Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹89.6 LAccepted-AOC | L1 | Accepted-AOC Being lowest bidder | |
| 2 | L2₹99.2 L+₹8.3 L (9.19%)Rejected-Finance 30 HAREN MUKHERJEE ROAD HAKIMPARA SILIGURI 734 001 DARIEELING WB | DARJEELING | WEST BENGAL | 734001 | L2 | Rejected-Finance Other than lowest bidder |
Tender Value
₹93.5 L
EMD Value
₹1.7 L
Closing Date
9 Mar 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE Bengdubi
Headquarters Commander Works Engineer Bengdubi Post-Bengdubi Distt-Darjleeling (WB) 734424
PROVN OF FULL PARTITION WALL, STEEL WATER STAGING FOR 2000 LTRS TANK, 11MTR POLES, GOD, DO JOINTING KITS AND TROLLEY MOUNTED TRANSFORMER INCL SPECIAL REPAIR/ REPLACEMENT OF UNDERGROUND HT CABLE AT SUNKA MIL STN UNDER GE SUNKNA
2023_MES_577414_1
8168/E8
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
SUKNA
Please refer Tender documents.
7 documents required · 7 mandatory
₹1,000
GE SUKNA
₹1.7 L
29 Mar 2023
27 Jan 2023
15 Mar 2023
27 Jan 2023
9 Mar 2023
18 Feb 2023
Amount
Surface excavation n.exc 30cm deep and average 15cm deep and getting out in soft/loose soil complete all as specified and directed.
Excavation in trenches not exceeding 1.5 metre wide & not exceeding 1.5m in depth for foundation etc laying/ removing of pipes, pole and cables etc and getting out in soft/loose soil complete all as specified and directed.
All as per item No. 2.00 above but depth exceeding 1.50 metre and not exceeding 3.00 metre.
Removal excavated material n exc 50m and depositing where directed at a level not exceeding 1.5 metre above the starting point in soil of excavation, complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and as directed.
M&L for hardcore of broken stones or boulders of gauge not exc 63 mm, deposited, spread and levelled in layers not exc 15 cm thick, watered & rammed to a true surface, complete all as specified and directed.
M&L for plain cement concrete 1:4:8 type D-2 (using 40 mm grades stone aggregates) as in foundations and mass concrete etc complete all as specified and directed.
M&L for 100 mm thick cement concrete 1:4:8 type D-2 with using (40 mm graded stone aggregates) as in sub-base of flooing etc complete all as specified and as directed.
S&F mild steel conforming to(Fe.410.Gde-E-250) quality A framed work such as compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc complete all as specified and as directed.
S&F medium grade galvanized steel tubing with all fittings & fixed complete to walls & ceiling or laid in floors 20 mm dia bore pipe (including in short length) complete all as specified and as directed.
S&F rotational moulded polyethylene water storage tank 2000 Litres capacity, ISI marked, (cylindrical vertical type double-layered) with closed top hoisted and fixed in position and including 20 mm dia niple suitable for water tank (minimum weight 45 grams), 20 mm bore ball valve ( minimum weight 210 grams) high pressureof PTMT with epoxy coated aluminium rod fixed to 20mm bore pipe and locking with GI wire( to prevent monkey menace) to tank, complete all as specified and as directed.
M&L for Brickwork with Sub class 'B' old size bricks of class designation 75 (i.e average compressive strength 75 Kg / cm2), straight or curved on plan exc 6m mean radius, built in CM 1:6, complete all as specified and directed.
Use and waste of formwork to sides and soffits of floor or roof beams, beam haunch ings, girders, ressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc, complete all as specified and as directed.
M&L for reinforced cement concrete (1:11/2:3) type A-1 (using 20 mm graded stone aggrgates ) as in Beams, cantilevers, bressumers, lintels over 1.5 metre span, complete all as specified and directed. Note: Reinforcement and Form work shall be measured and paid for seperately.
M&L for TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, or securing with clips etc, complete all as specified and as directed.
M&L TMT bars 8mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc, complete all as specified and as directed.
S&F factory made 1.25 mm thick pressed steel frame of size 105 X 60 mm for doors with one or more rebates including necessary provision of lugs, locks strike plate etc, applying one shop coat of Zinc Chromate primer after prepation of the surfaces, complete all as specified and as directed.
M&L for cement concrete 1:2:4 type, B1 using 20 mm graded stone aggregates as in copings, Chajja kerbs, roof padding/staging of water tank, hold-fast blocks, PCC filling for pressed steel door frame etc, including necessary formwork, weathering, slightly rounded or chamfered angles & throating, complete all as specified and as directed.
S&F Factory made 30mm thick flush shutter solid core construction with Medium Density Fibre Board Core, Exterior Grade, commercial type on both sides including provision of 4mm thick 2nd class hard wood edging to the exposed edges of the shutter, complete all as specified and as directed.
M&L for Preparation of steel & iron surfaces duly applied the primer in the workshop of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint, complete all as specified and as directed.
M&L for Preparation of new steel and iron surfaces of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and as directed.
M&L for Preparation of new steel and iron surfaces of any description, under 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and as directed.
M&L for Preparation of new wooden surfaces of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and as directed.
S&F Aluminium anodised barrel tower bolt 150 mm long of extruded section, complete all as specified and as directed.
S&F 150 mm size aluminium handle, cast type, anodised, complete all as specified and as directed.
S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy, complete all as specified and as directed.
M&L for rendering 15mm thick in CM 1:4 mixed with W.P.C on the surfaces of brick or concrete, finished even and smooth without using extra cement, complete all as specified and as directed. Note:- W.P.C shall be measured and paid for seperately as " supply only".
M&L for rendering 15 mm thick in CM (1:6) on fair faces of brick work or concrete, finsihed even and smooth (without using extra cement), complete all as specified and as directed.
Supply only Integral water proofing compound, complete all as specified and as directed.
M&L for preparing new plastered surfaces of wall and applying three coats of white wash, complete all as specified and as directed.
M&L for applying Two coats of cement base paint over, also including preparation of new surfaces of wall etc, complete all as specified and directed.
M & L for cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of preparation of exposed surfaces, application of one coat of red oxide primer and thereafter 2 coats of aluminiuam paint, complete all as specified and directed. General Note for item Nos 33 to 48 : Contractor/Firm is required to visit the site of work for any doubts/clarification w.r.t specifications/qty/site location etc, before quoting of the tender. Any query/clarification etc after conclusion of the contract shall not be entertained & decision of the Accepting Officer shall be final & binding.
S&F 11 KV, 400 Amps, out door, tilting type, gang operated, air break off load disconnecting switch, triple pole, each consists of galvanized channel base HT insulator,non - ferrous knife and spring loaded contacts, arcing horn of adequate section to break magnetizing current of the transformer, horizontal GI pipe of adequate length for phase separation and for operation from ground level and operating handle, complete with locking arrangement on both ON and OFF position, all ferrous parts shall be hot dipped galvanized and non ferrous parts heavily tinned to withstand weather suitable for vertical mounting and conforming to IS 1818-1961, complete all as specified and as directed.
Supply, laying and testing cable XLPE insulated, screened PVC bedded, galvanised steel strip or wire armoured electric power cables (heavy duty) with stranded aluminium conductor 11000 0volts (Eartherd) grade of size 95 Sqmm 3 core complete all as specified and directed.
Supply, laying and testing cable XLPE insulated, screened PVC bedded, galvanised steel strip or wire armoured electric power cables (heavy duty) with stranded aluminium conductor 1100 volts (Eartherd) grade of size 400Sqmm 3.5 core complete all as specified and directed.
M&L for 11 KV (Earthed) grade Ariel Bunched Cable 95 Sqmm with 3 (three) power cores, stranded, compacted circular aluminium conductor, natural coloured XLPE insulated cores screened with black extruded semi-conducting compound, one layer of copper tape and covered with black extruded PVC, core identification by colour tape marking Red, Yellow and Blue with colour tape placed longitudinally under the copper tape and one bare messenger wire 70 Sqmm shall be stranded non-compacted circular aluminium alloy conductor including taking down old unsv HT Cable any type/size, complete all as specified and directed. Note:(i) The cable should conform to IS-8130: 1984, IS-398 (Part-IV): 1994, IS-7098 (Part-II): 2011, IS-5831: 1984 with latest amendments, if any. (ii) Cost of hanging clamps, nut and bolts required deemed to be included in quoted rate.
M&L earthing complete with galvanised steel earth plate electrode of size 600 x 600 x 6 mm thick buried directly in ground in vertical position (earth pit not less than 2.25 m deep below the normal ground level) with top edge of the earth plate not less than 1.5 m below normal ground level, connected to galvanised earth lead of GI strip 32x6 mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel, all as shown in electrical plate No. 3 connected to earthing test point complete all as specified and directed. Note:- The unit rate shall also include for earth work in any type of soil, PCC 1:3:6 type C1 chamber, RCC 1:1.5:3, type A1 cover slab, 50 mm thick reinforced with 8 mm dia TMT bar @ 140 mm C/C both ways, 10 mm dia plain bar lifting handle embedded in cover slab, 20 mm bore medium grade GI watering pipe, 40 mm bore GI medium grade earth lead protection pipe, funnel, wire mesh, copper lugs, charcoal and common salt in alternate layer etc.
S & F Steel Tubular Swaged Poles complete with and including cast iron base plate, finial taper plug, bolts , nuts & screws, type 410 SP-55(11 Metre long) for fixing HT AB Cable, also including painting to the external exposed surfaces with 2 coats of aluminium paint over 1 coat of red oxide primer and with 2 coats of black bituminous paint over 1 coat of red oxide primer to the external exposed surfaces of steel poles embedded in the ground / concrete after preparation of the surfaces, numbering to the poles, complete in all respect as specified and as directed. Note:- Excavation & Earth Work, concrete for foundation and coping shall only be measured and paid for separately. The poles shall confirm to IS 2713 (Parts 1 to 3) 1980 & tubes for manufacturing of poles shall confirm to IS-1161-1979 incl latest amdts.
M & L for cement concrete (1:3:6) type C-2 (using 40mm graded stone aggrgate) for pole foundation including provision of necessary formwork and finishing the surfaces even & smooth complete all as specified and directed.
M & L for cement concrete (1:2:4) type B-1 (Using 20mm graded stone aggregates) for coping of pole etc including provison of necessary form work and finishing the surfaces even & smooth complete all as specified and directed.
M & L for anticlimbing devices, comprising 2.24 mm dia galvanised steel 2 -stranded barbed wire with 2.00 mm dia barbs wrapped spirally round poles, to a lenghth of 0.5 to 1.0 meter clamped and properly secured or as ordered including clamps., complete all as specified and directed.
S&F Danger notice plate of 1.6mm thick mild steel sheet, vitreous enamelled white, with letters, figures and conventional skull and bones in signal red colour and fixed with and including M.S.clamps, bolts and nuts of approved size for HT, 25x20cm size, complete all as specified and directed.
Supply, jointing and testing cable jointing kit for 11 KV (Earthed) grade cable for outdoor termination, heat shrink type joint, complete with and including jointing materials and accessories suitable for 11KV XLPE insulated armoured aluminium conductor cable of size 95 Sqmm 3 core, complete all as specified and as directed.
S&F Stay assembly having diameter of stay rod 20 mm complete with accessories as shown in electrical plate No. 1 complete including loop type insulator, stay clamps all as specified and as directed NOTE: Excavation, earth work and PCC shall be measured and paid separately under relevant items of the BOQ.
Supply, installation, testing & commissioning of transformer (suitable for trolley mounting) of capacity 500 KVA step down, Energy Efficiency Level 2, outdoor type, 11.0/0.433 KV, 50 Hz, AC double wound core type, copper wound, oil immersed type, naturally air cooled with external cooling tubes, transformer delta connection on HT side & star connection on LV side in accordance with vector symbol DyN 11 (vector group -4) with off-load tap changer on HT side to vary secondary voltage +/-7.5% in equal steps of 2.5% as per IS-1180 (Part-1)- 2014. The voltage regulation shall be as per IS incuding first fill of transformer oil upto appropriate level all as per IS-335, complete all as specified and directed:-
Technical specifications:- (a) 01 No cable end box on HT side consisting of 03 Nos porcelain bushing with bushing brass rods, nuts, washers & cable glands suitable for reception of HT 11000 V grade XLPE insulated heavy duty cables incl glands complete. (b) 01 No cable end box on LT side consisting of 03 Nos porcelain bushing with bushing brass rods, nuts, washers & cable glands suitable for reception of LT 1100 V grade XLPE insulated heavy duty cables incl glands complete. (c) Oil conservator with filter type drain valve & oil level gauge. (d) Explosion vent with double diaphragm & sight glass. (e) Thermometer pocket. (f) Two earthing terminal on tank body to facilitate fixing of 32 x 6 mm Gl strip etc. (g) 01 No thermometer dial type, vapour pressure type having range 0 to 120'C with maxm temperature indicator, re-setting device & marked maxm temp reading point. (h) Rating plate with terminal marking plate. (j) Oil level gauge. (k) Oil drain filter valve. (l) Oil filling port on top cover with plug. (m) Air release valve / plug. (n) 04 Nos plain solid cast steel detachable rollers. (o) First fill of transformer oil confirming to relevant IS & tested upto 60 KV dielectric strength. (p) Inspection cover. (q) Lifting lugs & jack lifting pad & support. (r) Silica gel breather without/ with connecting pipes, first fill of dehydrating agent.
(s) Cover lifting eyes. (t) Oil temperature indicator of approved range, incl shut off valve between conservator & main tank. (u) Additional/ Extra bushing for neutral outside of LV side. NOTE: (i) Design/ drawing/ BOM of the Transformer showing the dimensions is to be obtained from OEM / Authorised Supplier shall be got approved by the contractor from the GE before its placing final order to the manufacturer. (ii) Quoted rate is deemed to be inclusive of Factory Inspection/Testing of the Transformer before dispatch by an E/M Officer nominated by the Accepting Officer & El/SEI Pre-commissioning Inspection charges as & when applicable. (iii) The erection, installation & commissioning of the Transformer shall be carried out under the supervision of OEM/Auth Rep & certificate to this effect shall be submitted duly signed by all concerned i.e. Contr, OEM Auth Rep & Engr-In-Charge. Cost of the same (if any) is deemd to be included in the unit quoted rates. (iv) Unit quoted rates is also deemed to be inclusive of making the earthing connections incl testing complete. (v) Anything missed out in the technical specifications but technically required for efficient working is deemed to be included in the quoted rates.
M&L for Trolley for mounting of transformer with the following speciications:- (a) 4 wheel (Double Axle) Trolley with Spring Suspension, Suitable to Hold Mobile Unit of Size 3810mmX 2032mm (main trolley) and can take a Weight of 5,000KG, Parking Brakes and 2 Nos Screw Jack Assembly. 4mm thick chequered Top plate with 7.50X 16 Tyres and suitable wheel rims and Axle. The Mobile unit Set will be bolted on Frame of Trolley. (b) Front wheels axel should be movable for truning on road. (c) Spray painting of the complete trolly structure/assy with two coat of synthetic enamel paint of approved grade/colour after preparation of surfaces & over a coat of primer of approved grade/type. (d) Cable drum both side 02 Nos of 2 mtr dia for rolling of cables (e) All others fittings and accessories as directed by the Eng-in-Charge NOTE: (i) Design/ drawing/ BOM of the Trolley showing the dimensions is to be obtained from OEM / Authorised Supplier shall be got approved by the contractor from the GE before placing it's final order to the manufacturer/fabricator. (ii) Quoted rate is deemed to be inclusive of Factory Inspection/Testing of the Trolley before dispatch by an E/M Officer nominated by the Accepting Officer (iii) Anything missed out in the technical specifications but technically required for efficient working is deemed to be included in the quoted rates. (iv) Copy of approved BOM/Design/Drawing with dimensions of the 500 KVA Tr shall be made available to the Manufacturer/Fabricator of the Trolley by the Engr-in-Charge.
MS ORIENT ENGINEERING WORKS
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .