SPECIAL REPAIR OF BER CHLORINATION PLANT AT 2 ASD (17 FAD) KASUBEGU, SPL REPAIR TO TOILETS BLOCK BLDG NO. ET-2 D (10 X OTHER RANKS TOILETS) NEAR MED INSP ROOM OF MECH INF (RECCE AND SP (WH) AND CERTAIN MINOR WORK OF B/R UNDER GE (EAST ) FZR CANTT

Amount

B/R Works Taking down chowkats with shutter (without taking off shutter) from the frame, exc 1.5 Sqm n exc 4 Sqm each complete all as specified and directed.

All as per item above herein before but size not exc. exceeding 1.5 Square each complete all as specified and directed

M & L factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.

M & L factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading, and jointed together with solvent cement, supply & fixing in the frame at site as per specification and drawing in SSR complete all as specified and directed.

S&F for PTMT tower bolts, 200 mm long and fixed with steel screws complete all as specified and directed.

S&F for PTMT butt hinge, 100mm long, fixed with steel screws with brass/bronze hinge pin complete all as specified and directed.

S&F for PTMT handle 125mm long fixed with steel screws complete all as specified and directed.

S&F Factory made box type steel ventilator with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and directed.

S&F 3mm thick, plain sheet glass ordinary quality and glazing, with oil putty or with wooden beads (supplied alongwith shutters), in squares n.exc 0.50 Sqm complete all as specified and directed.

Dismantling floor ,hearth or wall tiling including cement morter beddind (but not backing removing seviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for Glazed ceramic coloured (colour & shade as approved) tiles non skid of size 300x300x7mm thick as in floor set and jointed in neat cement slurry over and including 15mm thick screed in cement mortar (1:6) and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed.

M&L for Glazed ceramic tiles, coloured (lcolour as approved), of size 300x200x7mm thick on vertical surfaces such as in skirting/dado etc set and jointed in cement slurry over and including 10mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed.

Taking up or down existing steel water tubing, 15mm bore alongwith connections fixed/laid in any situation, complete all as specified and directed

Taking up or down existing steel water tubing, 20mm bore alongwith connections fixed/laid in any situation, complete all as specified and directed

S&F Galvanised iron steel water tubing, 15mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floors complete all as specified and directed

S&F Galvanised iron steel water tubing, 20mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floors complete all as specified and directed

Fixing only, after cleaning old steel water tubing, 15mm bore and connections in new or old position using new fittings complete all as specified and directed (Note:- serviceable tubing retreived from item No 13 shall be reused)

Fixing only, after cleaning old steel water tubing, 20mm bore and connections in new or old position using new fittings complete all as specified and directed (Note:- serviceable tubing retreived from item No 14 shall be reused)

S&F PVC low level flushing cistern (white) of 10 liters capacity with inlet ball float valve, PVC flush pipe and necessary fixing arrangements and connecting to water pipe and WC etc and fixed in repairs complete all as specified and directed

S&F 500 litres capacity rotational moulded, triple layer polythene water storage tanks tripple layer (cylindrical vertical with closed top) hoisting and fixed in position on roofs including fittings & dismantling existing water storage tank, complete all as specified and directed

Disconnectingt existing tanks, setting a side (or lowering if required) for repairs, cleaning, etc.capacity exc.250 but n. exc. 500 ltr and hositing if required reconnecting and re-fixing in position. (Cleaning repairing etc. measured separately) complete all as specified and directed.

S&F 20mm bore PTMT ball valve high pressure with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified and directed.

S&F in repair Bib tap of CP brass, 15mm bore, fency type screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F Vitreous china white squatting pan orrissa pattern of size 580mm x 440 mm with integral foot rests including necessary lime concrete and 100 mm bore cast iron ‘P’ or 'S' trap with 550 to 600 mm long neck for connecting WC to branch piece with cement joints, fixed as in repair, complete all as specified and directed.

S&F in repair Viterous China wash down water closet pan (pedestal pattern), white incl. Seat and cover and jet sprey (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed

S&F in repair stop cock 15 mm cast copper alloy screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe etc. complete all as specified and directed.

S&F in Wash hand basin, flat back 550x400mm vitreous china (white) including PTMT waste fittings, 32mm bore size, waste pipe, PVC, 32mm bore, angle iron/cast iron brackets of required size as directed & making good disturbed surfaces to match with the existing as in repair complete all as specified and directed.

S&F in repair 15mm bore pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed.

S&F Low density polythene pipe (LDPE) of pressure rating 6 Kg per Sq.cm, 450mm long, heavy duty with two sets of brass nuts & washers (one at each end)etc suitable for 15mm bore of pipe complete all as specified and directed.

Dismantling CI pipe alongwith fittings of 75/100mm dia, below or above ground level or laid in floors, jointed in cement mortar and taking out complete all as specified and directed.

S&F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls including distance pieces and stack clamps as in rain water pipes as complete all as specified and directed

S&F 75 mm bore PVC (SWR) vent Cowl complete all as specified and directed.

Demolition of brick work or stone/boulder masonary built in cement mortor including all quoins,arches,pillars etc, complete all as complete all as specified and directed

M&L for Brickwork with sub-class `B' brick straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed

Taking down cement plaster on brick walls of any description including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed

M&L for Rendering/plastering, 15 mm thick in cement mortar (1:4) on brick or concrete surfaces, surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar (1:6) on any face of brick walls or concrete surfaces, finished fair and even complete all as specified and directed

M&L for Preparation of new plastered wall surfaces and applying two coats of cement base paint complete all as specified and directed.

M&L for Preparation of old decorated surface of wall and applying one coat of cement based paint including corneces, pillars etc complete all as specified and directed.

M&L for Preparation of old decorated surfaces on ceiling and applying one coat of white lime wash including cornice and pillars etc complete all as specified.

Preparation of old decorated surfaces of wall and applying one coat of white lime wash (white washing) on walls including corneces, pillars complete all as specified and directed.

M&L for Preparation of newly plastered surfaces of walls & applying two coats of white wash complete all as specified.

Surface dressing n exc 15 cm deep and getting out soft/ loose soil complete all as specified and directed.

M&L for Hardcore of broken bricks gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for 50mm thick cement concrete type D-2 (1:4:8) using 40 mm graded crushed stone agg. as in sub base of path / floor complete all as specified and directed

M&L for 40 mm thick PCC (1:2:4) type B-1 using 20 mm graded crushed stone agg.as in floor, surface finished even and smooth without using extra cement complete all as specified and directed.

Excavation in trenches in soft/loose soil not exceeding 1.5 metre wide and not exceeding 1.5 metre depth for foundation etc or for shafts, wells, cesspits, manholes etc n exc 10 sqm on plan and n exc 1.5m depth and getting out complete all as specified and directed.

M&L Plain cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation filling as mass concrete or in sub base of floors complete all as specified and directed.

Returning filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm complete all as specified and directed.

Removal of surplus soil to a distance not exc 50 metre and depositing where directed at a level not exc 1.5 metre above the starting point complete all as specified and directed.

M&L brick work with sub class 'B' bricks, straight or curved on plan exceeding 6 mtr mean radius built in CM (1:6) complete all as specified and directed.

S&F stop cock 15 mm cast copper alloy screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe etc. complete all as specified and directed

S&F 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. (fitting measured separately).

S&F 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent including jointing to waste pipe in run lead complete all as specified and directed.

S&F 75 mm bore PVC (SWR) bends any radius complete all as specified and directed.

M & L Cement concrete (1:2:4), type B-1 using 20mm graded stone aggregate as in bed block of hold fast, coping complete all as specified and directed.

S & F Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates,rivetting, etc., n exc 10 kg each brackets, conforming to FE 410-0 or FE 310-0 complete all as specified and directed

S&F Mild steel, plain black sheet 0.63mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed.

M&L for Preparation of new steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.

M&L for Providing precast cement concrete louvres and jallies, 25mm thick type B0 1:2:4 (12.5mm graded aggregate) (measured solid), Set in cement mortar 1:4 including all mouldings but excluding frame complete all as specified and directed.

M&L 150m dia SGSW drain pipes laid in trenches and jointed complete all as specified and directed.

M&L PCC 1:3:6 type D-2 as in concrete bed to drain pipes including packing under and haunching against the sides of pipes afrter they are laid and tested in 150 mm bore pipe compete all as specified and directed

M&L for providing precast cement concrete type B-1,1:2:4 in manhole cover including necessaryh form work excluding reinforcement and set in CM 1:4 complete all as specified and directed

M&L PCC in surface channels and drains type B1 (1:2:4) using 20 mm graded stone aggregate complete all as specified and directed

M&L Mild steel TMT bars 6mm to 8mm dia,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified and directed

Cutting into existing manhole for connecting new drain pipe (150mm dia),making good to pipe and rendering, cutting out existing benching for and forming brench chennel in cement concrete 1:2:4 type B-1 smooth finished etc. complete all as specified and directed

M&L for 10 users septic tank of size (2.00X0.90m) Excavation & earth work d in ordinary soil, foundation in PCC 1:2:4, brick work in CM 1:4 , RCC slab covers including RCC precast manholes cover having 6mm plate embedded all round/ fibre reinforced cover with angle iron frame , vent shaft and sludge chambers etc complete all as specified and shown on drg.

M&L for 10 users Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonary with top ring of concrete 1:2:4 including intercepting chamber and screen chamber made of brick masonary in CM , RCC over slab in cement concrte 1:2:4/ SFRC cover, interconnecting pipes of RCC/DWC Complete filled with brick bats of size 1.2m x 1.5m effective depth. complete all as specified and shown on drg.

E/M Works Supply, installation and testing of Heavy duty Chemical Dosing system plunger type suitable to inject solution upto 25 LPH working pressure 10 kg /cm2 comprising dosing pump coupled with three phase electric motor of capacity 0.5 HP,1440 RPM assembly with agitator in one motor , agitator with SS sweep blade duly FRP coated, FRP tank 150 ltrs capacity, complete unit mounted on heavy duty MS fabricated frame duly anticorrosive paint complete with Chemical grade PVC NRV including inlet /outlet check valve all connections ,connecting CPVC/UPVC/PVC Fittings ,Pipe etc all as required at site and directed. Make:- ION EXCHANGE, MAIC INDIA, JESCO, SATHYA SAI AQUA PURA SERVICES

S&F of Flat 2.5 Sqmm Three Core PVC insulated & PVC sheathed copper conductor in PVC Conduit, industrial cable for Dozing System/submerssible pump motors 1100 volts confirming to IS 694 complete all as specified.

Supply and fixing single pole and neutral enclosure with a two pin and earth plug and socket complete with one triple pole MCB of 32 Amps complete all as specified and directed.

Taking down carefully existig copper/ alumn point wiring for light/ fan/ bell/ socket 5/ 15 Amp points complete with fitting and fixtures such as switches, sockets, Ceiling Rose, holders and bracket fittings with battens/ conduits/ wires, T/L fittings and making good the disturbed surfaces of walls and roofs etc. and to match with existing colour complete all as specified and directed.

Taking down carefully unserviceable main switches and distribution boards with fuses/ MCB's (single phase or three phase) of any capacity all as specified and directed.

S&F Point wiring complete with 1100 volts grade PVC FRLS insulated unsheathed cable of copper conductor, multi stranded of size 1.5 Sqmm, single core, drawn through & including PVC rigid concealed conduit, medium grade of suitable size (not less than 20mm dia) duly ISI marked with all accessories such as bends, reducers, spacers, saddles, junction boxes, bakelite sheets, sizes for mounting switch/ sockets, fan regulators etc complete with and including continuous earth wire of size 1.5 Sqmm, single core, PVC FRLS copper conductor, insulated, unsheathed, stranded (Green colour) connected to common earth dolly complete all as specified for following : (a) One light/ Exhaust fan/ Bldg security light point controlled by one single pole one way switch. ( Note: wiring shall be done in colour coding)

S&F 6 amps, single pole, one way switch urea back piece (IP20), 240V, 50Hz, white in colour, duly ISI marked complete all as specified and directed.

S&F Ceiling rose surface type, 240 volts, 50 Hz, 6A, Pilot 3 plate, white in colour, bakelite 65 x 50mm, 3 terminals duly ISI marked complete all as specified and directed.

S&F batten holder (with metal ring), 240 volts, 50 Hz, 6A, white in colour, duly ISI marked complete all as specified and directed.

Supply and fixing LED light fitting 1 x 20 Watt, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F LED bulb of 9 watt, B22, 6500K all as specified and directed.

S&F LED sleeky bldg street light (Lens) fitting of 35 watts, 6000K, including GI bracket bend to shape made out of GI pipe light grade of 25 mm, size up to 1.2 mtr long etc complete with MS clamps made of 25x3mm MS plate, duly painted with two coats of aluminium paint with nuts/ bolts/ washers and all fixing arrangements to wall/ pole, including connecting up with 2 core copper flexible wire of size 23/00.0076 all as specified and directed.

S&F Factory made single phase and neutral Sheet Steel made out of CRCA 1.2 mm thick, powder coated double door vertical distribution board 8 way, dust and vermin proof, fitted with two cover, one screwed cover for incoming and outgoing MCBs and the second for protection of MCBs fitted with colour bus bar of capacity 200 Amps, neutral link, earth bar and din rail. suitable for use on 240V, 50Hz supply, partly immersed in wall and making good distrubbed surfaces with matching colour, complete all as specified.

S&F MCB SPN, 40A - 63Amps, 240 volts, "C" series, 10KA duly ISI marked, in MCB DB, complete with connection testing and commissioning all as specified.

S&F MCB SP, 6A-32 Amps, 240 volts, "B" series, 10KA duly ISI marked, in the MCB DB, complete with connection testing and commissioning all as specified.

S&F exhaust fan heavy duty with louvers complete of sweep size 300mm, 900 RPM, single phase, with bolts, nuts and washers, size of the bolt 15 cm long 12mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/00.0076 three core from ceiling rose to exhaust fan max 1.5 mtr for giving connection complete all as specified and directed.

Cutting holes making good the distributed surface, grouting nuts for fixing of Exhaust fans complete all as specified and directed.

M & L for Earthing complete with galvanized steel plate elecrode of size 60 cm x 60cm x 6.3 mm thick burried directly in ground vertically to a depth not less than 2.5 mtr below the ground level with top edge of earth plate at a depth not less than 1.5 mtr below ground level. Earth plate surrounded by 15mm thick packed alternative layers of charcoal dust and comman salt, earth lead GI wire of 4mm dia (8 SWG) by means of bolts , nuts, check nuts and washers of galvanised iron with thimbles. The other end of GI earth wire is connected to main switch board and protected by light grade GI pipe of 15 mm bore. provision of 20mm bore light grade GI pipe for watering including GI funnel and wire mesh. Pipe shallbe provided vertically upto top level of earth pit and then taken horrizontally to the earth pit. Cement concrete chamber of PCC (1:3:6) type C-2 using 40 mm graded stone aggregate.The chamber shall be constructed one metre away from edge of earth pit. 50 mm thick pre cast cover of cement conrete (1:2:4) type B-1 using 20 mm graded stone aggregate and MS angle iron 50 x 50 x 6 mm frame including two coats of painting over a red oxide to exposed steel surfaces. excavation in soft/ loose soil, returning filling and removal of surplus soil to a distance of 50 mm as directed and shown in Electrical Plate No- 3 of SSR Part-1 (2009).

M & L for Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/ pipe or fixed to poles or any other indicated situation for loop earthing etc as required 4 mm dia galvanised iron or steel wire complete all as specified and directed.

M&L for cutting of existing GI tubing 40mm dia for making new conncetion, inserting un equal Tee 40X40X25mm dia including excavation, returning filling complete and all as directed and specified.

Supply and laying GI tubing medium grade galvanised of size 25mm bore laid on floor/ ceiling including all fittings and short pieces complete all as directed by Engineer-in-Charge.

Supply and fix Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed of 25mm bore complete all as specified.

S&F XLPE insulated, armoured, 1100 volts grade, heavy duty cable of size 10 Sqmm nominal cross section, 2 core, aluminium conductor, served with inner sheathing of galvanized steel wire or tape and over-all PVC sheathed in service connections, laid in trenches, duct, through pipe, in floor, on pole including jointing with double compression copper stain less steel gland at DBs and testing, complete all as specified. (Note: Excavation & earth work, brick protection, sand cushion shall be measured and paid separately).

M&L Dry and clean fine sand for cable cushioning to underground cable protection, complete all as specified. Note- Punned down thickness shall be measured.

S&F Cover to underground cable with one layer of bricks using sub class ‘B’ bricks (old size) laid flat across the cable complete all as specified. (Excavation and earth work measured separately).

S&F Mild steel galvanised pipe, light grade, 40 mm nominal bore for passing of cable, fixed to poles/walls, laid under floor/road crossings, complete with and including clamps socket & elbow etc complete all as specified.

JAWAHAR CONSTRUCTION COMPANY

Brar Enterprises

CHETAK CONSTRUCTION COMPANY