Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹6.6 LAccepted-Finance | L1 | Accepted-Finance L1 | |
| 2 | L2₹6.7 L+₹9,684.40 (1.46%)Rejected-Finance R O VILLAGE PO NANGAL KHURD TEHSIL HAROLI DISTRICT UNA HP | L2 | Rejected-Finance L2 |
Tender Value
₹6.5 L
EMD Value
₹13,000
Closing Date
25 Jul 2026, 10:00 amClosed
Executive Engineer HPPWD Solan
near new bus stand Solan
Providing and laying CC work, wood work, painting and distempering and other minor repairs etc.)
2026_PWD_139411_12
No. 4651-58 dated 09.07.2026
Open Tender
Civil Works
Percentage
60 days
Solan
as per SBD
10 documents required · 10 mandatory
₹350
₹13,000
5 Aug 2026
18 Jul 2026
25 Jul 2026
18 Jul 2026
25 Jul 2026
18 Jul 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Demolishing dry brick pitching in floors, drains etc. including stacking of serviceablematerial anddisposal
of unserviceable material within 50 metres lead and lifts , including all incidental charges. | - | Per Cubic meter. | 865.51 | - |
| 2 | Providing and laying cement concrete 1:2:4 (1 Cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size), in position cement concrete of specified grade excluding the cost of centering and shuttering as per H.P. PWD. specification including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges. | 1 | Per Cubic Meter | 6,294.16 | ₹6,287.87 |
| 3 | Providing and fixing 12 mm (Twelve Millimeter) thick flat pressed 3 layer medium density particle board or graded particle board (Grade I) IS: 3087 marked, in ceiling with necessary nails etc. complete (frame work to be paid separately) as per direction of Engineer in charge including carriage of all labour, equipments and materials to various locations through all modes of transportation in all lead & lifts and all incidental charges. | - | Per square meter. | 636.05 | - |
| 4 | Providing and fixing 35 mm thick ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters Stainless Steel butt hinges with necessary screws. complete including carriage of material in all leads and lifts | - | Per square metre | 3,206 | - |
| 5 | Providing and fixing 35 mm Second class teak wood panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-incharge as per H.P.PWD. Specification, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges. | - | Per square meter. | 4,000.5 | - |
| 6 | Providing Sal wood work in frames of false ceiling, partitions etc. sawn and fixed in position with necessary stainless steel screws etc.as per H.P.PWD. Specification, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges. | - | Per Cubic Meter | 91,310.9 | - |
| 7 | Providing wood work in frames of doors,windows,clerestory,windows and other frames wrought,framed and fixed in position in Sal wood wood as per H.P.PWD. Specification, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges. | - | Per Cubic Meter | 95,763.05 | - |
| 8 | Providing and fixing Second class teak wood wire gauge shutters using galvanized mild steel wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 for door, windows and clear story windows with hinges and necessary screws 35mm (thirty five millimeter) thick Kiln seasoned and chemically treated hollock wood as per HP.PWD specification 1990 volume-I, including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges. | 1 | Per square meter. | 3,849.7 | ₹3,845.85 |
| 9 | Providing and fixing anodized aluminum Sliding Door Bolts 250*16 (Two hundred fifty * Sixteen) millimeters size anodized transparent or dyed to required shade and color with screws etc. Complete as per direction of Engineer in Charge as per HP.PWD. Specification, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges. | - | Each | 277.55 | - |
| 10 | Providing and fixing aluminium tower bolts, ISI marked, 200*10 (two hundred fifty into Ten millimeters) anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. Complete as per HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges. | - | Each | 99.35 | - |
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 2.68 MB
BOQ_206638.xls
BOQ • 0.35 MB
SBD.pdf
Tender Documents • 3.17 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .