REPAIR AND MAINT OF SANITARY PLUMBING AND ALLIED SERVICES UNDER AREA AGE BR I OF GE AF TECH AREA AT AF STN AGRA

Taking down GI pipe of any grade of 15mm bore including fittings complete all as specified and directed.

Taking down GI pipe of any grade of 20mm bore including fittings complete all as specified and directed.

Taking up or down 25mm or 32mm bore steel tubing including fittings and connections including cleaning for refixing or removal to store all as specified and as directed.

S&F steel water tubing medium grade galvanized with all fittings and fixed complete to walls, ceilings or laid on floors, bore of tube 15mm complete all as specified and directed.

S&F steel water tubing medium grade galvanized with all fittings and fixed complete to walls, ceilings or laid on floors, bore of tube 20 mm complete all as specified and directed.

S&F for 25mm bore steel water tubes, 'medium grade' galvanised, with and including all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed

S&F for 32mm bore steel water tubes, 'medium grade' galvanised, with and including all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed

Refixing of old steel water tubing of 15 mm bore and connection in new or old position with new fittings fixed to the walls, ceiling or laid in floor complete all as specified and directed.

Refixing of old steel water tubing of 20 mm bore and connection in new or old position with new fittings fixed to the walls, ceiling or laid in floor complete all as specified and directed.

S & F in repairs PVC valveless,syphonic action type, low level PVC flushing cistren, dual flush, 10 litres capacity, white with flush pipe & all fitting complete all as specified and directed.

S&F in repair 15 mm bore bib taps fancy type ,chromium plated, long neck cast copper alloy with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule all as specified.

S&F in repair 15mm dia, stop valve fancy type, cast copper alloy,chromium plated ,screwed down high pressure, with crutch or butterfly handles for 15 mm bore pipe or for unions complete all as specified and directed.

S&F in repair 15mm dia, stop valve, fancy type with long shank and cup (concealed type), cast copper alloy,chromium plated ,screwed down high pressure, with crutch or butterfly handles for 15 mm bore pipe or for unions complete all as specified and directed.

S & F in repair 15 mm bore swan neck pillar tap fancy type , cast copper alloy, with capstan head, chromium plated, screwed down high pressure, with or without letter Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe all as specified and directed.

S&F in repair CP wall mixer for mixing Hot & cold water screwed down for iron pipe 15mm bore complete all as specified and directed.

S&F in repair CP wash basin mixture fancy type, with capstan heads, chromium plated, screwed down for high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts screwed for 15mm iron pipe and fixed comple all as specified and directed .

S&F in repair 25mm dia PTMT ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed.(min wt- 455 gms), complete all as specified and directed.

S&F in repair 20mm dia PTMT ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed.(min wt- 210 gms), complete all as specified and directed.

S&F in repair 15mm dia PTMT ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed.(min wt- 142 gms), complete all as specified and directed.

S&F in repair chromium plated soap dish, fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F in repair gratings of 100mm dia made of stainless steel with waste hole complete all as specified and directed

S&F in repair gratings of 125mm dia made of stainless steel with waste hole complete all as specified and directed

S&F in repair Chromium plated shower rose with shower arm round 100mm ABS full chrome with min arm 225 mm with or without swivel joints, any size, including fixing with GI pipe of 15 mm bore complete all as specified and directed.

S&F in repair 6mm thick looking mirror fixed to wall with stainless steel plug/ connector/ spacers/ screws etc. chrome finish polished, bevelled edge etc.complete all as specified and directed

S&F in repair PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repair Chromium plated Health Faucet for bore size 15mm (flexible tube and hand shower) ,wall mounting type suitable for EWC; with CP nuts and washer incl square hook ABS , of length 900mm complete all as specified and directed.

S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 6 cm wide complete all as specified and directed.

Disconnecting existing water tank setting aside ( or lowering if required ) for repairs cleaning etc and hoisting if required reconnecting and re-fixing in position including cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc capacity exc 250 ltr but n.exc 500 ltrs, complete all as specified and as directed.

Description all as per item No 28 above but capacity exc 500 ltr but n.exc 1000 ltrs.

Description all as per item No 28 above but capacity exc 1000 ltr but n.exc 2000 ltrs.

Dismantling PVC water tanks of capacity exc 250 ltrs but n.exc 500 ltrs in any position and removing from site complete all as specified and as directed.

Dismantling PVC water tanks of capacity exc 500 ltrs but n.exc 1000 ltrs in any position and removing from site complete all as specified and as directed.

S&F tripple layer rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted & fixed in position all as specified in SSR Part I of 500 ltrs capacity with & including 20mm dia PTMT float valve complete all as specified and directed.

S&F tripple layer rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted & fixed in position all as specified in SSR Part I of 1000 ltrs capacity with & including 20mm dia PTMT float valve complete all as specified and directed.

S&F in repair wash basin waste coupling 32 mm dia of CP (half or full threaded) Minimum weight 45gms complete all as specified and directed.

S&F in repair sink waste coupling 40 mm dia of CP (half or full threaded) Minimum weight 60 gms complete all as specified and directed.

S & F in repair flexible PVC waste pipe of 32 mm dia, 600 mm long complete all as specified and directed.

S&F in repair 160mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors / fixed to walls with and including stack clamps complete all as specified and as directed

S&F in repair 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints,, laid in trenches or in floors / fixed to walls with and including stack clamps complete all as specified and as directed

S&F in repair 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls / floors or in trenches with and including stack clamps complete all as specified and as directed

S & F in repair bend suitable for 160mm dia PVC (SWR) pipe complete all as specified and as directed

S & F in repair bend suitable for 110mm dia PVC (SWR) pipe complete all as specified and as directed

S & F in repairs bend suitable for 75mm dia PVC (SWR) pipe complete all as specified and as directed

S&F in repair chromium plated Toilet paper holder incl movable flap and fixed to walls with chromium plated brass screws complete all as specified and directed.

S&F in repair vitreous china wash hand basin, white, (flat back or angle back type) of size 580x450 mm including supplied and fixing angle iron braket and CP Pillar tap fancy type 15 mm bore,CP waste coupling, PVC waste pipe 32 mm dia, and 01 No PVC connection 15 mm dia & 450 mm long complete all as specified and directed.

S&F in repair sink without drainage board made of stainless steel 1 mm thick with plug and washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever bracket and connecting union to pipe overall size 915x460 mm and bowl size 410x330x160 mm complete all as specified and directed.

S&F in repair sink with drainage board made of stainless steel 1 mm thick with plug and washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever bracket and connecting union to pipe overall size 915x460 mm and bowl size 410x330x160 mm complete all as specified and directed.

S&F in repairs vitreous china squatting pan orissa pattern of size 580mm x 440mm, white with 'P' or 'S' trap front of back inlet and integral foot rest complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan pedestal pattern white ( S trap) with and including fixing bolts, flushing cistern, flush pipe, PVC connection including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan pedestal pattern white ( P trap) with and including fixing bolts, flushing cistern, flush pipe, PVC connection including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc complete all as specified and directed.

S&F in repair plastic seat cover for EWC with & including hinging device complete all as specified and directed.

S&F in repair vitreous china urinal full stall type automatic infrared motion sensors with flat back size of white with grating and union for discharge pipe including chromium plated water spreader, connection pipe and discharge down pipe complete all as specified and as directed.

Taking down cement / lime plaster of any description on brick work or stone walls etc including racking out joints hacking for key scrubbing down with water etc.complete all as specified and as directed

M&L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick work/concrete surfaces finished the surface even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:6 on other than fair faces of brick work or concrete surfaces finished the surface enen and smooth without using extra cement complete all as specified and directed

M&L for rendering 10mm thick in CM 1:3 on concrete surfaces in ceilings comple all as specified and directed .

M&L for preparation of new plastered surfaces of Wall and applying two coats of weather proof exterior emulsion paint in normal pattern , over a coat of primer as per manufacturers instructions complete all as specified and as directed.

M&L for two coats of distemper oil emulsion over newely plastered surfaces of wall including preparation of surfaces complete all as specified and directed.

M&L for preparation of newly plastered surface of ceiling and applying two coats of white wash complete all as specified and directed.

M&L for welding in repair exc 2.5 cm but n.exc 5cm in length, thickness of metal to be welded n.exc 6mm complete all as specified and directed.

S&F in repairs CP tubular towel rail 20mm dia, D type, 600mm long between flanges complete all as specified and directed .

S&F in repairs 15mm bore CP angle stop valve screwed for iron pipe and fixed in position complete all as specified and directed.

S&F in repair urinal spreader of Chromium Plated any colour for fixing with 15 mm dia pipe. (Minimum weight 100gms) complete all as specified and as directed.

S&F in repair vitreous china urinal full stall type flat back size of white with grating and union for discharge pipe including chromium plated water spreader, connection pipe and discharge down pipe complete all as specified and as directed

S&F in repair CI brackets for WHB, of angle iron 35mm x 35mm x 5mm of required length with and including embedding in PCC 1:2:4 type B1 (using 20mm graded stone aggregates) and two coats of painting with synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor and paving exc. 15 cm thickness (below or above ground level) complete all as specified and as directed

M&L for 100mm thick PCC (1:4:8) type D2 using 40mm graded stone aggregate as in sub base of floor etc complete all as specified and as directed

M&L for 25mm thick sand cushioning laid dry to the profile under interlocking block complete all as specified and as directed

M&L for machine pressed precast concrete interlocking paver block of approved shape and size of 60 mm thickness using grey cement and pigment , with minimum M-35 grade, without correction factor for chamfering, made in rubber moulds with 0.50 mm thick scratch proof lacquer coating on top surface complete all as specified and as directed

M&L for 100mm thick PCC (1:3:6) type B2 using 20mm graded stone aggregate as in sub base of floor etc complete all as specified and as directed

M&L for chequered cement concrete tile 20cmx20cmx25mm thick, set jointed and pointed in neat cement slurry in floors and including 20mm thick screed bed in CM (1:6) of approved colour and pointing with grey cement and pigment complete all as specified and directed.

M&L for outdoor coloured industrial tiles, textured surfaces with high skid resistance, scratch resistant, impact resistant, joint free (edge cut) of size 300 mm x 300 mm x 8 to 10 mm thick as in floors etc laid over with and including 15 mm thick screed bed or bedding layer in CM (1:6), set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete all as specified and as directed

Dismantling floor, hearth or wall tiling including cement mortar bedding and removing rubbish off the premises complete all as specified and as directed

M&L for 25 mm thick PCC 1:2:4, type B0 (using 12.5 mm graded stone aggregate) as in flooring in leveling course complete all as specified and as directed

M&L for light shade vitrified ceramic tiles, joint free (edge cut) coloured , 9 to 10mm thick (square/ rectangular) polished, area of each tile n.exc 0.36 sqm, in floors etc laid over with and including 15 mm thick screed bed or bedding layer in cement mortar 1:6, set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete.all as specified and as directed.

M&L for 10 mm thick Vitrified ceramic tiles, light shade double charged (square/recangular) area of each tile exceeding 0.42 Sqm but not exceeding 0.85sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of 15 mm thick in CM (1:6) for laying floor finishes complete all as specified and directed.Note:-Any of Make among Kajaria/Nitco and equivalent tiles of premium quality will be procured as per direction by Engr-in-charge.

M&L for light shade vitrified ceramic tiles, joint free (edge cut) coloured , 9 to 10mm thick (square/ rectangular) polished, area of each tile n.exc 0.36 sqm, in vertical surfaces etc laid over with and including 10 mm thick rendering for backing layer in cement mortar 1:4, set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete all as specified and as directed.

M&L for Non skid, joint free (edge cut) coloured ceramic tiles 7 to 8 mm thick (Square / rectangular) polished area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors etc laid over with and including 15 mm thick screed bed or bedding layer in cement mortar 1:6, set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete all as specified and as directed.

M&L for Non skid, joint free (edge cut) coloured ceramic tiles 7 to 8 mm thick (Square / rectangular) polished area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in vertical surfaces laid over with and including 10 mm thick rendering for backing layer in cement mortar 1:4, set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete all as specified and as directed.

M&L for Non skid, joint free (edge cut) coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floors etc laid over with and including 15 mm thick screed bed or bedding layer in cement mortar 1:6, set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete all as specified and as directed.

M&L for machine cut kota stone slab flooring 18 to 20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete with and including 20mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L for machine cut kota stone slab 18 to 20mm thick as in dado, riser, steps and the likes laid over with and including rendering 15mm thick in CM 1:4 for bedding layer complete all as specified and as directed.

M&L for 14 mm to 18 mm thick Granite telephonic black (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, oval shape WHB, wall claddings and the likes; in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed..

M&L for glazed ceramic coloured tiles 300x450x 7mm thick as in dado with and including 10mm thick rendering for bedding layer in CM 1:4, set and jointed in neat cement slurry and pointed with white cement complete all as specified and as directed.

Demolition of brick work or stone masonry built in cement mortar including all quoins, pillars, arches etc. but excluding ashlar facings, dressed stone work and precast concrete articles, complete all as specified and as directed.

M & L for brickwork with subclass `B' bricks, using old size bricks, straight or curved on plan exc 6m mean radius, built in CM 1: 6 all as specified and as directed.

Taking down door chowkhat with shutter area n.exc 1.5 Sqm each (without taking off shutters from the frame) including making good of jambs with cement mortar 1:4 etc complete all as specified and as directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube fixed in opening as per specification and shown in drg in SSR Part -II 2020 complete all as specified and as directed

S&F factory made solid panel PVC door moulded shutter 30mm thick consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain cover PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement as per specification and drg shown in SSR Part -II 2020 complete all as specified and as directed

S&F stainless steel finished butt hinges medium weight cold rolled of size 100mm complete all as specified and as directed.

S&F 100 mm long alluminium anodised tower bolt of extruded section complete all as specified and as directed

S&F 100 mm long extruded alluminium alloy handle fabricated type anodised complete all as specified and as directed

Taking down old steel/wooden windows with holdfast & making good surface to match with the existing and S&F windows/ ventilators fabricated from 0.6mm thick roll formed section made of galvanised steel powder coated (Base steel as per IS- 513 'D' quality) galvanised as per IS-277 with Zinc of 120 gm/sqm. Windows/ventilators having frame suitable for dual shutter i.e. inner and outer shutter with grill, glazed shutter with 4.0 mm thick glass, mesh shutter with 32 gauge stainless steel mesh, 6mm x 12mm flat iron with 10mm square bar MS grill and all fitting, fixtures accessories complete all as specified and shown in drawing no CEAF/STD-191/2014 Sheet 1/2 & 2/2 (4000 Series) NOTE: The quoted rate shall be deemed to be included the following:- (i) Glazed shutter with 4.00 mm thick glass, mesh shutter with 32 gauge stainless mesh and MS grill as per above mentioned drawing is deemed to be inclusive in the rate quoted. (ii) Glass, stainless steel mesh will be fixed to window by authorised rep of manufacturer of window only. (iii) making good of jambs in CM (1:4) and applying OBD in two coats including with putty complete.

Deduct Schedule of Credit of Rs 52888.00 as brought out from serial page No 36 of tender

SCHEDULE OF CREDIT

1. All worn out/unserviceable materials/items which will be obtained from different items of Sch `A’/ BOQ (as mentioned above) during replacement work, shall become contractor’s property and amount of credit shall be recovered from the contractor's RAR & final bill as and when payments are submitted. These materials shall be allowed to be removed from works site only after credit amount for the same is recovered from the contractor’s payment. Items not covered under this Schedule shall become the property of department and the same shall be returned/ deposited by the contractor at MES store yard without any extra cost to department/ government and all materials which are credited to the contractor, shall be recorded in MB

2. The contractor shall have no claim regarding fixation of credit rates in this schedule and no rebate on "Schedule of credit" rates/ amount shall be accepted. However contractor can offer more credit rates/ amount.

3. The total credit amount may vary as per execution of work above different items involved in this credit schedule.

4. The quantities given in column 4 are provisional and same shall be measured and paid based on actual quantities obtained against relevant items of Schedule ‘A’/ BOQ. These materials shall not be reused/ reincorporated in the work except where specified.

5. The measurements of dismantled materials shall be the gross quantity obtained and not the net quantity considered for payment in schedule. The old and unserviceable materials to be retrieved from taking down/demolition/dismantling etc are considered in schedule of credit. No claim of contractor with regard to quality/position of old materials shall be entertained

Srl No

Rate in (Rs)

Old unserviceable CP bib tap/pillar tap/Stop valves/angle stop valves/shower/jet spray of any description

Old unserviceable PVC rain water pipe of any size and descrption incl bends and fittings complete

Old unserviceable PVC bends of any size and description

Old unserviceable PVC flushing cistern of any type and description

Old unserviceable CP wall mixer/basin mixer of any type and description

Old unserviceable PTMT float valve of any size and description with ball and fittings complete

Old unserviceable CP towel rail any description

Old unserviceable GI pipe of 15 mm bore incl fittings

Old unserviceable GI pipe of 20 mm bore incl fittings

Old unserviceable GI pipe of 25 mm bore incl fittings

Old unserviceable GI pipe of 32 mm bore incl fittings

Old unserviceable sink of any description

Old unserviceable grating/soap dish/toilet paper holder/glass shelf with railing/urinal spreader of any description

Old unserviceable WHB, urinal pots, water closets of any size and description including fittings complete

Old unserviceable PVC connection of any size and description

Old unserviceable waste coupling and waste pipe of any size and description

Old unserviceable EWC seat cover of any type and description

Old unserviceable PVC water tank 1000 ltr capacity

Old unserviceable PVC water tank 500ltr capacity

Old UNSV chowkat or frames with shutters area not exc1.5 Sqm each with complete fittings

Old tiles of any description

Total amount of credit schedule

Signature of contractor

For ACCEPTING OFFICER