Construction of continue work grama panchayath in Hiregonigere Honnali taluk Davanagere

Construction of continue work grama panchayath in Hiregonigere Honnali taluk Davanagere

12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, madeof Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16mm thick fire re...

Providing and supplying cupboard shutter with 18mm thick one side Architect recommended decorative laminate (1mm thick) and other side balancing lamination (preferably white) HDHMR BOARD of approved b...

Providing and fixing 2mm thick 16 to 19mm wide PVC edge binding tape of approved quality for cupboard/wardrobe/kitchen shutters including necessary synthetic resin hot pressed to edges on binding mach...

Providing and fixing Stainless Steel SS Handles 200mm conforming to 304 graded steel as per direction of engineer in charge [P.No- 218, SI.No-22.15.1] (PWD SR 2023-24) Volume-Wardrobe / Loft Handles

Providing and fixing Stainless SteelSS Tower Bolts 150x10mm 200mm conforming to 304 graded steel as per direction of engineer in charge [P.No- 218, SI.No-22.15.5] (PWD SR 2023-24) Volume-2

Providing and fixing Stainless SteelS SS hinges 125 mm conforming to 304 graded steel as per direction of engineer in charge [P.No- 218, SI.No-22.15.8] (PWD SR 2023-24) Volume-2

SS hinges 125 ...

Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. [P.No- 105, SI.No-12.60] (PW...

Providing and fixing of Aluminium composite panel For Straight Portion of approved make and colour for wall cladding for Brick Rcc stone walls & coloumns beams with necessary aluminium frame works at ...

Providing and fixing 18 mm thick gang saw cut granite Area of slab over 0.50 m2 of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters,...

Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge.(P.N...

Providing and fixing Stainless Steel a ISI kitchen sink mm bowl depth 250 mm as per is with C I brackets and stainless steel plug 40 mm including painting of fittings and brackets cutting and making g...

Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long bracket...

Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Pr...

Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround doo...

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a primi...

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel...

Providing and laying 60mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Cycle Tracks & Pedestrian Footpaths of approved shape and colour, laid...

Construction of cement concrete kerb with channel with top and bottom width 115 and 165 mm respectively, 250 mm high in M 20 grade PCC on M10 grade foundation 150 mm thick, kerb channel 300 mm wide, 5...

Earth work excavation for Foundation by mechanical means for allworks& depth upto 3 m, as per drawing and technicalspecifications,including setting out,shoring, strutting, barricading, caution lights,...

Providing and laying in position plain cement concrete for levellingcourse for all works in foundation. Thegranite/trap/basaltcrushedgraded coarse aggregatesand fine aggregatesas per relevant IS Codes...

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) [P.No-9,I.No-5.4 ] (PWD SR 2022-23 4th Quarter issue rate Volume-1

Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per s...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includ...

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required...

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal exp...

Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete a...

Providing and fixing in position fully panelled Honne wood shutters for doors with , stiles and rails of 35mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing...

Providing and fixing in position fully glazed for windows shutters with Honne wood stiles and rails of 35mm. thick 75mm wide in single shutters with 4mm thick plain glass fixed with wooden beading inc...

Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long bracket...

Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Pr...

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1...

Providing and laying vitrified floor tiles Size of Tile 600x600 mm with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all...

Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...

Add Miscellaneous and rounding off

Providing Filling in foundation with granite/ trap broken metal 100mm and down size with approved sand including hand packing, ramming, watering including cost of all materials and labour with lead up...