MISCELLENEOUS MAINTENANCE REPAIRS TO OTM ACCN FDT, ARMY SCHOOL, KAUTILYA HALL, SAHYADRI AUDITORIUM AND HQ SCHOOL OF ARTY IN THE AREA OF AGE B/R CENTRAL UNDER THE AOR OF GE DEOLALI.

Amount

Dismantling floor or wall tiles including cement mortar bedding, removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

M & L for Vitrified ceramic light shade tiles 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. with and including 15mm thick screed bed in CM 1:6 ,set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and directed.

Ditto all as per item No 2 above but in skirting over and incl. 10mm thick backwat in CM 1:4 complete all as specified and directed

M & L for coloured vitrified ceramic tiles light shade 10 mm thick area of each tile exceeding 0.42 sqm but not exceeding 1.00 sqm in floors etc. with and including 15mm thick screed bed in CM 1:6 ,set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and directed.

Ditto all as per item No 4 above but in skirting over and incl. 10mm thick backwat in CM 1:4 complete all as specified and directed

M & L for non skid ceramic tiles of size 7 to 8mm thick (coloured) (Square/rectangular) area of each tile exc 0.11 but n exc 0.18 sqm, in floors, set & jointed in neat cement slurry and pointed in coloured cement to match with over and including 15mm screed in CM 1:6 all as specified and directed.

Ditto all as per item No 6 above but in skirting over 10mm thick backwat in CM 1:4 complete all as specified and directed

M & L for non skid ceramic tiles of size 7 to 8mm thick (coloured) (Square/rectangular) area of each tile exc 0.06 but n exc 0.11 sqm, in floors, set & jointed in neat cement slurry and pointed in coloured cement to match with over and including 15mm screed in CM 1:6.

M&L for coloured glazed ceramic tiles in vertical surface of size 450X 350X 7mm thick of different shade colour and pattern as approved, over and including 10 mm thick rendering in CM 1:4 as backing coat finished to receive wall tiles, set and jointed in neat cement slurry and pointed in white or colour cement to match etc complete all as directed and specified.

Demolition of cement concrete (unreinforced) in ground floors and paving n exc. 15cm thickness (below or above ground level) complete all as specified and directed

M&L for 30mm thick PCC 1:2:4 Type B1 as in levelling course below stone slab/tiles complete all as specified and directed

Demolition of stone slabs, paving stones and tiles of any description and thickness in floors, aprons, laid, bedded and pointed in any mortar complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate ) as in subase finished to receive floor treatment etc complete all as specified and directed.

M & L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab inclunding rubbing and polishing complete incl screed bed 15mm thick in CM 1:6 complete all as specified and directed.

All as per item no 14 above but prepolished stones in skirtings 100mm high with and including 10mm thick CM 1:4 backing coat complete all as specified and directed.

M & L for Rubber moulded chequered cement concrete tiles 20cm x 20cm x 25mm thick with grey cement and pigment, including 15mm thick screed in CM 1:6, set jointed & pointed in neat cement slurry in floors and cut & polished complete all as specified and directed

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade and of approved size and shape and confirming to IS 15658-2006 with grey cement and pigments and including 30mm thick sand bedding layer laid to true line,level watered and mechanically compacted etc complete all as specified and directed.

M & L for machine cut cuddappa stone slab flooring 20 to 25mm thick laid over and jointed with grey cement slurry mixed with pigments to match the shade of slab including 20mm thick screed base (1:6) including rubbing and polishing complete all as specified.

S&F 20 mm thick granite in colour tiles , machine cut beded abd jointed with grey cement slurry and pointed with white cement with admixer of pigment to match the shed of granite stone inclduing grinding and polishing over 20mm thick cement screed base in cm 1:6 complete all as specified.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards / slabs / blankets, any thickness, including cover fillets all as specified and directed.

S&F anodised/powder coated aluminum alloy interlocking snap grid 600mm x 600mm consists of Min Tee runners of size 38mm x 25mm x 1.5mm and cross Tee of size 25mm x 25mm x 1.5mm, spaced between the main Tee at 600mm centre to centre to form a grid of 600mm x 600mm and wall angle 25mm x 25mm x 2mm fixed to wall perimetrs at 450mm centres and shall confirm to IS 733, IS 1285 with and including hangers of 6 mm dia. G.I. (upto 1200mm length and 1200mm centres) adjusting level fixed to roof steel members by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long etc complete all as specified and directed.

M & L for 4mm thick non asbestos fibre cement building boards of make 'E Board classic designer board (Cascade or Occenic) of M/S Everest industries Ltd or equivalent as approved, fixed or laid/ inserted to timber/GI/Aluminium frame work complete all as specified and direced.

