Tender for the Work of supply and laying of 11 kV Class Aerial Bunch (AB) Cable from Stage 1 Pumping Station to Stage 1 & 2 Old WTP & Stage 2 Pumping Station to Stage 3 WTP of T K Halli under jurisdiction of AEE(K-O&M)-1-2 sub-division.

Tender for the Work of supply and laying of 11 kV Class Aerial Bunch (AB) Cable from Stage 1 Pumping Station to Stage 1 & 2 Old WTP & Stage 2 Pumping Station to Stage 3 WTP of T K Halli under jurisdiction of AEE(K-O&M)-1-2 sub-division.

Pre-Stressed Tubular Spun Pole - 11 Mtr Long, 500 Kg WL

Erection of 11 Mtr Long Concrete Spun Pole in a pit of 2.5 Mtr depth (Mechnised Labour)

PSCC Pole - 9 Mtr Long, 200 Kg WL

Erection of RCC/PSCC Pole of 9 to 10 Mtr long in a pit of 1.8 Mtr depth

11 kV [6.35/11 kV(E)], HT Aerial Bunched Cable XLPE insulation confirming to IS-14255: 1995

3x95 + 1x70 Sqmm (Insulated Messenger Wire)

Labour charges for Stringing of 11 kV grade Aerial Bunched 3 Core cable of XLPE insulation of size 3x95 Sqmm + 1x70 Sqmm with Insulated Messenger Wire

11 kV, ABC Termination kit 95 - 120 Sqmm

Labour charges for 11 kV AB Cable Termination installation for 3 Core

Suspension Clamp suitable for insulated Messsenger wire of size 25 to 95 Sqmm

Erection of Suspension Clamp - 25 to 95 Sqmm insulated messenger with bracket

Universal Hook and Bolt & Nut

Fixing of Universal Hook

Dead End Clamp / Anchor Clamp Assembly 25 to 95 Sqmm Bare Messenger (Exclusive of Pole Clamp and Eye Hook)

Erection of Anchor Clamp - 25 to 95 Sqmm bare messenger

Nylon Cable Tie (100 Nos)

Pole Clamp for HT/LT AB cable

Labour charges for Pole Clamp-145 mm x 95

Eye Hook (Flat Type) for fixing Clamp

GOS as per IS-9921, IS-1977

11 kV, 200 Amps Single Break GOS, Vertically Operated

Fixing of GOS including wiring (11 kV Single Break 200 Amps)

H - Frame Set for fixing 11 kV, 200 Amps Single Break GOS - (For DP structure for providing New GOS for sectionalisation) - MS

Erection of H-Frame

9 kV, 5 kA Lightning Arrester Metal Oxide Ceramic type with GROUND DISCONNECTOR

Fixing of 3 Nos Lightning Arrestor including wiring

Digging of Pit 1.8 Mtr depth for errection of 9 to 10 Mtr Long Steel/RCC/PSCC supports as per approved Drawing.

Digging of Pit 2.5 Mtr depth for errection of 11 Mtr Long Tubular Spun pole as per approved Drawing. Ordinary Soil

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

B) Pole Concreting with CC 1:2:4 (without coping)

a) 9 Mtr support

c) Transformer Foundation Coping

Rod Type Earthing:

Rod type of earthing using 40 mm Dia, 3 Mtr long MS rod as ground rod, in earth pit of 300 mm width and 3300 mm depth and using 50x6 mm flat welded to ground rod as terminal & conne...

Bentonite clay slurry for earthing in 50 Kg Bag

Supplying & providing 450 mm dia 450 mm height 1.5" to 2" thick hume pipe collar (non pressure type) for earth pits including all lead and lifts etc.,

Guy Set Complete with No. 15 Strain Insulator & Concreting materials (Material)

Guy Set Complete with No. 15 Strain Insulator & Concreting materials (Labour)

Guy concreting with Boulders, Mud and Sand

Releasing of AB Cable

Any Dismantling work

90% of the corresponding erection charges.

Releasing of RCC Pole

Any Dismantling work

90% of the corresponding erection charges.

11 kV, 3 Core, XPLE HTUG Cable with pressure extruded inner sheeth, ROUND WIRE ARMOURED as per IS-7098 (Part-2) Armouring wires dia and Resistivity as per IS-3975

95 Sqmm, (54 GI Wires - 2.5 mm Dia)

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers asdirected by the departmental staff

3x95 to 150 Sqmm

11 kV, Jointing & Cable Termination Kit as per IS-13573

Heat Shrinkable Outdoor Type Cable Termination Kit for XLPE Cable

Heat Shrinkable Indoor Type Cable Termination Kit for XLPE Cable

Making and Fixing of Pot Head for HT Cable Only

Heat Shrinkable type Terminations

3x95 to 3x150 Sq.mm

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers asdirected by the departmental staff

120 to 240 Sqmm

Epoxy Terminating Kit (Pothead) suitable for 1.1 kV, LTUG Cable

Making and Fixing of Pot Head for LT Cable Only

Heat Shrinkable type Terminations

120 to 240 Sq.mm

For Transformer Foundation:

Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in a...

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)

GI Medium Duty pipes 100mm dia