fibre caster wheel ll as directed by Engineer-in-Charge.

(f) Supply & Fix in repairs new pedestal assembly injection moulded in black 30% glass filled nylone A 10.5mm dia forged bright zinc plated MS caster pin is of press fitted in to each prong holding the castors. It is 600mm pitch-centre dia from revolving chairs & computer chairs, all as directed by Engineer-in-Charge.

Double bunk charpoy steel CWE/FD/4 ( R ) Removing unserviceable plywood and Supply & fix in repairs 12mm thick (7 ply) ply wood top of size 1950mm x 900mm (single piece) BWR, type 'BB' Grade bearing ISI Mark of Double bunk charpoy with plywood top suitable size of MS screws as specified all as shown on drg and as directed by Eng-in-Charge.

Locker steel FD 1029 (a) Removing of unserviceable worn out legs of Locker steel and providing with new legs fabricated out of 1mm thick MS Sheet made to shape and size and fixed in position by means of welding all as per Drg No FD-1029 including painting the new steel surface by applying two coats of first quality synthetic enamel paint olive green by spray painting over a coat of Red Oxide Primer after necessary preparation of surface all as directed by Engineer-in-Charge.

(b) Removing of unserviceable Hasp and stapple of Locker steel and providing with new hasp and stapple 100mm all as per Drg No FD-1029 all as directed by Engineer-in-Charge.

(c) Removing of unserviceable Handle of Locker steel and providing with new Handle 125 mm all as per Drg No FD-1029 all as directed by Engineer-in-Charge.

Table Bed side drawing No FD/E6/MAP15(R) (a) Removing of UNSV top from table bed side and suply and fixing new top made out of 18mm thick prelaminated particle board including teak wood, 4mm thick edging alround the table top fixed to frame all as shown on drawing and all as directed by Engineer-in-Charge.

(b) Removing of UNSV side from table bed side and supply and fixing new side made out of 18mm thick prelaminated particle board fixed to frame with suitable size of screws all as shown on drawing and all as directed by Engineer-in-Charge

(b) Removing of UNSV back ply from table bed side and supply and fixing new back made out of 8mm thick plywood BWR, type 'BB' fixed to frame with suitable size of screws all as shown on drawing and all as directed by Engineer-in-Charge

(c) Removing of UNSV drawers from table bed side and supply and fixing new drawer made out of 18mm thick prelaminated particle board all as shown on drawinng and as directed by Engineer-in-Charge.

(d) Removing of unsv handle from table bed side and supply and fixing new handle of size 100mm long M S all as shown on drawinng and as directed by Engineer-in-Charge.

Table Office Clk/Office Officer steel Fd- 84/1002/1003/1004/1008/1009 (a) Removing of old unserviceable table top of table office clerk steel and supply and fixing new 19/20mm thick pre laminated particle board of exterior grade with top face of table with decorative teak wood shade lamination and other side with balancing white lamination including 6mm x 19 mm teak wood edging alround table top fixed as per drg No FD-84/FD-1004 and as directed by Engineer-in-Charge.

(b) Removing of old unserviceable table top of table office officer steel and supply and fixing new 19/20mm thick pre laminated particle board of exterior grade with top face of table with decorative teak wood shade lamination and other side with balancing white lamination including 6mm x 19mm teak wood edging alround table top fixed as per drg No FD-1003 and as directed by Engineer-in-Charge.

(c) Removing of old unserviceable table top of size 900mm x 900mm x 760mm and supply and fixing new 19/20mm thick pre laminated particle board of exterior grade with top face of table with decorative teak wood shade lamination and other side with balancing white lamination including 6mm x 19mm teak wood edging alround table top fixed as per drg No FD-1009 and as directed by Engineer-in-Charge.

(d) Removing of old unserviceable table top of size 900mm x 600mm x 760mm and supply and fixing new 19/20mm thick pre laminated particle board of exterior grade with top face of table with decorative teak wood shade lamination and other side with balancing white lamination including 6mm x 19mm teak wood edging alround table top fixed as per drg No FD-1008 and as directed by Engineer-in-Charge.

(c) Supply and fixing legs of various Tables mentioned above with MS 25mm Square tube 1.6mm thick 760mm long fixed by means of continuous welding to rails of Table to suit with the existing components including painting the entire new exposed steel surface with two coats of synthetic enamel paint over a coat of zinc chromate primer complete including rubber shoes made of superior quality all as per drawing and as directed by Engineer-in-Charge.