S&F PVC wall lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification and drawing.

S&F 5mm thick PVC sheet fillet width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification and drawing.

S&F in repairs 15mm bore fancy type bib taps, chromium plated cast copper alloy quarter turn long body screwed down, screwed for iron pipe etc complete all as directed

S & F in repair Bib tap standard of PTMT any colour 15mm bore high pressure screwed for iron pipe and fixed all as specified and directed

S&F in repairs 15mm bore pillar taps, cast copper alloy with capstan heads, chromium plated,fancy type screwed down high pressure with or without lettered “HOT” or “COLD” with long screwed shanks and fly nuts complete all as specified and directed.

S & F15mm bore, 450mm long, PVC connections with brass unions internally threaded both ends complete fixed to iron pipe at both ends as fixed in repairs complete all as specified and directed

S & F in repairs CP fancy type stop valves ,cast copper alloy, screwed both ends for iron pipe or for union of 15mm bore complete all as specified and directed

S & F flush pipe of polyethylene of low or high density or PVC, 32mm dia for low level flushing cistern/basins complete as fixed in repairs complete all as specified and directed

S & F LDPE pipe 32mm bore fixed to wall/ceiling with bends/elbow complete fixed in repairs complete all as specified and directed

S&F in repairs for grating doom 100mm dia of PTMT(Minimum weight 25gms) etc complete all as specified and directed.

S&F in repairs 10 ltrs capacity PVC flushing cistern, low or high level, with inlet and outlet pipe, ball valve, syphonic action type, float and handle, pull or push type including brackets etc complete all as specified and directed.

Dismantling of water tanks (RCC hume Pipe/PVC) including disconnecting all connections etc. complete for capacity of tanks .

(a) 500 ltrs

(b) 1000 ltrs

Supplying & Fixing only new rotational moulded polythylene water storage tank (cylindrical/vertical with closte top) hoisted and fixed in position all as specified in SSR Part-I including providing and fixing PTMT ball valve high pressure with polythene float and fly nut, 20mm bore complete for tank capacity of: -

(a) 500 ltrs

(b) 1000 ltrs

Taking up or down steel tubing 15mm bore & connections S & F GI tubing medium grade with all fittings & fixed complete to walls /ceiling or laid in floors all as specified & as directed .

Taking up or down steel tubing 20mm bore & connections S & F GI tubing medium grade with all fittings & fixed complete to walls /ceiling or laid in floors all as specified & as directed.

S&F Gun metal or gate valves 15 mm with iron wheel head screwd both ends for iron pipes complete fixed in repair for bore dia complete all as specified and directed

Taking down door shutter with frame n exc 1.5 Sqm each complete all as specified and directed

S&F for PVC door frames of sizes 50 x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube in opening of suitable size complete all as specified and directed

S&F Factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rail, lock rail and bottom rail in either side and as gap insert for top rail and bottom rail pannelling of plain colour PVC sheet to be filled in the MS welded/sealed to the styles and rails with suitable PVC sheet beading and jointed together wiht solvent and fixing in the frame at site as per specification and drawing complete all as specified and directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire stapples complete all as specified and directed.

S & F in repair Galvanised MS wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks or galvanized wire staples including takingout old wire mesh from steel window and fixing old steel flats and nut complete all as specified.and directed.

Hacking out old broken glass from metal frame including punching or drilling out old glazing pins complete all as specified and directed

M & L for sheet glass 3.0 mm thick ordinary quality and glazing with oil putty, in squares exc 0.5 Sq.M in each pan incl hacking out complete all as specified and directed.

S & F 2nd class H.W. glazed & skeleton shutter 35mm thick factory made open rebated & prepared to receive glass gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass,gauge etc size of members complete all as specified and directed.

S & F 2nd class HW shutters 35mm thick, plain framed paneled shutter factory made (two panel) with lock rail & panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS:1003 complete all as specified and directed.

S&F Plain, solid, straight chowkhats and frames of 2nd class Hard Wood wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed all as specified and directed.

Taking down chowkat or frames with Shutters (without taking off shutters from the frame 1.5Sq.M and n exc 4.00 Sqm each and removing from the site by contractor at his own expenses.

Taking down door shutter from frame exc 1 Sqm but not exc 2 Sqm each complete all as specified and directed

M&L for 1.25mm thick mild steel pressed steel frames of size 105x60mm for doors, one or more rebates including necessary fixing lugs, 06nos 100mm size stainless steel hinges (03 nos for each shutter), lock strike plate,filling the hollow portions of steel frame with PCC 1:3:6 type C-0 (12.5mm graded stone aggregate) etc complete all as specified and directed.

S&F 30mm thick flush door shutters solid core construction with block board core and plywood face panels commercial type on both sides etc complete all as specified and directed.

M&L for 12mm thick prelaminated particle board, exterior grade,prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work as in kitchen cabinets cut to the sizes as directed etc complete all as specified and directed.

M&L for 18/19mm thick prelaminated particle board, exterior grade,prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work as in kitchen cabinets shutters and shelves cut to the sizes as directed etc complete all as specified and directed.

S & F 100mm long butt hinges medium weight cold rolled mild steel complete all as specified and directed

S & F in repair mild steel ordinary rat tail rod pattern spring 300mm size including roller & roller plate and incl welding complete all as specified and as directed

S&F in repair 150 mm long Aluminium anodizes barrel tower bolts of extruded section complete all as specified and directed

All as per Item no 57 above but length of bolt 100 mm -ditto-

S&F in repair 150 mm size aluminium anodized handle complete all as specified and directed

All as per Item No 59 above but 100 mm size complete all as specified and directed

S & F in repairs aluminium floor door stoppers double legged length 140mm with hard drawn steel spring fitted in floor complete all as specified and directed.

M & L for preparation of new wood surfaces of any description over 10cm in girth or width & applying two coats of synthetic enamel paint over a coat of primerprimer complete all as specified and directed

M&L for 250 mm long aluminium alloy anodized sliding door bolts with Hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed

S & F mild steel Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete, confirming to Fe-290 Gde E-165 complete all as specified and directed

M&L for painting with two coats of synthetic enamel paint to steel surfaces of any description over 10cm width or girth on untreated steel surfaces over a coat of red oxide primer after preparation of surfaces complete all as specified and directed.

Taking down steel window/ventilator complete all as specified and as directed

S&F factory made steel Window , with side hung shutter including projecting hinges with steel handle, stay complete with glazing bar and guard bar devetailed or welded complete all as specified.

S&F steel ventilator fixed type with glazing bars complete all as specified and as directed

S&F coloured powder coated (50 micron) aluminium sections any type for doors,windows, ventilators frames including joining cleat for fixing etc. complete all as specified and directed.

Supply and fixing powder coated (thickness of powder coating not less than 50 micron) aluminium window shutters, aluminum section weighing not less than 0.55kg / rm including necessary joining cleats, glazing clips, rubber packing, anodized aluminum snap beading, screws, anodized aluminum fittings complete all as specified and directed.

S & F 5.50 mm thick sheet glass fixed in window shutters etc complete all as specified and directed.

Providing stainless steel railing/ grill made of S.S. flats, hollow S.S. pipe or square/ rectangular sections of approved design fixing in stair case, balcony or other places with metal fasteners and stainless steel bolts etc complete.

Dismantling timber scantlings 40 sq. cm and over in section, in any position from unframed work as in roof members complete all as specified and directed

M&L for clean sawn 02nd class hardwood in scantlings etc complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) as in plinth protection including making joint at every 3 mtr interval and at corner and filled with mixture of bitumen and sand and finished even and fair and laid in alternate bays complete all as specified and directed.

S&F in repairs sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm etc complete all as specified and directed.

S&F in repairs 15mm size fancy type brass chromium plated wall mixer 3-in-1 system with and including both telephone shower and overhead shower complete with wall flange, 115mm long bend pipe, shower arm 190mm long heavy casted body with wall flange and pressure adjustable shower with revolving joint of approved series of make or equivalent of Marc etc complete all as specified and directed.

S&F in repairs glass shelf of size 600x125mm with brass chromiun plated fancy brackets and railing fixed with screws and wooden/plastic cleats etc complete all as specified and directed.

S&F in repairs Soap dish, vitreous China white, approximate size 160x 160x90mm fixed to plugs with chromium plated brass screws etc complete all as specified and directed.

S&F in repairs fancy type Brass chromium plated 600mm long Towel Rod fixed with screws and wooden/plastic cleats etc complete all as specified and directed.

M&L in repairs Cast iron Nahani traps with diameter of outlet 75mm with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) etc complete all as directed.

S&F in repairs glazed earthen ware viterous china wash basin white coloured (flat back or angle back type), size 550x400 mm and including CI brackets and outlet of 32mm bore waste fittings, brass chromium plated for glazed ware sinks, basins, etc with long screwed shanks and fly nuts, etc complete all specified and directed. etc complete all as directed.

S&F in repairs glazed earthen ware viterous china wash down water closet(pedestal pattern) white coloured with and including plastic water closed seat, white, closed pattern with recessed bottom, and cover and mild steel chromium plated hinging device etc complete all as specified and directed.

S & F in repairs vitreous china squatting Pan “Orissa” Pattern, of size 580mm x 440mm white with integral foot rests (excluding flushing cistern and flush pipe) including provn of cement concrete bedding etc complete all as specified and directed.

S&F in repairs vitreous China urinals half Stall type (back to corner wall type), complete including providing and fixing plus, bedding urinal against wall in cement mortar 1:2 securing urinal to plus with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe inclusive of necessary 40 mm dia Waste fittings, brass, chromium plated for glazed ware sinks, basins,urinals etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other and fixed etc complete all as specified and directed.

S&F vitreous china urinal partition white of size 310 x 700mm etc complete all as specified and directed.

S&F in repairs Toilet paper holder, vitreous China, box type ' white coloured fixed to walls with chromium plated (CP) brass screws etc complete all as specified and directed.

S&F in repairs brass chromium plated fancy type health faucet or aeroplane jet with 900mm long stainless steel knitted hose pipe for faucet/sensor mixer etc complete all as specified and directed.

S&F Ball catches with 8mm dia steel ball, and bras body and striking plate including letting in and fixed

Dismantling of Cast iron or reinforced concrete drain pipes 100 mm bore all as specified and directed.

S&F for 110mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall / floor complete all as specified and directed

All as per item No 92 but except pipe complete all as specified and directed

S&F for for 75mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall / floor. complete all as specified and directed

All as per item No 94 but except pipecomplete all as specified and directed

S&F PVC (SWR) bend any radius 110mm complete all as specified and directed

S&F PVC (SWR) bend any radius 75mm complete all as specified and directed

S&F in repair Drapory rod 25mm dia alluminium alloy powder coated fixed with fancy type matching pair of bracket not less than 75 grams each fixed with screw .complete all as specified and directed

S&F 150 mm long Aluminium anodized barrel tower bolts of extruded section complete all as specified and directed

S&F 150 mm size aluminium anodized handle complete all as specified and directed

S & F 0.56mm thick plain aluminium sheeting alloy 31000H4 in ridges, hips valleys as in covering to doors etc all as specified and directed

Dismantling of asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings including ridges etc complete all as specified and directed.

M&L for 6mm thick asbestos cement corrugated or semicorrugated sheets as in roof, wall coverings fixed with J/L type bolts or cranked hook bolts etc complete all as specified and directed.

All as per item no 103 above but except sheets. (Note: Serviceable sheets obtained from dismantling shall be reused.)

S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering including ridges /cladding to wall,fixed with self tapping screws as specified and directed.

S & F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering including ridges /cladding to wall,fixed with self tapping screws as specified and directed.

S&F mild steel work(Tubular/ Hollow Section) as in Purlin, and wind ties as in roof including , flat iron fillets for securing wire mesh etc including all necessary drilling bolting or riverting, etc, and similar work conforming to Fe-290 Gde E-165complete all as specified and directed.

S & F in repair ball brass valves high pressure with polythene float and fly nuts complete, screwed for iron pipe and fixed 20mm bore all as specified and directed

Taking down carefully existing unserviceable bitumen felt(any number of layers) including plaster of any thickness,wire brushing and cleaning of the surface of roof terraces including flashing and junctions of parapets kerb wall,PCC fillets,benching etc and removing of the rubbish to a distance not exceeding 500 M from the building and depositing where complete all as specified and directed.

Demolition of cement concrete of any description (Unreinforced) above ground floor incl concrete at junctions of parapets and roof terraces, flashings, Kerbs walls,PCC fillets, benching,coving of chajjah top/junctions etc complete all as specified and directed.

M &L for providing 25 mm thick plain cement concrete 1:2:4 type B0 (using 12.5 mm graded stone aggregate) for filleting, benching,coving of chajjah top/junctions,padding concrete below roof treatment etc slightly rounded or chamfered on edges wherever required including necessary form work / moulds etc including applying cement slurry on surface area @ 2.50 Kg /Sqm complete all as specified and as directed .

M&L for rendering 10mm thick CM (1:4) on roof slab top, mixed with water proofing liquid finished even and fair without using extra cement complete all as specified. Note: Water Proofing liquid shall be measured and paid separately.

M & L for cleaning the newly plastered surfaces of concrete ( roof etc) with wire brushes and applying water proofing treatment as under :- i) Apply one coat of oil bound bituminous primer @ 0.25 kg/Sq.M ii) Providing and laying 3 mm thick APP modified water proofing membrane weighing not less than 3.5 Kg / Sqm reinforced with non woven polyester mat weighing not less than 160 gm/Sqm all as specified procured from any one of the approved manufacturer's iii) Apply one coat of solar reflective bituminous aluminium paint @ 0.15 Kg/Sqm over membrane over non assesble roof surfaces complete all as per manufacturer's instructions and as directed .

Supply only water proofing liquid as specified and directed.

Dismantling of single layer Mangalore pattern or similar tiles in roofing incl ridge/hip tiles etc complete all as specified and directed.

M & L for Mangalore pattern ridge / HIP tiles to suit Mangalore pattern of roofing tiles, bedded and jointed in cm 1:6 complete all as complete all as specified and directed.

All as per item No. 116 above but except tiles.

M & L for roof tile Mangalore pattern inter locking at side joints,laid dry complete all as specified and directed.

All as per item No.118 above but except tiles.

Dismantling battens for tiles of any size spaced exc. 15cm of any description of any size incl tilting fillets, single if any complete all as specified and directed.

M & L for 2nd class HW, clean sawn, battens for tiles sectional area exc 5 and not exc 15 Sq.cm fixed at 30cm center to center complete all as specified and directed.

All as per item No. 121 above but except battens

Dismantling of posts or struts(wood, steel or RCC) any section embadded in concrete, including taking out embedded portion and making good disturbed ground

Dismantling of existing loose cement concrete with rain water exist PVC bands from roof sides/Toilet SWR outlets and M&L for 110mm PVC (SWR) bands with branch piece fixed with PCC 1:1.5:3 and finally finish with CM 1:2 mixed with water proofing liquid conplast 421 of make Fosroc or equivalent and one end connected to the existing rain water pipe/Toilet SWR outlets incluing necessary scaffolding & formwork required upto 3 storey building all as specified and directed.

Demolition of brick work / stone boulders masonry built in cement mortar incl all Quoins , archeas, pillars etc bu exc cluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed.

M&L for fly ash brick work with old size sub class 'B' bricks straight or curved on plan exc. 6m mean radius and built in CM 1:6 etc complete all as specified and directed.

Ditto all as per sl item No 126, but except bricks

Taking down cement plaster any description on brick or stone walls etc including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

M & L for rendering 5mm thick plaster in CM (1:3) mixed with integral WPC on faces of brick work or concrete on ceiling surfaces, finished even and smooth without using extra cement complete all as specified and directed.(WPC shall be measured and paid separately).

M & L for rendering 15mm (in two layers of 5 mm and 10 mm) thick plaster in CM (1:6) mixed with integral WPC on faces of brick work or concrete surfaces, finished with 1mm thick sagol finish complete all as specified and directed. (WPC shall be measured and paid separately).

M & L for rendering 15mm thick plaster in CM (1:4) on faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed

M&L for preparation of new plastered surfaces of walls and applying three coats of white wash complete all as specified and directed

M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed

M&L for preparation of decorated plastered or unplastered new surfaces of wall and applying two coat of cement based paint (White & red colour or as specified and directed by Engr-in-charge) over one coat of alkali-resistant primer on new surfaces of walls etc complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying one coat of alkali resistant primer over and incl. a coat of 1 mm thick cement putty, and finally applying two coats of oil emulsion distemper etc complete all as directed.

M&L for complete removal of existing treatment on surfaces of walls, removal of unnecessary nails with mechanical means/grinder, including filling of cracks/holes by crack filler etc, preparing surface by one coat of 2mm thick putty and applying two coats of oil emulsion distemper over one coat of primer complete all as specified and as directed.

M&L for complete removal of existing treatment on surfaces of walls, applying two coats of weather emulsion ( white/red colour or as specified and directed by Engr-in-charge) " over one coat of primer over 2mm thick Wall Putty for levelling and smoothening, including removal of unnecessary nails, filling of cracks/holes ,repair/crack filler mortar, including preparation of old decorated plastered or unplastered surfaces of walls/ceiling complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for and fixed in any position etc complete all as specified and directed.

S&F for mild steel Framed work such as, in ornament and intricate design, grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 with cutting top drilling holes including necessary welding complete all as specified and directed.

Note: Amount of sch of credit of RS. 67955.00/- will be deducted from total amount of BOQ.

JEET CONSTRUCTIONS CO.

K P Enterprises

M/S MANISH CONSTRUCTION CO

M/S YOGESH CONSTRUCTION

J Sams Contructions

SHYAM CONSTRUCTION

M/S SAMEER SUBHASH PATANI