PWD/BWN/Rs.4.65 lacs/Special repair of ICU Block in the campus of Civil Hospital at Bhiwani in Bhiwani Distt.

Amount

Scrapping white wash and colour wash (HSR 8.32 (A)

Scraping of old Cement Plaster HSR(8.32( C)

Dismantling concrete plain CC 1:2:4 (8.6(d)

Cement Concrete 1:11/2 with stone aggregate 20mm nominal size in first storey upto 4 meters above plinth level (HSR 10.60)

12 mm thick cement plaster 1:4 HSR(15.5)

Dismantling white or coloured glazed tiles (to be carefully removed) (8.38)

Providing and fixing Ist quality ceramic glazed wall tiles confirming to I.S. 15622(thickness to be specified by the manufacturer) of approved make in all colours shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting risers of steps and dados over 23mm thick bed of cement mortar 1:3 coarse and jointed with grey cement slurry, including pointing in white cement mixed with pigment to matching shades complete-Size of ceramic Glazed tiles 300mmx450mm (HSR 14.92(b)

Providing and fixing rectified ceramic anti skid tiles of size 400x400mm of approved make in floors laid in any pattern as specified over base of 20mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade of tiles. (Tiles shall be supplied by the department) brands like RAK, NITCO, KAJARIA, (as approved by the Engineer in charge) (HSR 14.91)

Providing and applying two coats white cement based putty over plastered surface and grinding the surface smooth with sand paper to get an even and smooth finish including cost and carriage of all material, labour charges, scaffolding, sundries etc. complete. (Note:- reputed make Putty such as J.K./ Birla shall be used as approved by Engineer-in-charge). (HSR 16.81)

Painting two coats with plastic emulsion paint on walls on new work to give an even shade (HSR 16.30)

Providing and fixing False Ceiling with grooves with 12mm to 15mm thick, 600mm x 600mm best quality mineral fibre tiles tiles of approved make fixed on M.S. Steel runners frame i/c cost of screws angles, cleats, rawel plugs, with taping and painting etc. complete in all respects as approved by the Engineer-in-Charge. HSR(13.93).

Cement concrete 1:11/2:3 with stone aggregate 20 mm nominal size for reinforced concrete work in slabs with inclination not exceeding 25 degree with horizontal, excluding steel reinforcement, but including centring and shuttering, laid in position, complete in all respects. (HSR 10.82 + 10.95 (a)

Fe-500 EQR TMT steel bar for RCC work, where not included in the complete rate of RCC including bending, binding & placing in the position complete (HSR 18.22)

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE (ORDINARY) LAVATORY SUITES consisting of Lavatory in VITREOUS CHINAWARE size as give below ( to the approval of the Engineerin- charge) including china plug for tap hole where necessary ; R.S. or C.I.BRACKETS for building into wall including painting; 32mm C.P.BRASS WASTE WITH C.P. brass chain and rubber plug; 15mm C.P.BRASS SCREW DOWN PILLAR TAP WITH jam nuts or couplings best design (as approved by the Engineer-in-charge) ALL FITTINGS BEST INDIAN MAKE and; to the approval of the Engineer-in-charge. ALL brass work chromium plated and COMPLETE in all respects INCLUDING cutting and MAKING GOOD THE WALLS, FLOORS AND PAINTING OF FITTINGS ETC. (HSR 30.41(III)

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE BEVELLED EDGE 5.5 MM THICK MIRROR mounted on ASBESTOS sheet GROUND FIXED IN POSITION BY MEANS OF 4 NOS. CHORMIUM PLATED BRASS SCREWS AND WASHERS over rubber washers and rawl plug embedded in the wall of chromium plated brass clamps with C.P. brass screws (as required by the Engineer-in-charge) COMPLETE INCLUDING CUTTING AND MAKING GOOD THE WALLS ETC. INDIAN MAKE (i) 600mm X 450mm (HSR 30.71 A I)

Providing and fixing PVC Rain Water pipe 6 kg. pressure of ISI Mark in Cement mortar during masonry work. 100mm dia pvc pipe 6 kg. presure. HSR(13.89(a)

Anil Kumar Contractor

THE BAMLA HARIJAN CO-OP L and C SOCIETY LTD.