Repair and Renovation of civil works at Karaikal sites CWC

Amount

Repair & Rehabilitation of Wearing Course at Site Thengudi under CDSD, CWC, Karaikal

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm

Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner.

Repair & Renovation of Doors & Windows at Annavasal site office undrer CDSD, CWC, Karaikal

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc, complete and stacking within 50meters lead: of area 3sq.metres and below

uPVC extruded (small series) 3 track sliding window frame size 92x44 mm

uPVC extruded (small series) 3 track sliding window sash/3 track sliding window sash size 32x60mm

uPVC extruded glazing bead of appropriate dimension for big series of sliding window/ door sash

EPDM Gasket for uPVC window

Float glass panes of nominal thickness 5 mm (weight not less than 12.50 kg/sqm)

Labour for fabrication of uPVC extruded casement/sliding windows and doors including drilling holes, fixing of fittings & hardwares, hire charges of drill machine and electricity charges etc.

Labour for installation of uPVC extruded casement/sliding windows and doors including scaffolding

P/F 1mm thick MS sheet door with frame of 40x40x6mm angle iron & 3mm gusset plates at the junctions & corners all necessary fittings complete i/c applying a priming coat of approved steel primer. Using MS angles 40x40x6mm for diagonal broses.

Repair & Renovation of Fencing Works at site office Porakudi under CDSD, CWC, Karaikal

Dismantling barbed wire or flexible wire rope in fencing including making rolls and stacking within 50 metres lead.

Supply and Fixing of Granite Fencing pole for 7' spacing and support pole i) 7 feet pole

Supply and Fixing of Granite Fencing pole for 7' spacing and support pole ii) 6 feet pole

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. Made of G.I. wire of dia 4 mm

Renovation of GUEST ROOM of Cauvery Delta Sub Division, CWC, Karaikal

Dismantling tile work in floors laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm

Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding, and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in- Charge. In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand Acid and alkali resistant tile

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. W.C. pan with ISI marked white solid plastic seat and lid

S.T.S.CONSTRUCTIONS AGENGICS

Arche Constructions