(e) Removing of old unserviceable drawers from table office clerk steel and supply and fixing new drawer steel made out of 1mm thick MS sheet bent to shape & made to size all as per Drg No FD-84/ FD-1004 including lock & painting the new steel surface with two coats of first quality synthetic enamel paint olive green by spray painting over a coat of Red Oxide Primer after necessary preparation of surface complete all as directed by Engineer-in-Charge.

Table dining ORs FD - 165 (a) Supply and fixing table top of Table Dining OR's with 18mm thick pre-laminated particle board natural teak shade size of 1830 x 680mm with 6mm thick Teak wood edging all as specified and shown on drawing including two coats of French polish to teak wood beading complete all as directed by Engineer-in-Charge.

(b) Supply and fixing for table top in repairs of Table Dining OR's with 18mm thick block board of size 1830mm x 680mm including covering the top surface of board with 22 guage Aluminium sheet cut to size fitted & fixed with MS Screws all as specified and shown on drawing and all as directed by Engineer-in-Charge.

(c) Supply and fixing legs of Table Dining OR's with MS 25mm Square tube 1.6mm thick 760mm long fixed by means of continuous welding to stifferners of Table Dining OR's to suit with the existing components including painting the entire new exposed steel surface with two coats of synthetic enamel paint over a coat of zinc chromate primer complete including rubber shoes made of superior quality all as per drawing and as directed by Engineer-in-Charge.

(d) Supply and fixing Long stiffener in repairs of Table Dining OR's MS 25mm square tube, 1.6mm thick 1600mm long fixed by means of continuous welding to legs/short stiffener to match with the existing components including painting the entire exposed steel surface with one coat of first quality synthetic enamel paint over a coat of zinc chromate primer complete all as per drawing and as directed by Engineer-in-Charge.

(e) Replacing the unserviceable Short stiffener in repairs of Table Dining OR's to size and shape using retrieved material obtained from item No 6(d) above and welding to legs/long stifferners to match with the existing component including painting the exposed steel surface with two coats of first quality synthetic enamel paint complete all as drawing and directed by Engineer-in-Charge.

(f) Removing the UNSV PVC Shoes from Table Dining OR's Supply and fix new PVC shoes fixed to bottom of legs as specified all as shown on drg and as directed by Eng-in-Charge.

Rack Steel Six tier (a) Dismantling carefully and taking out the old unservicerable/damaged shelf of Rack steel six tier and supply and fixing of new shelf made out of MS sheet 1mm thick bent to shape and fixing the same properly in position all as per Drg including applying two coats of first quality synthetic enamel paint olive green by spray painting over a coat of Red Oxide Primer after necessary preparation of surface complete all as directed by Engineer-in-Charge.

Teapoy verandah FD-255/383 (a) Removing the damaged/unserviceable top in repairs of teapoy verandah & replacing the same by providing new top made out of 18mm thick pre laminated particle board white colour shade of size 900mm x 450mm x 18mm with 4mm thick teak wood edging all around and applying two coats of French Polish to teak wood beading after preparation of surface complete and all steel and iron surface shall be painted with two coats of white enamel paint over a coat of primer and provide suitable PVC shoes be fixed to the legs and all as directred by engineer-in-Charge.

Materials and labour for painting of following steel furniture including welding where ever necessary and duly preparing the surfaces by sand papering and remove the stains and applying a coat of 1st quality synthetic enamel paint of approved colour all as specified and directed by Engr-in-charge (a) Almirah large steel FD-1031

(b) Almirah meduim steel with shelves FD-1032

(c) Locker steel FD-1029

(d) Book case steel FD-1028

(e) Bed steel Hard top FD/E6/MAP/08 ( R)

(f) Double bunk charpoy steel CWE-FD 04

(g) Rack side 3 spaces steel FD-1023

(h) Rack side 4 spaces steel FD-1023

(j) Table steel 900x 600x 760mm with out drawer FD-1007

(k) Table office clerk steel FD-1004

(l) Table office offr steel FD-1003

(m) Table steel 900x 900x 760mm FD-1009

(n) Table steel 900 x 600x 760mm with drawer FD-1008

(o) Charpoy Jco's steel CECZ/ FD/726

(p) Charpoy steel plywood top CWE/FD/77 (R )

(q) Teapoy varandah FD-255/383

(r) Table dining OR FD-165

(s) Stool Steel 305x305x760mm FD-81

(t) Rack steel six tier FD-1038 Note: For Item No 51 to 68 The painting specifications are same as item No 50 here in above

PRIYADARSHINI CONSTRUCTIONS

Vivek Engineers